NC 1964 and 1965 Used Factory Parts For Sale - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*Sharps40* · 05-12-2013, 03:50 PM

This is the last of Ol John Lee and a few unneeded bits from John Lee Jr.

Shipping via USPS and UPS as needed. Postal Money Order for Payment.

1964 C10 Chevy, Brake T-fittings, complete set, used serviceable...LF (3 each 1/4" lines in/out) + RF (2 each 1/4" lines in/out and 1 each 3/16" line out) + RR (1 each rubber hose in and 2 each 3/16" lines out). $15.00

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

1965 Chevy C10 230 I6 points dizzy with cap and coil. Ran great, needs vacuum can but the plate is free and advances/retards. $20.00

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
1964 Chevy C10 Hood hinges, springs sold already. Good function. $20.00

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
1964 Chevy C10 horn, functions. $5.00

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
1964 Chevy C10 Brake Pedal Assembly only....adjustable pushrod is sold. $10.00

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
1964 Chevy C10 Small Back Glass, clean and clear, bout as nice as can be for 49 years old. $20.00

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

I have a pair of 1964 Chevy C10 transmission shifter rods...R/1 and 2/3 for the Muncie SM318 non syncro first gear transmission. These connect from column to trans levers. Had em sold, member dropped off the net w/o sending Money Order or Shipping Address, so they are back up. Functional. $15.00 for the pair.

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

Inner and outer heater boxes and lid, Thrift Heater I believe...outer box w/o motor or core or core straps, inner box still has functional resistor $30.00

1963c-10 · 05-13-2013, 08:24 AM

Hey rich, hold the frame support struts for me. Ill need them on the trailer.

*Sharps40* · 05-13-2013, 08:31 AM

Done. No charge....I shoulda thought of that when you came up for the frame! I'll delete them above.

*Sharps40* · 05-20-2013, 05:09 PM

Current parts...this is all that's left other than the Operators manual and warrenty manual on separate ad.

*Sharps40* · 05-29-2013, 07:29 PM

top

eglide78 · 07-20-2013, 12:47 AM

I'm interested in the '64 fender emblem... 30157

*Sharps40* · 07-20-2013, 06:57 AM

USPS small flat rate box, to keep it from getting squished/broken is about $5.50 shipping to anywhere in the USA. PM me if yer interested.

yellowGT · 07-21-2013, 02:49 AM

How much for the hood hinge springs? Shipped to 75040

*Sharps40* · 07-21-2013, 06:57 AM

Quote:

Originally Posted by yellowGT

How much for the hood hinge springs? Shipped to 75040

As indicated, springs sold already. Just have the hinges left.

**argonaut** · 07-23-2013, 02:09 AM

Horn, shipped to 90815.

*Sharps40* · 07-23-2013, 05:14 AM

Quote:

Originally Posted by argonaut

Horn, shipped to 90815.

Figuring two pounds it adds 9.79 for shipping to that zip. The medium flat rate box is 12.60. (Horn won't fit a small flat rate box.)

bj383ss · 07-25-2013, 06:59 AM

Sharps,

Do you still have the horn? Is it the high not or low note? Would love to have something off of John Lee. Shipping to TX 78641.

Bret

**argonaut** · 07-25-2013, 11:24 AM

Sharps,
So do I interpret correctly that $15 will cover it for the horn or is it more? I'm not in a big hurry.
Let me know your payment details or send me a PM if appropriate. Thanks!
Posted via Mobile Device

*Sharps40* · 07-25-2013, 11:45 AM

Argonaut, sent ya a pm. $15 will cover it well.

BJ383SS: dont' know if its high or low...sounded kinda medium to me....but Argonaut may be takeing it. Will advise if that changes.

bj383ss · 07-25-2013, 06:20 PM

No problem. The one I got from Johns66 had an "H" on it which I assumed meant High note. So I am looking for a low note. Together I think the make the F Note!

Bret

**argonaut** · 07-29-2013, 02:10 AM

Im going to have to pass on the horn. Got mine working after some tinkering. Sorry about that. Passing it on to bj383ss!
Posted via Mobile Device

*Sharps40* · 07-29-2013, 08:11 AM

Okay, Thanks!

Johns66 · 07-29-2013, 08:09 PM

Do you still have the brake pedal with the adjustable push rod?

Thanks,

John

*Sharps40* · 07-29-2013, 08:52 PM

Yep, I still got it. I even have a med flat rate box handy to check and see iffit'll fit! PM me iffin ya want me to check it out, I'll get off my fat butt and go see!

05-12-2013, 03:50 PM	#1
Sharps40 Account Suspended Join Date: Oct 2012 Location: here Posts: 2,408	1964 and 1965 Used Factory Parts For Sale Updated 20 July 13 This is the last of Ol John Lee and a few unneeded bits from John Lee Jr. Shipping via USPS and UPS as needed. Postal Money Order for Payment. 1964 C10 Chevy, Brake T-fittings, complete set, used serviceable...LF (3 each 1/4" lines in/out) + RF (2 each 1/4" lines in/out and 1 each 3/16" line out) + RR (1 each rubber hose in and 2 each 3/16" lines out). $15.00 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx 1965 Chevy C10 230 I6 points dizzy with cap and coil. Ran great, needs vacuum can but the plate is free and advances/retards. $20.00 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx 1964 Chevy C10 Hood hinges, springs sold already. Good function. $20.00 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx 1964 Chevy C10 horn, functions. $5.00 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx 1964 Chevy C10 Brake Pedal Assembly only....adjustable pushrod is sold. $10.00 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx 1964 Chevy C10 Small Back Glass, clean and clear, bout as nice as can be for 49 years old. $20.00 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx I have a pair of 1964 Chevy C10 transmission shifter rods...R/1 and 2/3 for the Muncie SM318 non syncro first gear transmission. These connect from column to trans levers. Had em sold, member dropped off the net w/o sending Money Order or Shipping Address, so they are back up. Functional. $15.00 for the pair. xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx Inner and outer heater boxes and lid, Thrift Heater I believe...outer box w/o motor or core or core straps, inner box still has functional resistor $30.00 Last edited by Sharps40; 10-12-2013 at 09:05 AM.

05-13-2013, 08:24 AM	#2
1963c-10 Registered User Join Date: Nov 2011 Location: fayetteville nc Posts: 10,338	Re: 1964 and 1965 Used Factory Parts For Sale Hey rich, hold the frame support struts for me. Ill need them on the trailer. __________________ 1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer

05-13-2013, 08:31 AM	#3
Sharps40 Account Suspended Join Date: Oct 2012 Location: here Posts: 2,408	Re: 1964 and 1965 Used Factory Parts For Sale Done. No charge....I shoulda thought of that when you came up for the frame! I'll delete them above.

05-20-2013, 05:09 PM	#4
Sharps40 Account Suspended Join Date: Oct 2012 Location: here Posts: 2,408	Re: 1964 and 1965 Used Factory Parts For Sale Current parts...this is all that's left other than the Operators manual and warrenty manual on separate ad.

05-29-2013, 07:29 PM	#5
Sharps40 Account Suspended Join Date: Oct 2012 Location: here Posts: 2,408	Re: 1964 and 1965 Used Factory Parts For Sale top

07-20-2013, 12:47 AM	#6
eglide78 Registered User Join Date: Jul 2013 Location: Dallas, GA Posts: 30	Re: 1964 and 1965 Used Factory Parts For Sale I'm interested in the '64 fender emblem... 30157

07-20-2013, 06:57 AM	#7
Sharps40 Account Suspended Join Date: Oct 2012 Location: here Posts: 2,408	Re: 1964 and 1965 Used Factory Parts For Sale USPS small flat rate box, to keep it from getting squished/broken is about $5.50 shipping to anywhere in the USA. PM me if yer interested.

07-21-2013, 02:49 AM	#8
yellowGT Registered User Join Date: Jan 2006 Location: Garland, TX Posts: 970	Re: 1964 and 1965 Used Factory Parts For Sale How much for the hood hinge springs? Shipped to 75040 __________________ '84 swb chevy '69 swb chevy '68 swb chevy '95 Impala ss-sold '89 chevy crew cab dually 3+3

07-23-2013, 02:09 AM	#10
argonaut Senior Member Join Date: Aug 2008 Location: Long Beach, CA Posts: 1,813	Re: 1964 and 1965 Used Factory Parts For Sale Horn, shipped to 90815. __________________ Jason M. @argonaut62 1972 K5 Blazer CST, Turquoise 1966 K20 Short Fleet Pickup, Big Ugly 1964 C10 Short Fleet, Gertrude 2001 Porsche 911 Carrera 1996 Ford Bronco XLT 1980 Jeep Wagoneer 2008 Honda CBR1000RR 2005 Honda RC51 1981 Honda CB750C No dis-assemble Johnny Five! No dis-assemble!

07-25-2013, 06:59 AM	#12
bj383ss Registered User Join Date: Sep 2012 Location: Leander, TX Posts: 969	Re: 1964 and 1965 Used Factory Parts For Sale Sharps, Do you still have the horn? Is it the high not or low note? Would love to have something off of John Lee. Shipping to TX 78641. Bret __________________ 64' Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=586955

07-25-2013, 11:24 AM	#13
argonaut Senior Member Join Date: Aug 2008 Location: Long Beach, CA Posts: 1,813	Re: 1964 and 1965 Used Factory Parts For Sale Sharps, So do I interpret correctly that $15 will cover it for the horn or is it more? I'm not in a big hurry. Let me know your payment details or send me a PM if appropriate. Thanks! Posted via Mobile Device __________________ Jason M. @argonaut62 1972 K5 Blazer CST, Turquoise 1966 K20 Short Fleet Pickup, Big Ugly 1964 C10 Short Fleet, Gertrude 2001 Porsche 911 Carrera 1996 Ford Bronco XLT 1980 Jeep Wagoneer 2008 Honda CBR1000RR 2005 Honda RC51 1981 Honda CB750C No dis-assemble Johnny Five! No dis-assemble!

07-25-2013, 11:45 AM	#14
Sharps40 Account Suspended Join Date: Oct 2012 Location: here Posts: 2,408	Re: 1964 and 1965 Used Factory Parts For Sale Argonaut, sent ya a pm. $15 will cover it well. BJ383SS: dont' know if its high or low...sounded kinda medium to me....but Argonaut may be takeing it. Will advise if that changes.

07-25-2013, 06:20 PM	#15
bj383ss Registered User Join Date: Sep 2012 Location: Leander, TX Posts: 969	Re: 1964 and 1965 Used Factory Parts For Sale No problem. The one I got from Johns66 had an "H" on it which I assumed meant High note. So I am looking for a low note. Together I think the make the F Note! Bret __________________ 64' Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=586955

07-29-2013, 02:10 AM	#16
argonaut Senior Member Join Date: Aug 2008 Location: Long Beach, CA Posts: 1,813	Re: 1964 and 1965 Used Factory Parts For Sale Im going to have to pass on the horn. Got mine working after some tinkering. Sorry about that. Passing it on to bj383ss! Posted via Mobile Device __________________ Jason M. @argonaut62 1972 K5 Blazer CST, Turquoise 1966 K20 Short Fleet Pickup, Big Ugly 1964 C10 Short Fleet, Gertrude 2001 Porsche 911 Carrera 1996 Ford Bronco XLT 1980 Jeep Wagoneer 2008 Honda CBR1000RR 2005 Honda RC51 1981 Honda CB750C No dis-assemble Johnny Five! No dis-assemble!

07-29-2013, 08:11 AM	#17
Sharps40 Account Suspended Join Date: Oct 2012 Location: here Posts: 2,408	Re: 1964 and 1965 Used Factory Parts For Sale Okay, Thanks!



Register or Log In To remove these advertisements.

07-29-2013, 08:09 PM	#18
Johns66 Registered User Join Date: Mar 2013 Location: Waco, Texas Posts: 411	Re: 1964 and 1965 Used Factory Parts For Sale Do you still have the brake pedal with the adjustable push rod? Thanks, John

07-29-2013, 08:52 PM	#19
Sharps40 Account Suspended Join Date: Oct 2012 Location: here Posts: 2,408	Re: 1964 and 1965 Used Factory Parts For Sale Yep, I still got it. I even have a med flat rate box handy to check and see iffit'll fit! PM me iffin ya want me to check it out, I'll get off my fat butt and go see!

Register or Log In To remove these advertisements.