|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
09-24-2013, 08:25 PM
|
#1 |
|
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,936
|
Re: 2003 LSx swap thread...here we go
5 pictures at a time it's going to be a slow process!
 It's going to take longer doing the updates than the work!I bought some cheap paint at wally world for the brackets and will by motor paint when I get it prepped. I'm thinking about painting the fan blades Red! What... I primered everything and then sprayed the metalic silver to them. I will go back and do the pulleys black along with the PS pump. 
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. |
|
|
|
09-24-2013, 08:30 PM
|
#2 |
|
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,936
|
Re: 2003 LSx swap thread...here we go
I think is going to turnout pretty after it's all said and done. I plan to just take my time on this and do it slow and right the first time I hope. I got the front brackets all primered and one coat of paint on them and they are drying over night.
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. |
|
|
|
|
09-24-2013, 08:37 PM
|
#3 |
|
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,936
|
Re: 2003 LSx swap thread...here we go
I plan to paint the whole motor except for the heads once I get it home and cleaned up. I painted the back plastic of the alternator RED!That's what gave me the idea to paint the fan blades red!
The picture of me holding the coil wiring it's all dirty and I wiped it off 2 but it just looks nasty to me. Is that covering heat insulated are will regular black tape with conduit be OK? That's it for tonight I'm done. Got to get the motor tomorrow and close up the pool so it may not get nothing done...yea right! 
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. |
|
|
|
|
| Bookmarks |
|
|
Hybrid Mode
