Project Park Service - 67 K10 shorty - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Twisted78SS · 10-10-2013, 11:54 PM

I've been a bit sidetracked the past couple of weeks working on my son's 68, but I have managed to get the bottom end of the motor back together. I'm going with a custom ground cam which is basically a comp Extreme 4x4 12-239-3 but was ground on a 110* lobe separation instead of 111.

For heads, I think I'm going to run a set I have already, they are Edelbrock Performer RPM 60899 2.02 / 1.70 and to top things off I have a wieand intake.

As soon as I get that together I'll work on the floors and some other rust repair.

Pics coming soon.

10-10-2013, 11:54 PM	#4
Twisted78SS Wide n'Low Join Date: Jan 2007 Location: La Center, WA Posts: 1,511	Re: Project Park Service - 67 K10 shorty I've been a bit sidetracked the past couple of weeks working on my son's 68, but I have managed to get the bottom end of the motor back together. I'm going with a custom ground cam which is basically a comp Extreme 4x4 12-239-3 but was ground on a 110* lobe separation instead of 111. For heads, I think I'm going to run a set I have already, they are Edelbrock Performer RPM 60899 2.02 / 1.70 and to top things off I have a wieand intake. As soon as I get that together I'll work on the floors and some other rust repair. Pics coming soon. __________________ Trippin Hazard.. 67 swb, Gold Member.. 68 Suburban Air Force Retired



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.