|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
11-26-2013, 05:00 AM
|
#1 |
|
Registered User
Join Date: Sep 2013
Location: Seguin, Texas
Posts: 24
|
need help choosing proper year lift kit
hey guys, i have a truck , the cab is a 76 the bed is an 80's(square gascap covers) and the front clips an 85, and i have no clue about the frame, and its a bigblock. i want to get some 6in lift springs for the front from roughcountry.com but they have 73-76, and 77-87. i dont know which kit to get.
whats the difference between the front suspension set up?
__________________
My Truck is my Life 
|
|
|
|
11-27-2013, 03:51 AM
|
#2 |
|
Registered User
Join Date: Jan 2009
Location: Louisville,Ky
Posts: 5,811
|
Re: need help choosing proper year lift kit
Look for a vin on the frame some say its under where the drivers door is some say passenger side same place.If you find a vin it could tell us what year the frame is if its different from the cabs vin.
|
|
|
|
|
11-27-2013, 04:13 AM
|
#3 |
|
Registered User
Join Date: Sep 2009
Location: Beaverton, OR from WA State
Posts: 1,515
|
Re: need help choosing proper year lift kit
VIN is stamped on top of passenger side frame rail near cab/box gap, I have personally seen it under the cab area, another member has a picture posted of it just behind the first bed bolt. Early ones (possibly yours) were stamped on the top of the frame near where the fuel pump is on the engine.
Frame (aft): This post. Frame (fore): This post.
__________________
Devin 1983 GMC High Sierra 2500, 4x4, RC/LB, 400 S.B., SM-465, NP-208, Corporate 10 bolt & 9.5" 14 bolt 1996 GMC Sierra SLE 3500 DRW, 4x4, EC/LB, Vortec 454, NV-4500, BW-4401, AAM 925 & AAM 1050 1997 GMC Sierra SLT 1500 4x4, Z71/F44, EC/SB, Vortec 350 My Introduction with my '83s History New Daily, the '96 |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
