Wanted: Replacement side view mirror. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Zurbo · 12-14-2003, 06:37 AM

Had a slight boo-boo and busted my passenger side mirror.
No other damage except my pride and a dent in the mailbox.

Seems like the replacement mirrors I seen have a stud on them perpendicular to the mirror.

These are parallel with the mirror and are NOT metal as I found out. I always thought they were...

Here is a piccy of the type of mirror I'm looking for.

Drivers side:

Busted passenger side:

If you have something that will work, reply or drop me a PM and let me know.
Thanks,
Richard Z.

OhioDan · 12-14-2003, 07:21 AM

Looks like all you need to do is go and buy two new mirror heads. You should be able to get them at most parts houses? I've got just what you need out in the garage, but no more than they cost, it'd probably be cheaper to buy the new ones.

**old Rusty C10** · 12-14-2003, 12:57 PM

if you need the entire arms assembly too i may have it for ya i have one extra long arm mirror at least the arms that bolt to the lower part of the door are long i can measure if ya need em figure about $25 to your door including shipping cause packaging is kinda high ( id have to wrap it in bubble wrap and get a large box for it so it dont bust in shipment)

Zurbo · 12-15-2003, 03:25 PM

I'll do some checking around at the truck place here in town and see what they have. The auto parts stores mirror heads don't bolt on the same way so I would have to replace the whole arm to use them.

724x4a/cchevy · 12-15-2003, 07:59 PM

Thats potmetal for ya!

sewanhaka62 · 12-18-2003, 07:35 AM

hi
i have the type of mirrors that you need[ chrome or painted]
if you haven't bought any yet --let me know so i can look for them
--in the moving stage at this time
thanks--bob

12-14-2003, 06:37 AM	#1
Zurbo Registered User Join Date: May 2001 Location: Bel Aire, Kansas, USA Posts: 186	Wanted: Replacement side view mirror. Had a slight boo-boo and busted my passenger side mirror. No other damage except my pride and a dent in the mailbox. Seems like the replacement mirrors I seen have a stud on them perpendicular to the mirror. These are parallel with the mirror and are NOT metal as I found out. I always thought they were... Here is a piccy of the type of mirror I'm looking for. Drivers side: Busted passenger side: If you have something that will work, reply or drop me a PM and let me know. Thanks, Richard Z. __________________ Zurbo's Chevy - 1972 Black/White Cheyenne Super. 402 Big Block /THD 400, factory air and tilt. My other Chevy - 1998 Camaro SS

12-14-2003, 07:21 AM	#2
OhioDan Registered User Join Date: Apr 2002 Location: New Carlisle, Ohio,USA Posts: 1,404	Looks like all you need to do is go and buy two new mirror heads. You should be able to get them at most parts houses? I've got just what you need out in the garage, but no more than they cost, it'd probably be cheaper to buy the new ones. __________________ LIFE AIN'T EASY WHEN YER FAT AND GREASY! GMC= Got More Class! 1970 GMC LWB, Fleetside, 350/4spd, Flowmaster "40's", 2002 GMC 16" Rallies, cowl hood,and added a bunch of options that weren't there when I started.

12-14-2003, 12:57 PM	#3
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,277	if you need the entire arms assembly too i may have it for ya i have one extra long arm mirror at least the arms that bolt to the lower part of the door are long i can measure if ya need em figure about $25 to your door including shipping cause packaging is kinda high ( id have to wrap it in bubble wrap and get a large box for it so it dont bust in shipment) __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

12-15-2003, 03:25 PM	#4
Zurbo Registered User Join Date: May 2001 Location: Bel Aire, Kansas, USA Posts: 186	I'll do some checking around at the truck place here in town and see what they have. The auto parts stores mirror heads don't bolt on the same way so I would have to replace the whole arm to use them. __________________ Zurbo's Chevy - 1972 Black/White Cheyenne Super. 402 Big Block /THD 400, factory air and tilt. My other Chevy - 1998 Camaro SS

12-15-2003, 07:59 PM	#5
724x4a/cchevy Self-proclaimed LED man Join Date: Nov 2003 Location: Harrisburg, Missouri Posts: 1,021	Thats potmetal for ya! __________________ My LED Website My Photobucket Album of LED's Ask me about hand-made custom L.E.D brake and reverse lights. <- LINK I also do LED: -Third Brake/Cargo -Brake (truck and burb) -Reverse (truck and burb) -67-68 Front Turn Signals -69-70 Front Turn Signals -71-72 Front Turn Signals -GMC Front Turn Signals I can also do custom lights for other vehicles....i did a set for a AMC Gremlin once Norwood Survivor

12-18-2003, 07:35 AM	#6
sewanhaka62 Registered User Join Date: Jan 2002 Location: berwick,penn Posts: 98	mirrors hi i have the type of mirrors that you need[ chrome or painted] if you haven't bought any yet --let me know so i can look for them --in the moving stage at this time thanks--bob



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.