4l80E/NP205 (Yes, another one)

[rs74]

I have been told that you can get a 91 year model only from a diesel and it will have a stand alone harness and module. Thats sounds alot better if you could find one. Supposedly 91 4l80e diesels had the stand alone and would bolt to the 205. From what I here anyway.

[Gobuffalo]

Thought I would give you some pics installed.

[Gobuffalo]

Here's the other side without the shifters in the way.

By the way, Northwest Fab makes an adapter that is .600 thick to bolt these 2 together. It what's can be used with a 4x4 trans without cutting the shaft.

[Gobuffalo]

Had to give the adapter foot a trim on the little cast gusset, so the pan won't hit and can be easily removed.

[Gobuffalo]

Been working on this swap some more.
Almost put $400.00 out for a crossmember setup then decided to see exactly why my crossmember won't work. Well, it's too narrow. I did some measuring and found if you cut it right below where the upper and lower pieces bolt together, it dropped right in.

[Gobuffalo]

After I cut the upper piece.

[Gobuffalo]

Here's where I cut the lower or main piece. I used a sawsall.