The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > Info Center > FAQ Truck Tech

Web 67-72chevytrucks.com


 
 
Thread Tools Display Modes
Old 05-23-2011, 10:14 AM   #26
fun in dirt
Registered User
 
fun in dirt's Avatar
 
Join Date: Jan 2007
Location: Mississippi
Posts: 2,121
Re: "The Bucket" project diary

Good progress this week...thanks to my wonderful husband!
The crossover steering is finished (forgot to get a pic).
Transmission took to PTC in Muscleshoals, AL for rebuild.
Fabbed up rear spring hangers & in place.
Repairs done to rear frame , so could mount hangers & have sound snatch points & foundation for back bumper built.
Attached Images
   
__________________
'72 C to K20 "Cannibalizer" http://67-72chevytrucks.com/vboard/s...32#post8653432
'85 K30 "Big Nassy"
'01 2500 Suburban ...party wagon & tow truck
'06 Silverado SS...DD
'06 C1500 WT...DD
'07 Classic C1500 WT...DD
Built & sold cause can't keep 'em all:
'72 Blazer "The Bucket" http://67-72chevytrucks.com/vboard/s...d.php?t=433190
'55 Chevy straight axle gasser https://www.trifive.com/forums/showthread.php?t=173938
'69 Pro Street Chevelle http://www.chevelles.com/forums/showthread.php?t=332541
'86 M1031 CUCV http://67-72chevytrucks.com/vboard/s...d.php?t=553619
fun in dirt is offline  
Old 06-01-2011, 10:21 AM   #27
fun in dirt
Registered User
 
fun in dirt's Avatar
 
Join Date: Jan 2007
Location: Mississippi
Posts: 2,121
Re: "The Bucket" project diary

Long Memorial weekend made for lots of good progress.
Marked off lots of little items on the "things to do list"... repairing fuel line, wiring in back, new conversion u-joints in the rear driveshaft & painted up, mounted new flex brake lines, ect....But as I mark these off, constantly thinking of other things that need doing & adding to the list.
After finishing the rear frame tubing & POR on all that, made a back bumper & got that all welded in. As strong as this is I want be afraid to snatch & jerk those Super Duty Fords & Jeeps out.
Took the D60 front back out from under the truck to finish welding a few pieces & paint it up.
Yesterday rode to Muscle Shoals, AL & picked up the T400 had PTC rebuild along with a new convertor.
Attached Images
     
__________________
'72 C to K20 "Cannibalizer" http://67-72chevytrucks.com/vboard/s...32#post8653432
'85 K30 "Big Nassy"
'01 2500 Suburban ...party wagon & tow truck
'06 Silverado SS...DD
'06 C1500 WT...DD
'07 Classic C1500 WT...DD
Built & sold cause can't keep 'em all:
'72 Blazer "The Bucket" http://67-72chevytrucks.com/vboard/s...d.php?t=433190
'55 Chevy straight axle gasser https://www.trifive.com/forums/showthread.php?t=173938
'69 Pro Street Chevelle http://www.chevelles.com/forums/showthread.php?t=332541
'86 M1031 CUCV http://67-72chevytrucks.com/vboard/s...d.php?t=553619
fun in dirt is offline  
Old 06-13-2011, 09:49 AM   #28
fun in dirt
Registered User
 
fun in dirt's Avatar
 
Join Date: Jan 2007
Location: Mississippi
Posts: 2,121
Re: "The Bucket" project diary

Actually drove the Bucket down the road yesterday!
Got everything under the truck painted & lots of odd & end items finished. Then Friday put the frontend back under it for the final time. Spent most of Saturday installing driveshafts, shocks & working on the brakes.
Got the body trimmed so the rear tires don't rub; only lack trimming the front.
But it was good enough for a test drive!
First test was a few laps around the yard & all was good. The crossover steering setup is way better than the original steering ever felt. Then made a short trip down the road - it handles great!
From the ground to middle of the front wheel well opening was 37" before & now it's 44" high!
Attached Images
     
__________________
'72 C to K20 "Cannibalizer" http://67-72chevytrucks.com/vboard/s...32#post8653432
'85 K30 "Big Nassy"
'01 2500 Suburban ...party wagon & tow truck
'06 Silverado SS...DD
'06 C1500 WT...DD
'07 Classic C1500 WT...DD
Built & sold cause can't keep 'em all:
'72 Blazer "The Bucket" http://67-72chevytrucks.com/vboard/s...d.php?t=433190
'55 Chevy straight axle gasser https://www.trifive.com/forums/showthread.php?t=173938
'69 Pro Street Chevelle http://www.chevelles.com/forums/showthread.php?t=332541
'86 M1031 CUCV http://67-72chevytrucks.com/vboard/s...d.php?t=553619
fun in dirt is offline  
Old 06-13-2011, 09:56 AM   #29
fun in dirt
Registered User
 
fun in dirt's Avatar
 
Join Date: Jan 2007
Location: Mississippi
Posts: 2,121
Re: "The Bucket" project diary

Axles - Phase 1...COMPLETED

Hopefully by end of the week I can have everything cleaned up good & drive this beast to work Friday!
Looks a little tougher now than before.
Attached Images
  
__________________
'72 C to K20 "Cannibalizer" http://67-72chevytrucks.com/vboard/s...32#post8653432
'85 K30 "Big Nassy"
'01 2500 Suburban ...party wagon & tow truck
'06 Silverado SS...DD
'06 C1500 WT...DD
'07 Classic C1500 WT...DD
Built & sold cause can't keep 'em all:
'72 Blazer "The Bucket" http://67-72chevytrucks.com/vboard/s...d.php?t=433190
'55 Chevy straight axle gasser https://www.trifive.com/forums/showthread.php?t=173938
'69 Pro Street Chevelle http://www.chevelles.com/forums/showthread.php?t=332541
'86 M1031 CUCV http://67-72chevytrucks.com/vboard/s...d.php?t=553619
fun in dirt is offline  
Old 06-20-2011, 09:38 AM   #30
fun in dirt
Registered User
 
fun in dirt's Avatar
 
Join Date: Jan 2007
Location: Mississippi
Posts: 2,121
Re: "The Bucket" project diary

Top off, bikini on, everything cleaned up good & made a good test cruise down the Natchez Trace Sunday.
Attached Images
  
__________________
'72 C to K20 "Cannibalizer" http://67-72chevytrucks.com/vboard/s...32#post8653432
'85 K30 "Big Nassy"
'01 2500 Suburban ...party wagon & tow truck
'06 Silverado SS...DD
'06 C1500 WT...DD
'07 Classic C1500 WT...DD
Built & sold cause can't keep 'em all:
'72 Blazer "The Bucket" http://67-72chevytrucks.com/vboard/s...d.php?t=433190
'55 Chevy straight axle gasser https://www.trifive.com/forums/showthread.php?t=173938
'69 Pro Street Chevelle http://www.chevelles.com/forums/showthread.php?t=332541
'86 M1031 CUCV http://67-72chevytrucks.com/vboard/s...d.php?t=553619
fun in dirt is offline  
Old 06-21-2011, 08:08 AM   #31
chevy2racr
So Many Ideas, So Little Money
 
chevy2racr's Avatar
 
Join Date: Sep 2001
Location: Marshalltown, IA
Posts: 1,610
Re: "The Bucket" project diary

Gotta Love those big slots! Nice truck you got there!
Attached Images
 
__________________
72 Blazer 3/4 ton running gear 4.10s NP205/TH350 350 4in lift half doors
71 C10 with 454
99 S-10 5.1L SBC 700R4
09 Malibu

Marshalltown, Iowa
chevy2racr is offline  
Old 06-21-2011, 09:09 AM   #32
Tom Vogel
2WD Jimmy
 
Tom Vogel's Avatar
 
Join Date: Mar 2005
Location: Davis County, Utah
Posts: 2,565
Re: "The Bucket" project diary

Very, very. Nice.
Tom Vogel is offline  
Old 06-23-2011, 10:50 AM   #33
fun in dirt
Registered User
 
fun in dirt's Avatar
 
Join Date: Jan 2007
Location: Mississippi
Posts: 2,121
Re: "The Bucket" project diary

So excited I figured out how to make a video!
http://rides.webshots.com/video/3045...03633124sTnenD
__________________
'72 C to K20 "Cannibalizer" http://67-72chevytrucks.com/vboard/s...32#post8653432
'85 K30 "Big Nassy"
'01 2500 Suburban ...party wagon & tow truck
'06 Silverado SS...DD
'06 C1500 WT...DD
'07 Classic C1500 WT...DD
Built & sold cause can't keep 'em all:
'72 Blazer "The Bucket" http://67-72chevytrucks.com/vboard/s...d.php?t=433190
'55 Chevy straight axle gasser https://www.trifive.com/forums/showthread.php?t=173938
'69 Pro Street Chevelle http://www.chevelles.com/forums/showthread.php?t=332541
'86 M1031 CUCV http://67-72chevytrucks.com/vboard/s...d.php?t=553619
fun in dirt is offline  
Old 06-23-2011, 03:56 PM   #34
swyfor5
Registered User
 
swyfor5's Avatar
 
Join Date: May 2007
Location: Marion, Mi.
Posts: 2,429
Re: "The Bucket" project diary

Real nice build! Awesome video too!
swyfor5 is offline  
Old 06-23-2011, 09:02 PM   #35
jaros44sr
Senior Member
 
jaros44sr's Avatar
 
Join Date: May 2006
Location: Philadelphia, Pa. 19454
Posts: 9,691
Re: "The Bucket" project diary

well done, looks really nice! Would like to see more bikini pics...
__________________
Semper Fi...Uncle Sam, you da man

All parts offered to help are free, unless otherwise noted

Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training
SAFETY FIRST

AS usual, off topic

They say your mind goes second, can't remember the first


Jim
jaros44sr is offline  
Old 06-23-2011, 09:11 PM   #36
y5mgisi
Second Chance Program
 
y5mgisi's Avatar
 
Join Date: Jun 2006
Location: Portland, OR
Posts: 2,642
Re: "The Bucket" project diary

Looks great! And i just gotta say that its so strange to me that there are womens out there that not only tolerate the truck thing, and not only support it, but are actually into it too! Blows my mind i tell ya! Good job!
y5mgisi is offline  
Old 06-23-2011, 09:54 PM   #37
swyfor5
Registered User
 
swyfor5's Avatar
 
Join Date: May 2007
Location: Marion, Mi.
Posts: 2,429
Re: "The Bucket" project diary

Man, you should meet my wife! She is the greatest, right beside me all the way, no matter what we do. 4X4 to the core, helping with funding for the resto, etc. No hijack intended here, great pic's- funindirt! Keep em coming!
swyfor5 is offline  
Old 06-27-2011, 10:40 AM   #38
fun in dirt
Registered User
 
fun in dirt's Avatar
 
Join Date: Jan 2007
Location: Mississippi
Posts: 2,121
Re: "The Bucket" project diary

Quote:
Originally Posted by jaros44sr View Post
Would like to see more bikini pics...
Well my bikini doesn't fit me as good as it used to so I'll show you these instead
A Besttop came with the Blazer when I bought it, but most of the windows were torn out & alot of the hardware was missing. So when we built the full cage, I had the idea to cut the old softtop up & add some d-rings into the cage for it's tie down points. Went to Walmart & bought some black straps; had them sewn to the top & also some of the edges where I cut it sewn. I kept my eyes open & eventually found another complete good used Bestop on Craigslist for cheap for wintertime use. That way both tops use the same windshield snaps. It all worked out great!
Attached Images
   
__________________
'72 C to K20 "Cannibalizer" http://67-72chevytrucks.com/vboard/s...32#post8653432
'85 K30 "Big Nassy"
'01 2500 Suburban ...party wagon & tow truck
'06 Silverado SS...DD
'06 C1500 WT...DD
'07 Classic C1500 WT...DD
Built & sold cause can't keep 'em all:
'72 Blazer "The Bucket" http://67-72chevytrucks.com/vboard/s...d.php?t=433190
'55 Chevy straight axle gasser https://www.trifive.com/forums/showthread.php?t=173938
'69 Pro Street Chevelle http://www.chevelles.com/forums/showthread.php?t=332541
'86 M1031 CUCV http://67-72chevytrucks.com/vboard/s...d.php?t=553619
fun in dirt is offline  
Old 01-11-2013, 11:30 AM   #39
fun in dirt
Registered User
 
fun in dirt's Avatar
 
Join Date: Jan 2007
Location: Mississippi
Posts: 2,121
Re: "The Bucket" project diary

Time to start on PHASE 2
A friend has good running 350 that he is willing to swap us for some work on his 4wd. So since this is a budget build kind of project, gonna go that route instead of a crate 383 for now. This "new" motor is out of a 91 1ton & TBI, but plan on just getting alum intake & carb instead of the hassle with sensors & such. My current 350 has gotten so weak & occasionally only wants to hit on 6 or 7 cylinders, in addition to a qt of oil every tank of gas. But then again it has been doing this for 6yrs, is still running & never left me stranded on the side of the road
First things first - wiring - my favorite thing (for real)! When got this Blazer I was surprised it hadn't burnt to the ground driving it home. After replacing several wires, splicing & lots of elec tape it was no longer scary, but still a hacked up mess; major pet peeve. Installed an American Autowire Classic Update harness in a '67 Chevelle a few years ago & worked great. So got me the Builder 19 version yesterday...can't wait to get started!!!
Attached Images
 
__________________
'72 C to K20 "Cannibalizer" http://67-72chevytrucks.com/vboard/s...32#post8653432
'85 K30 "Big Nassy"
'01 2500 Suburban ...party wagon & tow truck
'06 Silverado SS...DD
'06 C1500 WT...DD
'07 Classic C1500 WT...DD
Built & sold cause can't keep 'em all:
'72 Blazer "The Bucket" http://67-72chevytrucks.com/vboard/s...d.php?t=433190
'55 Chevy straight axle gasser https://www.trifive.com/forums/showthread.php?t=173938
'69 Pro Street Chevelle http://www.chevelles.com/forums/showthread.php?t=332541
'86 M1031 CUCV http://67-72chevytrucks.com/vboard/s...d.php?t=553619
fun in dirt is offline  
Old 01-12-2013, 12:09 AM   #40
Blazer383
Registered User
 
Join Date: Jan 2013
Location: Deltona, FL
Posts: 23
Re: "The Bucket" project diary

Quote:
Originally Posted by fun in dirt View Post
Since so close to having both axles finished, we decided to take advantage of the long Easter weekend to start disassembly. Our neighbor is very gracious & lets us use his tractor at will... this was extremely helpful in getting the Bucket set up on the "operation table".
The stock springs are shot so torching them was the quickest way to get it all out. The 12 bolt & D44 look so little (and are) after fooling with the 1 ton stuff the past few months.
After several hours of scrapping old mud & grease, 1gallon of industrial Greased Lighning, and 2 cans of oven cleaner, the underside was ready and got the pressure washer. Needless to say a long shower was priceless that night.
Please talk to my wife and convince her to come out into the garage and help build our Blazer. I will be watching this build and keep up the great work.
Blazer383 is offline  
Old 01-15-2013, 11:08 AM   #41
bk04z66
Registered User
 
Join Date: Jun 2012
Location: mebane,nc
Posts: 120
Re: "The Bucket" project diary

Very nice project! You might want to try and find some cheap 96+ vortec heads to replace the TBI heads on that engine. The TBI heads are really, really bad.
bk04z66 is offline  
Old 01-16-2013, 11:19 AM   #42
fun in dirt
Registered User
 
fun in dirt's Avatar
 
Join Date: Jan 2007
Location: Mississippi
Posts: 2,121
Re: "The Bucket" project diary

Quote:
Originally Posted by bk04z66 View Post
Very nice project! You might want to try and find some cheap 96+ vortec heads to replace the TBI heads on that engine. The TBI heads are really, really bad.
Glad you said that! My bro-in-law just pulled the motor out of his '97 truck cause a rod knocking & going to replace it...maybe I can get his heads
__________________
'72 C to K20 "Cannibalizer" http://67-72chevytrucks.com/vboard/s...32#post8653432
'85 K30 "Big Nassy"
'01 2500 Suburban ...party wagon & tow truck
'06 Silverado SS...DD
'06 C1500 WT...DD
'07 Classic C1500 WT...DD
Built & sold cause can't keep 'em all:
'72 Blazer "The Bucket" http://67-72chevytrucks.com/vboard/s...d.php?t=433190
'55 Chevy straight axle gasser https://www.trifive.com/forums/showthread.php?t=173938
'69 Pro Street Chevelle http://www.chevelles.com/forums/showthread.php?t=332541
'86 M1031 CUCV http://67-72chevytrucks.com/vboard/s...d.php?t=553619
fun in dirt is offline  
Old 01-16-2013, 11:50 AM   #43
fun in dirt
Registered User
 
fun in dirt's Avatar
 
Join Date: Jan 2007
Location: Mississippi
Posts: 2,121
Re: "The Bucket" project diary

Brought what was left of '91 truck home & got the motor out of frame. Put on the stand & took off all the extras & intake to see what we really had to work with...looks good & clean on the inside!!!!
Attached Images
  
__________________
'72 C to K20 "Cannibalizer" http://67-72chevytrucks.com/vboard/s...32#post8653432
'85 K30 "Big Nassy"
'01 2500 Suburban ...party wagon & tow truck
'06 Silverado SS...DD
'06 C1500 WT...DD
'07 Classic C1500 WT...DD
Built & sold cause can't keep 'em all:
'72 Blazer "The Bucket" http://67-72chevytrucks.com/vboard/s...d.php?t=433190
'55 Chevy straight axle gasser https://www.trifive.com/forums/showthread.php?t=173938
'69 Pro Street Chevelle http://www.chevelles.com/forums/showthread.php?t=332541
'86 M1031 CUCV http://67-72chevytrucks.com/vboard/s...d.php?t=553619
fun in dirt is offline  
Old 01-25-2013, 10:35 AM   #44
fun in dirt
Registered User
 
fun in dirt's Avatar
 
Join Date: Jan 2007
Location: Mississippi
Posts: 2,121
Re: "The Bucket" project diary

Started working on my center console. Truck currently has SM465 that will be replaced with the new turbo400 that's been sitting in the shop floor. So need a good place for the auto shifter to be mounted. I've always wanted to have a cool console with all sorts of switches & cubby holes!
Attached Images
  
__________________
'72 C to K20 "Cannibalizer" http://67-72chevytrucks.com/vboard/s...32#post8653432
'85 K30 "Big Nassy"
'01 2500 Suburban ...party wagon & tow truck
'06 Silverado SS...DD
'06 C1500 WT...DD
'07 Classic C1500 WT...DD
Built & sold cause can't keep 'em all:
'72 Blazer "The Bucket" http://67-72chevytrucks.com/vboard/s...d.php?t=433190
'55 Chevy straight axle gasser https://www.trifive.com/forums/showthread.php?t=173938
'69 Pro Street Chevelle http://www.chevelles.com/forums/showthread.php?t=332541
'86 M1031 CUCV http://67-72chevytrucks.com/vboard/s...d.php?t=553619
fun in dirt is offline  
Old 01-25-2013, 12:06 PM   #45
72blaz
Registered User
 
72blaz's Avatar
 
Join Date: Dec 2012
Location: Trinity, Florida
Posts: 104
Re: "The Bucket" project diary

very creative center console.. I really like your build so far....
__________________
1972 Chevy Blazer


Check out my build:

http://67-72chevytrucks.com/vboard/s...d.php?t=560741
72blaz is offline  
Old 01-30-2013, 10:52 AM   #46
fun in dirt
Registered User
 
fun in dirt's Avatar
 
Join Date: Jan 2007
Location: Mississippi
Posts: 2,121
Re: "The Bucket" project diary

Progress on the console....thanks to a wonderful husband!
Attached Images
 
__________________
'72 C to K20 "Cannibalizer" http://67-72chevytrucks.com/vboard/s...32#post8653432
'85 K30 "Big Nassy"
'01 2500 Suburban ...party wagon & tow truck
'06 Silverado SS...DD
'06 C1500 WT...DD
'07 Classic C1500 WT...DD
Built & sold cause can't keep 'em all:
'72 Blazer "The Bucket" http://67-72chevytrucks.com/vboard/s...d.php?t=433190
'55 Chevy straight axle gasser https://www.trifive.com/forums/showthread.php?t=173938
'69 Pro Street Chevelle http://www.chevelles.com/forums/showthread.php?t=332541
'86 M1031 CUCV http://67-72chevytrucks.com/vboard/s...d.php?t=553619
fun in dirt is offline  
Old 02-05-2013, 06:23 PM   #47
fun in dirt
Registered User
 
fun in dirt's Avatar
 
Join Date: Jan 2007
Location: Mississippi
Posts: 2,121
Re: "The Bucket" project diary

Still gotta cut out slot for transfer shifter & few other finishing touches, but I really like how it all turned out!
Attached Images
  
__________________
'72 C to K20 "Cannibalizer" http://67-72chevytrucks.com/vboard/s...32#post8653432
'85 K30 "Big Nassy"
'01 2500 Suburban ...party wagon & tow truck
'06 Silverado SS...DD
'06 C1500 WT...DD
'07 Classic C1500 WT...DD
Built & sold cause can't keep 'em all:
'72 Blazer "The Bucket" http://67-72chevytrucks.com/vboard/s...d.php?t=433190
'55 Chevy straight axle gasser https://www.trifive.com/forums/showthread.php?t=173938
'69 Pro Street Chevelle http://www.chevelles.com/forums/showthread.php?t=332541
'86 M1031 CUCV http://67-72chevytrucks.com/vboard/s...d.php?t=553619
fun in dirt is offline  
Old 02-11-2013, 11:34 AM   #48
fun in dirt
Registered User
 
fun in dirt's Avatar
 
Join Date: Jan 2007
Location: Mississippi
Posts: 2,121
Re: "The Bucket" project diary

Took off work Friday to try & make some progress on disassembly. Front clip off & everything unhooked Friday. Engine, trans, & transfer out & all press washed off Saturday.
Attached Images
  
__________________
'72 C to K20 "Cannibalizer" http://67-72chevytrucks.com/vboard/s...32#post8653432
'85 K30 "Big Nassy"
'01 2500 Suburban ...party wagon & tow truck
'06 Silverado SS...DD
'06 C1500 WT...DD
'07 Classic C1500 WT...DD
Built & sold cause can't keep 'em all:
'72 Blazer "The Bucket" http://67-72chevytrucks.com/vboard/s...d.php?t=433190
'55 Chevy straight axle gasser https://www.trifive.com/forums/showthread.php?t=173938
'69 Pro Street Chevelle http://www.chevelles.com/forums/showthread.php?t=332541
'86 M1031 CUCV http://67-72chevytrucks.com/vboard/s...d.php?t=553619
fun in dirt is offline  
Old 02-11-2013, 10:04 PM   #49
Tom Vogel
2WD Jimmy
 
Tom Vogel's Avatar
 
Join Date: Mar 2005
Location: Davis County, Utah
Posts: 2,565
Re: "The Bucket" project diary

Darn! That was quick. It really is one slick Blazer. You are doing a beautiful job.
Posted via Mobile Device
Tom Vogel is offline  
Old 02-25-2013, 12:09 PM   #50
fun in dirt
Registered User
 
fun in dirt's Avatar
 
Join Date: Jan 2007
Location: Mississippi
Posts: 2,121
Re: "The Bucket" project diary

Some progress...Got the motor cleaned up & some new parts installed (oil pump & screen, timing chain set, waterpump, rear main seal & all new gaskets). Bought a used Edelbrock Performer intake for $60, that was just down the road. And sold the worn out 465/205 that came out...I love Craigslist!
Saturday it was actually sunny & 65, instead of raining, so got the motor painted & all put back together.
Next step will be the hydroboost brake system!
Attached Images
  
__________________
'72 C to K20 "Cannibalizer" http://67-72chevytrucks.com/vboard/s...32#post8653432
'85 K30 "Big Nassy"
'01 2500 Suburban ...party wagon & tow truck
'06 Silverado SS...DD
'06 C1500 WT...DD
'07 Classic C1500 WT...DD
Built & sold cause can't keep 'em all:
'72 Blazer "The Bucket" http://67-72chevytrucks.com/vboard/s...d.php?t=433190
'55 Chevy straight axle gasser https://www.trifive.com/forums/showthread.php?t=173938
'69 Pro Street Chevelle http://www.chevelles.com/forums/showthread.php?t=332541
'86 M1031 CUCV http://67-72chevytrucks.com/vboard/s...d.php?t=553619
fun in dirt is offline  
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:33 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com