01-11-2015, 03:44 PM | #5 |
Registered User
Join Date: Jan 2015
Location: Columbia, KY
Posts: 26
|
Re: 81 c30.....5.3
Now check the pink wire at the White color coil connector on each bank. Also check the pink wire on all of the injectors,
Then check the dark green/white wire in PCM Red connector Cavity 9 for the fuel pump relay signal. The PCM outputs a + signal on this wire. You should use a Digital Multi Meter when testing circuits on a fuel injection harness. You could damage the PCM if you are not careful. Bill |
Bookmarks |
|
|