NV 70 Blazer tub and frame parting out. - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Cohl · 02-26-2015, 06:16 PM

Quote:

Originally Posted by CrewCab59

2nd in line for the 90* small exhaust hanger.

Thanks

Any of this what you're looking for?

Cohl · 02-26-2015, 06:17 PM

Quote:

Originally Posted by Cohl

Any of this what you're looking for?

Pic

Cohl · 02-26-2015, 06:18 PM

Quote:

Originally Posted by Cohl

Pic

pic

jjzepplin · 02-26-2015, 06:41 PM

How is the right rear quarter panel?

**BIG ORANGE** · 02-26-2015, 06:51 PM

would you mind snapping a pic of the sunvisor mounting area, and where the windshield fits in on the outside top corner? Last how much for that corner of frame say 1 foot down and 20 inches across?
thanks Donnie

72k/5 · 02-26-2015, 07:36 PM

If D.passmore passes on the door I am interested in the latch reinforcement plates and the door alignment shims. Also is there a hatch avalible?

**71blksuper4x4** · 02-26-2015, 07:42 PM

I am interested in the bucket seat cross member in the raised seat bracket area in the front floor. Any way to cut that section out, and just ship the whole raise part with the cross member still attached? Trevor

**D.PASSMORE** · 02-26-2015, 08:12 PM

Thanks - Ill pass.

beardo73 · 02-26-2015, 10:04 PM

Quote:

Originally Posted by Cohl

Bed floor is really nice from what I can tell. Nicer than my driver actually!

Looking at a price for the whole thing! Would need it shipped to 16156.

Thanks!

1972 Jimmy · 02-27-2015, 07:39 AM

Quote:

Originally Posted by Cohl

Pic

Quote:

Originally Posted by Cohl

pic

Name: IMG_1675.jpg
Views: 225
Size: 46.6 KB

Yes these are the two exhaust brackets I'm looking for. Could I get a total cost shipped to 48623?
Thanks,
Eric

doo142 · 02-27-2015, 08:10 AM

I'm interested in Rear wheel tubs if not rusted or dented bad, lmk thanks!!

**BIG ORANGE** · 02-28-2015, 11:16 AM

ttt,,,

beardo73 · 02-28-2015, 03:39 PM

Any word on the price for the bed floor? Thanks!

jjzepplin · 02-28-2015, 08:58 PM

R R quarter panel?

CrewCab59 · 02-28-2015, 09:43 PM

The 2 exhaust brackets in your post #27 & #28 , if still for sale zip 37721

Thanks

1972 Jimmy · 03-01-2015, 01:33 AM

Quote:

Originally Posted by CrewCab59

The 2 exhaust brackets in your post #27 & #28 , if still for sale zip 37721

Thanks

CrewCab59,
I hope I'm not sounding rude but I'm still first inline for the brackets. I still have not heard back from the seller yet.
Sorry,
Eric

CrewCab59 · 03-01-2015, 06:39 PM

Quote:

Originally Posted by 1972 Jimmy

CrewCab59,
I hope I'm not sounding rude but I'm still first inline for the brackets. I still have not heard back from the seller yet.
Sorry,
Eric

Eric,

If you look @ my above post you'll see " if still for sale " . Nobody was jumping ahead of you.

Scott

**BIG ORANGE** · 03-03-2015, 09:55 AM

Hope cohl is alright, posted some good parts forsale and hasn't returned,
humm,,,,
Donnie

Guessta · 03-05-2015, 01:44 AM

How does the frame look, is it straight? If so, how much?
Thanks, Marco

doo142 · 03-05-2015, 08:13 AM

Quote:

Originally Posted by BIG ORANGE

Hope cohl is alright, posted some good parts forsale and hasn't returned,
humm,,,,
Donnie

I hope he's ok, It has been a while, anyone know?

walkintall54 · 03-06-2015, 12:36 AM

How much for the bed floor?

beardo73 · 03-19-2015, 04:16 PM

hmm.. Been a bit since we heard from Cohl! Still need a price on that bed floor!!

But more importantly.. hope cohl is okay and well...

**BIG ORANGE** · 03-19-2015, 05:23 PM

I checked his profile and he is coming on here but not replying to any of us

Andy69Blazer · 03-24-2015, 07:33 PM

Have you sold the Hatch or Hatch Glass?

seventyjimmy · 04-06-2015, 03:23 PM

im interested in the gas pedal assy if its available

02-26-2015, 06:41 PM	#29
jjzepplin Registered User Join Date: Feb 2012 Location: Ruskin Florida Posts: 4,549	Re: 70 Blazer tub and frame parting out. How is the right rear quarter panel? __________________ 70 swb 4x4 406sbc 700r4 203/205 d60/14blt locker yadda yadda http://67-72chevytrucks.com/vboard/s...88#post6935688 Yeller 72 Blazer 2wd conversion project "No Daggum Money" http://67-72chevytrucks.com/vboard/s...d.php?t=550804 LS1-T56 3.73 LSD super budget build Blanco-2014 Sierra SWB https://67-72chevytrucks.com/vboard/...d.php?t=810350

02-26-2015, 06:51 PM	#30
BIG ORANGE Senior Member Join Date: Oct 2001 Location: Lancaster S.C. Posts: 4,747	Re: 70 Blazer tub and frame parting out. would you mind snapping a pic of the sunvisor mounting area, and where the windshield fits in on the outside top corner? Last how much for that corner of frame say 1 foot down and 20 inches across? thanks Donnie __________________ Things happen for a reason!

02-26-2015, 07:36 PM	#31
72k/5 Registered User Join Date: Jan 2015 Location: Lone oak Texas Posts: 26	Re: 70 Blazer tub and frame parting out. If D.passmore passes on the door I am interested in the latch reinforcement plates and the door alignment shims. Also is there a hatch avalible?

02-26-2015, 07:42 PM	#32
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,151	Re: 70 Blazer tub and frame parting out. I am interested in the bucket seat cross member in the raised seat bracket area in the front floor. Any way to cut that section out, and just ship the whole raise part with the cross member still attached? Trevor __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

02-26-2015, 08:12 PM	#33
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,055	Re: 70 Blazer tub and frame parting out. Thanks - Ill pass.

02-27-2015, 08:10 AM	#36
doo142 Registered User Join Date: Jan 2013 Location: Bristol,In. Posts: 1,115	Re: 70 Blazer tub and frame parting out. I'm interested in Rear wheel tubs if not rusted or dented bad, lmk thanks!!

02-28-2015, 11:16 AM	#37
BIG ORANGE Senior Member Join Date: Oct 2001 Location: Lancaster S.C. Posts: 4,747	Re: 70 Blazer tub and frame parting out. ttt,,, __________________ Things happen for a reason!

02-28-2015, 03:39 PM	#38
beardo73 Registered User Join Date: Dec 2014 Location: Slippery Rock, PA Posts: 25	Re: 70 Blazer tub and frame parting out. Any word on the price for the bed floor? Thanks! __________________ 1972 K5 Blazer in progress!

02-28-2015, 08:58 PM	#39
jjzepplin Registered User Join Date: Feb 2012 Location: Ruskin Florida Posts: 4,549	Re: 70 Blazer tub and frame parting out. R R quarter panel? __________________ 70 swb 4x4 406sbc 700r4 203/205 d60/14blt locker yadda yadda http://67-72chevytrucks.com/vboard/s...88#post6935688 Yeller 72 Blazer 2wd conversion project "No Daggum Money" http://67-72chevytrucks.com/vboard/s...d.php?t=550804 LS1-T56 3.73 LSD super budget build Blanco-2014 Sierra SWB https://67-72chevytrucks.com/vboard/...d.php?t=810350

02-28-2015, 09:43 PM	#40
CrewCab59 Registered User Join Date: Jul 2010 Location: Knoxville,TN Posts: 1,185	Re: 70 Blazer tub and frame parting out. The 2 exhaust brackets in your post #27 & #28 , if still for sale zip 37721 Thanks __________________ 1972 Custom Deluxe 20 4x4 burb 1971 GMC SWB CST 4x4 1972 GMC k20 4x4 (X- brush truck ) 1971 Chevy CST Blazer 4x4 1971 Chevy C/10 1970 Cab Chassis C30 157" 1971 Cab Chassis Custom 30 Deluxe 157" 292/4spd ( Napco Replica ) 1988 Chevy V30 4x4 wrecker challenger 4812

03-03-2015, 09:55 AM	#43
BIG ORANGE Senior Member Join Date: Oct 2001 Location: Lancaster S.C. Posts: 4,747	Re: 70 Blazer tub and frame parting out. Hope cohl is alright, posted some good parts forsale and hasn't returned, humm,,,, Donnie __________________ Things happen for a reason!

03-05-2015, 01:44 AM	#44
Guessta Registered User Join Date: Feb 2015 Location: Phoenix, AZ Posts: 3	Re: 70 Blazer tub and frame parting out. How does the frame look, is it straight? If so, how much? Thanks, Marco

03-06-2015, 12:36 AM	#46
walkintall54 Registered User Join Date: May 2006 Location: riverside ca. Posts: 66	Re: 70 Blazer tub and frame parting out. How much for the bed floor?

03-19-2015, 04:16 PM	#47
beardo73 Registered User Join Date: Dec 2014 Location: Slippery Rock, PA Posts: 25	Re: 70 Blazer tub and frame parting out. hmm.. Been a bit since we heard from Cohl! Still need a price on that bed floor!! But more importantly.. hope cohl is okay and well... __________________ 1972 K5 Blazer in progress!

03-19-2015, 05:23 PM	#48
BIG ORANGE Senior Member Join Date: Oct 2001 Location: Lancaster S.C. Posts: 4,747	Re: 70 Blazer tub and frame parting out. I checked his profile and he is coming on here but not replying to any of us __________________ Things happen for a reason!



Register or Log In To remove these advertisements.

03-24-2015, 07:33 PM	#49
Andy69Blazer Registered User Join Date: Jan 2015 Location: Price, Utah Posts: 69	Re: 70 Blazer tub and frame parting out. Have you sold the Hatch or Hatch Glass?

04-06-2015, 03:23 PM	#50
seventyjimmy Registered User Join Date: Aug 2014 Location: Bucyrus Ohio Posts: 17	Re: 70 Blazer tub and frame parting out. im interested in the gas pedal assy if its available

Register or Log In To remove these advertisements.