brake pedal linkage? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1moretoy · 04-13-2015, 11:45 AM

Hey guys it's been a while since I tore the truck apart. I'm looking for some photos of the linkage under the dash on a manual brake setup. Anyway you could help me out. My truck had power brakes originally and now I'm converting to manual. I need to see what's needed and how to connect the pushrod to the master cylinder.

Thanks,

EARNHARDT#3 · 04-13-2015, 11:55 AM

It doesn't actually connect to it. It just pushes it. Looks like this....need one?

1moretoy · 04-13-2015, 12:04 PM

Quote:

Originally Posted by EARNHARDT#3

It doesn't actually connect to it. It just pushes it. Looks like this....need one?

I might need one. Do you know the length on that? Also how does it connect to the brake pedal. I forgot to mention I'm using a 1" wilwood manual master.

EARNHARDT#3 · 04-13-2015, 12:14 PM

Quote:

Originally Posted by 1moretoy

I might need one. Do you know the length on that? Also how does it connect to the brake pedal. I forgot to mention I'm using a 1" wilwood manual master.

It threads into the clevis the same as your power one did.

EARNHARDT#3 · 04-13-2015, 12:14 PM

I'll measure and let you know. I believe about 8"

1moretoy · 04-13-2015, 12:28 PM

Quote:

Originally Posted by EARNHARDT#3

I'll measure and let you know. I believe about 8"

Ok thank you. I no longer have the clevis.

EARNHARDT#3 · 04-13-2015, 01:13 PM

It's 7 1/2" long.

**michael bustamante** · 04-13-2015, 01:54 PM

i think i still have that rod and clevis. ill check tonight for you

1moretoy · 04-13-2015, 02:00 PM

Quote:

Originally Posted by michael bustamante

i think i still have that rod and clevis. ill check tonight for you

Thank you. That would be awesome.

04-13-2015, 11:45 AM	#1
1moretoy Registered User Join Date: Jul 2008 Location: san jose ca Posts: 467	brake pedal linkage? Hey guys it's been a while since I tore the truck apart. I'm looking for some photos of the linkage under the dash on a manual brake setup. Anyway you could help me out. My truck had power brakes originally and now I'm converting to manual. I need to see what's needed and how to connect the pushrod to the master cylinder. Thanks,

04-13-2015, 11:55 AM	#2
EARNHARDT#3 Registered User Join Date: May 2014 Location: PA Posts: 1,417	Re: brake pedal linkage? It doesn't actually connect to it. It just pushes it. Looks like this....need one? Attached Images __________________ 1967 C10, LWB, 250, Powerglide, PS, PB, 3/4 STATIC DROP

04-13-2015, 12:14 PM	#5
EARNHARDT#3 Registered User Join Date: May 2014 Location: PA Posts: 1,417	Re: brake pedal linkage? I'll measure and let you know. I believe about 8" __________________ 1967 C10, LWB, 250, Powerglide, PS, PB, 3/4 STATIC DROP

04-13-2015, 01:13 PM	#7
EARNHARDT#3 Registered User Join Date: May 2014 Location: PA Posts: 1,417	Re: brake pedal linkage? It's 7 1/2" long. __________________ 1967 C10, LWB, 250, Powerglide, PS, PB, 3/4 STATIC DROP

04-13-2015, 01:54 PM	#8
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,837	Re: brake pedal linkage? i think i still have that rod and clevis. ill check tonight for you __________________ 1967custom



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.