AR NOS Tail gate handle trim - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*Jens Jimmy* · 02-08-2017, 12:28 PM

NOS Tail gate trim that goes above the handle. Factory GM box is tired, however the trim is flawless and brilliant
47.00 will get this to your door in the lower 48 . I have several of these for those that are interested

**402Bowtie** · 02-08-2017, 12:50 PM

I'll take one

1971 GMC Jimmy 2wd · 02-08-2017, 01:19 PM

I'll take one

Black71Shorty · 02-08-2017, 02:15 PM

Mike, I'll take two.
Thanks
Coby

**71CHEVYSHORTBED402** · 02-08-2017, 02:36 PM

I'll take one if available. Please PM. Off topic, did you run out of door sills?

Thanks

*Jens Jimmy* · 02-08-2017, 05:34 PM

Ok, 402 bowtie, good for one, 1971GMC jimmy2wd, good for one, Black 71 shorty, good for two, &1shortbed402, I believe I have enough to get you one, but I want to be sure before you pay me. AND... Yes, I sold out of sill plates

Thanks guys

1971 GMC Jimmy 2wd · 02-08-2017, 05:49 PM

I sent you a pm earlier today

**Eagle9502** · 02-08-2017, 06:12 PM

I'll take one if you have enough.

*Jens Jimmy* · 02-08-2017, 07:40 PM

Eagle, I will count them when I get home and go down the list. I'm thinking we are going to make it to this point, but not 100% sure

*Jens Jimmy* · 02-09-2017, 12:44 AM

Ok Guys, Here is the order on the trim. I only have 5, so they will go in order of:
402Bowtie for 1
1971GMCJimmy2wd for 1
Black71shorty for 2
71shortbed 402 for 1

Eagle9502, you will be next in line, If any fall through, or I find another one.

Guys, send the payment to my email at jpdk9ringo@yahoo.com
Please Please Please put your forum screen name and what you are paying for in your pay pal to help me keep this straight.
If you are getting any other parts, just combine the total and list all of the parts that you are paying for

Thanks everyone for jumping in
Mike and Jen

**71CHEVYSHORTBED402** · 02-09-2017, 02:28 AM

Paid......Thank you

Black71Shorty · 02-09-2017, 03:59 AM

Payment sent. Thankyou Mike!

Coby

1971 GMC Jimmy 2wd · 02-09-2017, 11:03 AM

Paid

*Jens Jimmy* · 02-09-2017, 06:31 PM

Thanks Guys all of them paid by 11 this morning are on their way. will ship again tomorrow.

02-08-2017, 12:28 PM	#1
Jens Jimmy Account Suspended Join Date: Dec 2016 Location: Springdale, AR Posts: 834	NOS Tail gate handle trim NOS Tail gate trim that goes above the handle. Factory GM box is tired, however the trim is flawless and brilliant 47.00 will get this to your door in the lower 48 . I have several of these for those that are interested Attached Images

02-08-2017, 12:50 PM	#2
402Bowtie Registered User Join Date: Sep 2003 Location: Denver, CO Posts: 3,725	Re: NOS Tail gate handle trim I'll take one

02-08-2017, 01:19 PM	#3
1971 GMC Jimmy 2wd Registered User Join Date: Nov 2016 Location: Indianola Iowa Posts: 111	Re: NOS Tail gate handle trim I'll take one __________________

02-08-2017, 02:15 PM	#4
Black71Shorty Registered User Join Date: May 2009 Location: Ft. Worth, Texas...”Where the West begins” Posts: 424	Re: NOS Tail gate handle trim Mike, I'll take two. Thanks Coby

02-08-2017, 02:36 PM	#5
71CHEVYSHORTBED402 Senior Member Join Date: Feb 2009 Location: Northern Nevada Posts: 7,164	Re: NOS Tail gate handle trim I'll take one if available. Please PM. Off topic, did you run out of door sills? Thanks __________________ Tony 71 Custom Deluxe, SWB, 2WD, 402, A/C. I developed an assm. guide "kit" for restoring the truck from ground up. With assys, the guide accts for 1000s details, OEM identifications & part numbers, written in short order. 700+ images of assm., illust., charts, and points of interest. Much of the info. applies to all 67-72 GM trucks, and to a lessor degree all 67-72 GM vehicles. My build thread, and more on the guide https://67-72chevytrucks.com/vboard/...d.php?t=730025

02-08-2017, 05:34 PM	#6
Jens Jimmy Account Suspended Join Date: Dec 2016 Location: Springdale, AR Posts: 834	Re: NOS Tail gate handle trim Ok, 402 bowtie, good for one, 1971GMC jimmy2wd, good for one, Black 71 shorty, good for two, &1shortbed402, I believe I have enough to get you one, but I want to be sure before you pay me. AND... Yes, I sold out of sill plates Thanks guys

02-08-2017, 05:49 PM	#7
1971 GMC Jimmy 2wd Registered User Join Date: Nov 2016 Location: Indianola Iowa Posts: 111	Re: NOS Tail gate handle trim I sent you a pm earlier today __________________

02-08-2017, 06:12 PM	#8
Eagle9502 Senior Member Join Date: Dec 2015 Location: Brooklet, Georgia Posts: 832	Re: NOS Tail gate handle trim I'll take one if you have enough.

02-08-2017, 07:40 PM	#9
Jens Jimmy Account Suspended Join Date: Dec 2016 Location: Springdale, AR Posts: 834	Re: NOS Tail gate handle trim Eagle, I will count them when I get home and go down the list. I'm thinking we are going to make it to this point, but not 100% sure

02-09-2017, 12:44 AM	#10
Jens Jimmy Account Suspended Join Date: Dec 2016 Location: Springdale, AR Posts: 834	Re: NOS Tail gate handle trim Ok Guys, Here is the order on the trim. I only have 5, so they will go in order of: 402Bowtie for 1 1971GMCJimmy2wd for 1 Black71shorty for 2 71shortbed 402 for 1 Eagle9502, you will be next in line, If any fall through, or I find another one. Guys, send the payment to my email at jpdk9ringo@yahoo.com Please Please Please put your forum screen name and what you are paying for in your pay pal to help me keep this straight. If you are getting any other parts, just combine the total and list all of the parts that you are paying for Thanks everyone for jumping in Mike and Jen

02-09-2017, 02:28 AM	#11
71CHEVYSHORTBED402 Senior Member Join Date: Feb 2009 Location: Northern Nevada Posts: 7,164	Re: NOS Tail gate handle trim Paid......Thank you __________________ Tony 71 Custom Deluxe, SWB, 2WD, 402, A/C. I developed an assm. guide "kit" for restoring the truck from ground up. With assys, the guide accts for 1000s details, OEM identifications & part numbers, written in short order. 700+ images of assm., illust., charts, and points of interest. Much of the info. applies to all 67-72 GM trucks, and to a lessor degree all 67-72 GM vehicles. My build thread, and more on the guide https://67-72chevytrucks.com/vboard/...d.php?t=730025

02-09-2017, 03:59 AM	#12
Black71Shorty Registered User Join Date: May 2009 Location: Ft. Worth, Texas...”Where the West begins” Posts: 424	Re: NOS Tail gate handle trim Payment sent. Thankyou Mike! Coby

02-09-2017, 11:03 AM	#13
1971 GMC Jimmy 2wd Registered User Join Date: Nov 2016 Location: Indianola Iowa Posts: 111	Re: NOS Tail gate handle trim Paid __________________

02-09-2017, 06:31 PM	#14
Jens Jimmy Account Suspended Join Date: Dec 2016 Location: Springdale, AR Posts: 834	Re: NOS Tail gate handle trim Thanks Guys all of them paid by 11 this morning are on their way. will ship again tomorrow.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.