New 64 Stepper Project - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**The Rocknrod** · 01-25-2018, 10:08 AM

I took apart the steering box and cleaned the parts up. Man the casing took much work to get it down to bare metal. I watched a couple of videos on Saginaw power steering gear rebuilds and received a overhaul book for Christmas so I dove in. Painted the forging with Por15 and will top coat it Satin Black today. Wire wheeled the cover and end cover then clear coated them (aluminum). Figured out how I will put it all back together including the balls and did a test rebuild with the old parts. Will post pics when it warms up today.

01-25-2018, 10:08 AM	#11
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project I took apart the steering box and cleaned the parts up. Man the casing took much work to get it down to bare metal. I watched a couple of videos on Saginaw power steering gear rebuilds and received a overhaul book for Christmas so I dove in. Painted the forging with Por15 and will top coat it Satin Black today. Wire wheeled the cover and end cover then clear coated them (aluminum). Figured out how I will put it all back together including the balls and did a test rebuild with the old parts. Will post pics when it warms up today. __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.