Temperature sensor modification - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**A1971Blazer** · 09-25-2018, 11:33 AM

I still have several of these that are ready to ship....if anyone needs one
I can make more if necessary

**CUSTOM/10** · 02-03-2019, 10:38 AM

I will take one, if you have anymore? My pm box is currently full so I need to empty it or update my subscription, I’ll try and get that taken care of today.

Gary

**A1971Blazer** · 02-04-2019, 12:28 PM

Quote:

Originally Posted by CUSTOM/10

I will take one, if you have anymore? My pm box is currently full so I need to empty it or update my subscription, I’ll try and get that taken care of today.

Gary

I sold one yesterday but I still have a few more on hand....just PM me when you get ready....thanks

**CUSTOM/10** · 02-05-2019, 04:30 PM

Paypal has been sent !

Gary

**A1971Blazer** · 02-05-2019, 07:08 PM

Quote:

Originally Posted by CUSTOM/10

Paypal has been sent !

Gary

Got it my friend...will go out tomorrow...I hope it works for you...thanks...!

**CUSTOM/10** · 02-08-2019, 05:47 PM

Received it today, very professionally done !!!

Thanks, Gary

kens65fb · 04-24-2019, 02:36 PM

Quote:

Originally Posted by A1971Blazer

I sold one yesterday but I still have a few more on hand....just PM me when you get ready....thanks

I know Teflon tape is not recommended, what do you suggest for coating the threads of the sensor?

**A1971Blazer** · 04-24-2019, 02:56 PM

Quote:

Originally Posted by kens65fb

I know Teflon tape is not recommended, what do you suggest for coating the threads of the sensor?

You can use teflon tape but sometimes it won't allow it to ground very well..the sensor needs to ground to the head for it to read properly
I use a little dab of pipe sealing compound...

**truckster** · 01-30-2020, 07:21 PM

Quote:

Originally Posted by A1971Blazer

You can use teflon tape but sometimes it won't allow it to ground very well..the sensor needs to ground to the head for it to read properly
I use a little dab of pipe sealing compound...

I use Permatex Aviation Form-A-Gasket (#3). It stays flexible but provides a good seal. I also use it on paper and cork gaskets.

09-25-2018, 11:33 AM	#1
A1971Blazer Senior Member Join Date: Nov 2013 Location: East Tennessee Posts: 2,118	Re: Temperature sensor modification I still have several of these that are ready to ship....if anyone needs one I can make more if necessary __________________ 1967 C10 Step side 1968 C10 Step side 1970 Chevrolet K/5 Blazer 1972 Chevrolet K/5 Blazer .............

02-03-2019, 10:38 AM	#2
CUSTOM/10 Senior Member Join Date: May 2003 Location: Sandown, NH Posts: 2,797	Re: Temperature sensor modification I will take one, if you have anymore? My pm box is currently full so I need to empty it or update my subscription, I’ll try and get that taken care of today. Gary __________________ Gary 72 SWB 4x4 My 72 SWB Build http://67-72chevytrucks.com/vboard/s...d.php?t=259859 Last edited by CUSTOM/10; 02-03-2019 at 01:53 PM.

02-05-2019, 04:30 PM	#4
CUSTOM/10 Senior Member Join Date: May 2003 Location: Sandown, NH Posts: 2,797	Re: Temperature sensor modification Paypal has been sent ! Gary __________________ Gary 72 SWB 4x4 My 72 SWB Build http://67-72chevytrucks.com/vboard/s...d.php?t=259859

02-08-2019, 05:47 PM	#6
CUSTOM/10 Senior Member Join Date: May 2003 Location: Sandown, NH Posts: 2,797	Re: Temperature sensor modification Received it today, very professionally done !!! Thanks, Gary __________________ Gary 72 SWB 4x4 My 72 SWB Build http://67-72chevytrucks.com/vboard/s...d.php?t=259859



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.