03-24-2020, 09:13 PM | #1 |
Registered User
Join Date: Apr 2010
Location: Warrensburg, MO
Posts: 2,690
|
Orson the 49 GMC ~ Chris C.
This is a new project we’re working on. My son’s first. It’s a 49 GMC 100 longbed named Orson. it will be going on an 84 extended cab S10 chassis and be powered by a LM7 5.3/4L60E combo. It has 17” Torque Thrust IIs and huge meats in the rear. It will be getting an Astrovan 2nd row and full door panels.
Pretty solid truck to start with. The splashguards are in a box in the cab.
__________________
www.olesargecustoms.com email: chris@olesargecustoms.com '48 build: http://67-72chevytrucks.com/vboard/s...d.php?t=541904 '33 build: http://67-72chevytrucks.com/vboard/s...=1#post6232888 '49 build: http://67-72chevytrucks.com/vboard/s...=1#post6364475 |
03-24-2020, 09:17 PM | #2 |
Registered User
Join Date: Apr 2010
Location: Warrensburg, MO
Posts: 2,690
|
Re: Orson the 49 GMC ~ Chris C.
More pictures
__________________
www.olesargecustoms.com email: chris@olesargecustoms.com '48 build: http://67-72chevytrucks.com/vboard/s...d.php?t=541904 '33 build: http://67-72chevytrucks.com/vboard/s...=1#post6232888 '49 build: http://67-72chevytrucks.com/vboard/s...=1#post6364475 |
03-24-2020, 09:28 PM | #3 |
Registered User
Join Date: Apr 2010
Location: Warrensburg, MO
Posts: 2,690
|
Re: Orson the 49 GMC ~ Chris C.
This is the sunroof. Notice how it has flattened out the whole roofline.
Here’s how we intend to fix it. Another cab was sourced, we used a plas to remove the roof skin. And here is the patch panel.
__________________
www.olesargecustoms.com email: chris@olesargecustoms.com '48 build: http://67-72chevytrucks.com/vboard/s...d.php?t=541904 '33 build: http://67-72chevytrucks.com/vboard/s...=1#post6232888 '49 build: http://67-72chevytrucks.com/vboard/s...=1#post6364475 Last edited by skymangs; 03-25-2020 at 03:28 PM. |
03-24-2020, 09:37 PM | #4 |
Registered User
Join Date: Apr 2010
Location: Warrensburg, MO
Posts: 2,690
|
Re: Orson the 49 GMC ~ Chris C.
Here is the donor S10. An 84 extended cab with the venerable 2.8L Power train!
__________________
www.olesargecustoms.com email: chris@olesargecustoms.com '48 build: http://67-72chevytrucks.com/vboard/s...d.php?t=541904 '33 build: http://67-72chevytrucks.com/vboard/s...=1#post6232888 '49 build: http://67-72chevytrucks.com/vboard/s...=1#post6364475 |
03-24-2020, 09:42 PM | #5 |
Registered User
Join Date: Apr 2010
Location: Warrensburg, MO
Posts: 2,690
|
Re: Orson the 49 GMC ~ Chris C.
Then the S10 was stripped down to the chassis.
__________________
www.olesargecustoms.com email: chris@olesargecustoms.com '48 build: http://67-72chevytrucks.com/vboard/s...d.php?t=541904 '33 build: http://67-72chevytrucks.com/vboard/s...=1#post6232888 '49 build: http://67-72chevytrucks.com/vboard/s...=1#post6364475 |
03-24-2020, 09:55 PM | #6 |
Registered User
Join Date: Apr 2010
Location: Warrensburg, MO
Posts: 2,690
|
Re: Orson the 49 GMC ~ Chris C.
These are the wheels and tires we’ve picked for Orson. 17” Torque Thrust II's with 275/40R17 rear and 245/45R17 front. Pretty friggin' beefy!
__________________
www.olesargecustoms.com email: chris@olesargecustoms.com '48 build: http://67-72chevytrucks.com/vboard/s...d.php?t=541904 '33 build: http://67-72chevytrucks.com/vboard/s...=1#post6232888 '49 build: http://67-72chevytrucks.com/vboard/s...=1#post6364475 Last edited by skymangs; 03-25-2020 at 03:31 PM. |
03-24-2020, 10:02 PM | #7 |
Registered User
Join Date: Apr 2010
Location: Warrensburg, MO
Posts: 2,690
|
Re: Orson the 49 GMC ~ Chris C.
Next we cut the cab brackets off and welded on the new cab stands
__________________
www.olesargecustoms.com email: chris@olesargecustoms.com '48 build: http://67-72chevytrucks.com/vboard/s...d.php?t=541904 '33 build: http://67-72chevytrucks.com/vboard/s...=1#post6232888 '49 build: http://67-72chevytrucks.com/vboard/s...=1#post6364475 |
03-24-2020, 10:08 PM | #8 |
Registered User
Join Date: Apr 2010
Location: Warrensburg, MO
Posts: 2,690
|
Re: Orson the 49 GMC ~ Chris C.
Then we tackled the motor. Disassembling and cleaning everything!
__________________
www.olesargecustoms.com email: chris@olesargecustoms.com '48 build: http://67-72chevytrucks.com/vboard/s...d.php?t=541904 '33 build: http://67-72chevytrucks.com/vboard/s...=1#post6232888 '49 build: http://67-72chevytrucks.com/vboard/s...=1#post6364475 |
03-24-2020, 10:30 PM | #9 |
Registered User
Join Date: Apr 2010
Location: Warrensburg, MO
Posts: 2,690
|
Re: Orson the 49 GMC ~ Chris C.
Got the motor mostly painted today
__________________
www.olesargecustoms.com email: chris@olesargecustoms.com '48 build: http://67-72chevytrucks.com/vboard/s...d.php?t=541904 '33 build: http://67-72chevytrucks.com/vboard/s...=1#post6232888 '49 build: http://67-72chevytrucks.com/vboard/s...=1#post6364475 |
03-24-2020, 10:34 PM | #10 |
Registered User
Join Date: Apr 2010
Location: Warrensburg, MO
Posts: 2,690
|
Re: Orson the 49 GMC ~ Chris C.
And the last items stripped off the frame
__________________
www.olesargecustoms.com email: chris@olesargecustoms.com '48 build: http://67-72chevytrucks.com/vboard/s...d.php?t=541904 '33 build: http://67-72chevytrucks.com/vboard/s...=1#post6232888 '49 build: http://67-72chevytrucks.com/vboard/s...=1#post6364475 |
03-24-2020, 11:28 PM | #11 |
Senior Member
Join Date: Mar 2011
Location: West Plains, Missouri
Posts: 7,559
|
Re: Orson the 49 GMC ~ Chris C.
Hey Chris, I'll tag along...Jim
__________________
my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br /> |
03-25-2020, 12:53 PM | #12 |
Registered User
Join Date: Jul 2017
Location: Louisville, KY
Posts: 28
|
Re: Orson the 49 GMC ~ Chris C.
I Will be watching this thread as well,
I have a 1950 3600 and just acquired a 1996 S-15 ext Cab, my other 1991 S-10 frame was bent, so I had to get a new one. Are you planning on leaving it a long bed? I am curious as how you are going to address the bed. I have read that you can swap the leaf springs around gain the extra wheelbase, I have not seen it reported if this is correct.
__________________
1950 3600 with 1952 doors on S-10 frame Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=770608 |
03-25-2020, 01:04 PM | #13 |
Senior Member
Join Date: May 2007
Location: Doodah Kansas
Posts: 7,774
|
Re: Orson the 49 GMC ~ Chris C.
waytogoidaho!
I wish I could start with trucks that nice haha
__________________
the mass of men live lives of quiet desperation if there is a problem, I can have it. new project WAYNE http://67-72chevytrucks.com/vboard/s...d.php?t=844393 |
03-25-2020, 03:51 PM | #14 |
Registered User
Join Date: Apr 2010
Location: Warrensburg, MO
Posts: 2,690
|
Re: Orson the 49 GMC ~ Chris C.
Jim, thanks... We’re back, and I’ve got some serious catch up to do!
TravisC: yes, we’ll be leaving it a longbed. If you read my Rico F. Build http://67-72chevytrucks.com/vboard/s...d.php?t=651164 you’ll see what I do. Yes flipping the springs will gain you 1.25”. The second part is to remove 1.25” from the splashguards. Thanks Joedoh
__________________
www.olesargecustoms.com email: chris@olesargecustoms.com '48 build: http://67-72chevytrucks.com/vboard/s...d.php?t=541904 '33 build: http://67-72chevytrucks.com/vboard/s...=1#post6232888 '49 build: http://67-72chevytrucks.com/vboard/s...=1#post6364475 |
03-25-2020, 03:59 PM | #15 |
Post Whore
Join Date: May 2015
Location: Alabama
Posts: 14,662
|
Re: Orson the 49 GMC ~ Chris C.
looks like a solid truck...will be nice
__________________
Mongo...aka Greg RIP Dad RIP Jesse 1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598 Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334 Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563 2023 Chevy Z71..daily driver |
03-26-2020, 08:15 AM | #16 |
Senior Member
Join Date: Sep 2017
Location: Bryan, Texas
Posts: 2,346
|
Re: Orson the 49 GMC ~ Chris C.
I'm in. Nice start.
__________________
8man-aka Robert 1948 on a S10 Frame, small block with a carb 1954 Cab, 53 Front and Bed, 50 Doors, S10 Frame, Power TBD Build thread: "]http://67-72chevytrucks.com/vboard/showthread.php?t=746899&highlight=wife%27s+48[/URL] [/URL]http://67-72chevytrucks.com/vboard/showthread.php?t=840204 |
03-26-2020, 09:20 AM | #17 |
Registered User
Join Date: Apr 2010
Location: Warrensburg, MO
Posts: 2,690
|
Re: Orson the 49 GMC ~ Chris C.
my son is building this one, I’m just the creative genius! Send any compliments his way!
__________________
www.olesargecustoms.com email: chris@olesargecustoms.com '48 build: http://67-72chevytrucks.com/vboard/s...d.php?t=541904 '33 build: http://67-72chevytrucks.com/vboard/s...=1#post6232888 '49 build: http://67-72chevytrucks.com/vboard/s...=1#post6364475 |
03-27-2020, 09:46 AM | #18 |
Registered User
Join Date: Apr 2010
Location: Warrensburg, MO
Posts: 2,690
|
Re: Orson the 49 GMC ~ Chris C.
This is the bare frame ready for new ball joints and drop spindles
__________________
www.olesargecustoms.com email: chris@olesargecustoms.com '48 build: http://67-72chevytrucks.com/vboard/s...d.php?t=541904 '33 build: http://67-72chevytrucks.com/vboard/s...=1#post6232888 '49 build: http://67-72chevytrucks.com/vboard/s...=1#post6364475 |
03-27-2020, 10:02 AM | #19 |
Registered User
Join Date: Apr 2010
Location: Warrensburg, MO
Posts: 2,690
|
Re: Orson the 49 GMC ~ Chris C.
Here’s the engine all churched up. And the header’s we chose for this build.
__________________
www.olesargecustoms.com email: chris@olesargecustoms.com '48 build: http://67-72chevytrucks.com/vboard/s...d.php?t=541904 '33 build: http://67-72chevytrucks.com/vboard/s...=1#post6232888 '49 build: http://67-72chevytrucks.com/vboard/s...=1#post6364475 |
03-27-2020, 11:26 PM | #20 |
Registered User
Join Date: Nov 2014
Location: Chino Valley, AZ
Posts: 50
|
Re: Orson the 49 GMC ~ Chris C.
Nice starter truck . . . . . too bad for the 'moon roof' .
Great start , Chris . . . . . so, what do we call 'the Son ' ; he's doing good. I'm looking - in , thanks guys from Chino Valley, Arizona ……….. jim |
03-28-2020, 09:23 AM | #21 |
Registered User
Join Date: Apr 2010
Location: Warrensburg, MO
Posts: 2,690
|
Re: Orson the 49 GMC ~ Chris C.
Dunno he’s only a PFC. My other son Michael also works for me now. I’m thinking of changing the name (at least unofficially) to Ole Sarge and Sons Customs!
__________________
www.olesargecustoms.com email: chris@olesargecustoms.com '48 build: http://67-72chevytrucks.com/vboard/s...d.php?t=541904 '33 build: http://67-72chevytrucks.com/vboard/s...=1#post6232888 '49 build: http://67-72chevytrucks.com/vboard/s...=1#post6364475 |
03-28-2020, 02:48 PM | #22 |
Registered User
Join Date: Nov 2014
Location: Chino Valley, AZ
Posts: 50
|
Re: Orson the 49 GMC ~ Chris C.
|
03-28-2020, 05:18 PM | #23 |
Senior Member
Join Date: May 2007
Location: Doodah Kansas
Posts: 7,774
|
Re: Orson the 49 GMC ~ Chris C.
looking good, sarges son
__________________
the mass of men live lives of quiet desperation if there is a problem, I can have it. new project WAYNE http://67-72chevytrucks.com/vboard/s...d.php?t=844393 |
03-31-2020, 10:22 PM | #24 |
Registered User
Join Date: Apr 2010
Location: Warrensburg, MO
Posts: 2,690
|
Re: Orson the 49 GMC ~ Chris C.
The ground was finally dry enough to pull Orson in the shop
__________________
www.olesargecustoms.com email: chris@olesargecustoms.com '48 build: http://67-72chevytrucks.com/vboard/s...d.php?t=541904 '33 build: http://67-72chevytrucks.com/vboard/s...=1#post6232888 '49 build: http://67-72chevytrucks.com/vboard/s...=1#post6364475 |
03-31-2020, 10:27 PM | #25 |
Registered User
Join Date: Apr 2010
Location: Warrensburg, MO
Posts: 2,690
|
Re: Orson the 49 GMC ~ Chris C.
They started by getting the front end blown apart. They’ll move on to the cab tomorrow.
__________________
www.olesargecustoms.com email: chris@olesargecustoms.com '48 build: http://67-72chevytrucks.com/vboard/s...d.php?t=541904 '33 build: http://67-72chevytrucks.com/vboard/s...=1#post6232888 '49 build: http://67-72chevytrucks.com/vboard/s...=1#post6364475 |
Bookmarks |
|
|