|
07-07-2004, 08:38 PM
|
#1 |
|
The Sauz
Join Date: Mar 2002
Location: Chilliwack BC, Canada
Posts: 149
|
Loose Axle?
Just pulled the rear wheels off my old mans 69 and when i pulled the drums off i heard a weird clunk. I grabbed the axle plate and i can push it back and forth about half an inch. Ay ideas what might have let go in the rear end?
__________________
68 lwb 2wd (spread between 3 garages) 72 Burb - Flat Deck 92 Yukon 3" lift - 33's - the new bush pig 01 Sierra - Daily Driver (for now) |
|
|
|
07-07-2004, 09:48 PM
|
#2 |
|
Fabricate till you "puke"
Join Date: Jun 2002
Location: Ill
Posts: 9,403
|
Well, if its a 1/2 ton truck the c clip axles do have some end play.....1/2" would be excessive tho... you might look for worn c clips, center pin , & check the clip groove on the axle for wear. they will have approx 1/8" end play. Good luck,crazyL
 one more thought....side bearings on the carrier...
__________________
69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears.... |
|
|
|
|
07-07-2004, 11:03 PM
|
#3 |
|
Registered User
 
Join Date: May 2002
Location: North Carolina
Posts: 1,234
|
Don't think there's anything wrong with it.
__________________
Stepsides look like real trucks! Smitty 
|
|
|
|
|
07-08-2004, 12:16 AM
|
#4 | |
|
The Sauz
Join Date: Mar 2002
Location: Chilliwack BC, Canada
Posts: 149
|
Quote:
__________________
68 lwb 2wd (spread between 3 garages) 72 Burb - Flat Deck 92 Yukon 3" lift - 33's - the new bush pig 01 Sierra - Daily Driver (for now) |
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
