Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
|
01-29-2021, 12:22 PM | #1 |
Senior Member
Join Date: Sep 2015
Location: Martensville, Saskatchewan
Posts: 956
|
Re: My 1970 GMC Project
Thanks for the compliments! Too bad its quite the journey to get there
|
02-15-2021, 12:44 AM | #2 |
Senior Member
Join Date: Sep 2015
Location: Martensville, Saskatchewan
Posts: 956
|
Re: My 1970 GMC Project
No progress on the truck to report but I have been cleaning my shop. I got myself a bolt bin which will be nice. Now I won't have to spend half my evenings looking for bolts and such. I also got a bunch of stuff off the floor by building a recycling/garbage center. That should greatly improve cleanup time in the future. I also found myself a computer monitor that I have hooked up as a small TV in there now. I am still doing a major deep clean at the moment so probably won't have any progress for another week or so but it sure feels good to have a clean shop.
|
02-21-2021, 09:53 PM | #3 |
Senior Member
Join Date: Dec 2009
Location: TN.
Posts: 7,817
|
Re: My 1970 GMC Project
Sometimes a break is the best thing
Flip for Ya. .
__________________
________________________________________________________________________________________ ____________________________________________ 84 Chevy K-20 63 Impala (my high school car) http://67-72chevytrucks.com/vboard/s...Crew Cab Build |
02-21-2021, 10:32 PM | #4 |
Senior Member
Join Date: Sep 2015
Location: Martensville, Saskatchewan
Posts: 956
|
Re: My 1970 GMC Project
Hey right on man! I wasn't aware that they can be flipped. No clue how though. I have my bolt bin all filled up now. Just about done with the deep clean. Just the toolbox left to sort out now.
|
02-24-2021, 11:37 PM | #5 |
Senior Member
Join Date: Sep 2015
Location: Martensville, Saskatchewan
Posts: 956
|
Re: My 1970 GMC Project
Update on passenger side rocker. I ground down all my plug welds and the difficult to grind seam at the back edge tonight. I also started to weld the door seam the rest of the way. Couple more evenings on this side and I should be able to jump over and start the driver side rust repair.
|
03-03-2021, 12:58 AM | #6 |
Senior Member
Join Date: Sep 2015
Location: Martensville, Saskatchewan
Posts: 956
|
Re: My 1970 GMC Project
Passenger side door jamb is complete. Just a small amount of grinding/welding to do on the bottom of the rocker and this side is completed!
|
Bookmarks |
|
|