anybody got pics of modern seats in these trucks?

[exfordman]

Originally Posted by 88Jimmy4x4

you cant really get it flat, close but due to frame rail you cant completely

modern seat install

those are absolutely perfect exactly what im looking for! what are they out of? are there cupholders in that center flipdown console?

and with those when this happens

\/\/\/\/\/\/\/\/\/

Originally Posted by Rich84

When you marry her she will slide over anyway.

ill just keep the center part flipped down.

[88Jimmy4x4]

Originally Posted by exfordman

those are absolutely perfect exactly what im looking for! what are they out of? are there cupholders in that center flipdown console?

and with those when this happens

\/\/\/\/\/\/\/\/\/


ill just keep the center part flipped down.

Those are out of a 2000-2007 chevy truck, seat belts built into the seats. No cupholder on the cloth LS version on this one, but check around because I think some years did have them.

[S10Fan]

Originally Posted by 88Jimmy4x4

heres mine, got them from summit racing with brackets and use factory holes except for one each had to drill a hole. They recline and slide.

Very nice looking seats!

[rs72z]

08 f150

[SS From the "Wood"]

Originally Posted by 1981Sturgis

2005 Cadillac CTS Heated Leather.

Being a former CTS-V owner, I'm quite partial to this setup! Loved the way the side bolsters held me in place while going hard through the twisties! My only concern would be matching the rear, as I've got a CC truck...

[king-918]

I have to get a foldable bench 40/20/40 because I need room for the kids and an armrest
Posted via Mobile Device

[Devillusion]

Originally Posted by cal30_sniper

I put '96 Suburban seats into my '86. As long as you can score the factory bucket seat rails for your truck, they are "almost" a bolt in job.




Instructions on how I did it here:
http://67-72chevytrucks.com/vboard/s...d.php?t=529095

-cal30sniper

any details on the install and the rear seat setup you are running?

[cal30_sniper]

Originally Posted by Devillusion

any details on the install and the rear seat setup you are running?

It's all in the link that I posted. I'm running the '96 seats front and rear.
Posted via Mobile Device

[StrokinRat]

Here's mine out of a 03 chevy. size=1Posted via Mobile Device[/i][/size]
Posted via Mobile Device
Posted via Mobile Device

[Brad18xx]

Originally Posted by 88Jimmy4x4

you cant really get it flat, close but due to frame rail you cant completely

modern seat install

Do you have anymore pics on the process of installing the seats and cutting the floor and making the carpet fit the cut floor? Do you have a build thread?

[lsxponcho]

Here's my turd with some pontiac aztec seats...

[wraprail]

1997 Cadillac Eldorado Leather, Heated, 4 way power lumbar ect.

[carboncrew]

I've posted these around before but this is what I used:

[Brad18xx]

Originally Posted by carboncrew

I've posted these around before but this is what I used:

what are these seats from? anymore pics of instalation or brackits? also doese the console have a cubholder and is there leg room?

[jaycee2007]

Installed these out of some special trail edition 94 Jeep Cherokee then SEM dyed them black but kept the original red line. Used Blazer console.



Posted via Mobile Device
Posted via Mobile Device

[carboncrew]

Mine are out of a 2012 honda odyssey. Plenty of legroom and yes they have a cup holder. I could've/would've mounted mine an inch lower but my wife will drive it sometimes (maybe) and she's little

[74 stepside]

Just scored these buckets out of a 91 suburban at the junk yard for $15 each. Nice gray cloth and I believe they will fit without a problem since the suburban has the hump in the floor, same as a truck.

[JGood]

Originally Posted by exfordman

those are absolutely perfect exactly what im looking for! what are they out of? are there cupholders in that center flipdown console?

and with those when this happens

\/\/\/\/\/\/\/\/\/


ill just keep the center part flipped down.

they are from 99-06 style chevy or gm and most seats that ive seen from those style chevys had the cupholders at the front base of the seat in the center so ur drink wasnt up in the arm rest

[Low87]

Originally Posted by JGood

they are from 99-06 style chevy or gm and most seats that ive seen from those style chevys had the cupholders at the front base of the seat in the center so ur drink wasnt up in the arm rest

I've got a 40/20/40 set in the garage awaiting install into the K5. Out of an '01 Silverado. Console has cup holders.

[Ford Assassin]

Originally Posted by carboncrew

I've posted these around before but this is what I used:

Digging up an old thread, but those look great.

Was looking to do 91-96 Caprice seats, but those look great too.

[Palf70Step]

First picture is my old 83 with a 92 C1500 bench seat. Very Nice swap and very comfortable. The thin design of the seat does not take away any leg room

2nd picture is my current truck. Has aftermarket seat setup

[Loco83]

Originally Posted by 88Jimmy4x4

heres mine, got them from summit racing with brackets and use factory holes except for one each had to drill a hole. They recline and slide.

Have these exact same seats and wish I had kept the bench,first they sit too high, even with the lowest setting on the mounts, have to bring the seat fwd to have good touch on the pedals and second they are as hard as a rock.

[cfan10]

Originally Posted by 76stepside01

Not finished yet but you get the idea.

Nice setup, been wanting to get rid of the gas tank humps for years...possibilities are endless once those are gone.