|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
03-15-2021, 06:06 PM
|
#1 |
|
Registered User
Join Date: Sep 2013
Location: North Tonawanda, NY
Posts: 236
|
Power Steering Pump Assembly Question
All - in the photos below, do I have the correct fitting orientation against the spring or is it the other way? I want to make sure before re-assembly. Thanks for your help in advance!
Where can get the seals for the 2 studs with the hex heads and the black seal for the large nut? |
|
|
|
03-15-2021, 06:22 PM
|
#2 |
|
Registered User
 Join Date: Oct 2005
Location: Overland Park, Ks.
Posts: 5,202
|
Re: Power Steering Pump Assembly Question
You can get a seal kit from any parts store. It has the o-rings & the shaft seal.
Its been so long I can't remember where the spring goes but I'm thinking its between those parts. George |
|
|
|
|
03-15-2021, 06:39 PM
|
#3 |
|
Registered User
Join Date: Sep 2013
Location: North Tonawanda, NY
Posts: 236
|
Re: Power Steering Pump Assembly Question
When I originally took off the nut the fitting came flying out so the spring was first installed - but I'm not sure what is correct. Thanks for your input
|
|
|
|
|
03-15-2021, 07:02 PM
|
#4 |
|
Senior Member
 Join Date: Aug 2019
Location: Cheraw
Posts: 1,305
|
Re: Power Steering Pump Assembly Question
Flow control spring goes in first, then the flow control valve.
|
|
|
|
|
03-15-2021, 08:58 PM
|
#5 |
|
Registered User
Join Date: Sep 2013
Location: North Tonawanda, NY
Posts: 236
|
Re: Power Steering Pump Assembly Question
Bigbird - OK is the valve oriented correctly? Thanks for your help!
|
|
|
|
|
03-15-2021, 09:04 PM
|
#6 |
|
Senior Member
Join Date: Aug 2019
Location: Cheraw
Posts: 1,305
|
Re: Power Steering Pump Assembly Question
Yes it goes in just like you have it.
|
|
|
|
|
03-17-2021, 01:27 PM
|
#7 |
|
Registered User
Join Date: Sep 2013
Location: North Tonawanda, NY
Posts: 236
|
Re: Power Steering Pump Assembly Question
Thanks BB
|
|
|
|
|
| Bookmarks |
|
|
Linear Mode
