Power Steering Hose OEM

[The Rocknrod]

Thats an easy one, Edelman makes that. Try #71236.

[Brim]

Originally Posted by The Rocknrod

Thats an easy one, Edelman makes that. Try #71236.

Appreciate your help sir. That part number is for the return line. I drove to several NAPA's today and found some close but at the steering box end the flare nuts were always one size too big. Mine are 5/8 by 11/16 so I am thinking the ones we were pulling were 13/16.

Anyway I might just have to find a additional reducer flare nut to tie everything in. I ordered this one but it will have to be shipped so I will have til wait until Thursday of this week to see if it works, seems no other stores around me had one in stock.
https://www.napaonline.com/en/p/NPS7...&gclsrc=aw.ds&

My Truck is my only mode of transportation and the wife works so I might need to wait until her next day off to use her car to run around town. But if the hose comes in and it don't work I will just have one made locally. Looks like I'm on the bus until then.

-Mark

[The Rocknrod]

Originally Posted by Brim

Appreciate your help sir. That part number is for the return line. I drove to several NAPA's today and found some close but at the steering box end the flare nuts were always one size too big. Mine are 5/8 by 11/16 so I am thinking the ones we were pulling were 13/16.

...

Thanks for letting me know that I didnt have that on my parts list. It's Edelman 70917 is what I used.
The one you show uses o-rings, the one I list here is inverted flare. Sorry for the confusion.

[Brim]

Originally Posted by The Rocknrod

Thanks for letting me know that I didnt have that on my parts list. It's Edelman 70917 is what I used.
The one you show uses o-rings, the one I list here is inverted flare. Sorry for the confusion.

No thank you for all your help sir. I will get it figured out.

-Mark