1967 buick special wagon

[gottattooz]

I pulled the pontiac away from the lift and put the wagon up to remove the rear bumper and rear body mount bolts. Then I made a rail bracket out of one inch square tubing to lift the body off once I cut the floor out

Josh

[gottattooz]

I cut the floor out of the wagon and raised it off the chassis

Josh

[gottattooz]

I cleaned up the rocker panels on the wagon and painted the inside black (no picture). I bought some 11gauge steel to box in the rockers on the pontiac. The outer rocker panels of the wagon will attach to the same panel

Josh

[gottattooz]

I measured and trimmed the new rocker panel and drilled what feels like a thousand holes. I painted the inside with epoxy paint and plug welded it to the car.

Josh