transmission cooler lines/connections Q's

[Hart_Rod]

Originally Posted by A1971Blazer

My swap came from an '02 TransAm,
I used the factory steel lines up to the front of the oil pan and brazed on -6 AN fittings.....
from there to the radiator with teflon braided hose, from the radiator to an auxiliary cooler and back with 3/8" aluminum lines.

the line to the cooler comes out at the top of the radiator, the return comes out at the bottom and back to the transmission
Attachment 2271987

painted all the lines black to help them disappear
Attachment 2271988
Attachment 2271989

What fittings did you use in the radiator to attach the AN lines? TIA

[A1971Blazer]

Originally Posted by Hart_Rod

What fittings did you use in the radiator to attach the AN lines? TIA

-6 AN to 1/2"-20 inverted flare per the fittings in my Entropy
just make sure that's what yours has.
finished all my plumbing and tightened it all down....fired it up Saturday...no leaks anywhere..