60-66 to 73-87 Transfer... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

GMC-V6 · 09-17-2023, 11:06 AM

I have 62 GMC dually... ideally I'd like to transfer its power train and body over to a 73+ frame.. Cab n chassis to Cab n chassis.

Parts of like to transfer:
Cab.
Front clip.
Engine.
Transmission.
Rear end.

If possible to swap over I'd be looking for a 2wd with a 60 inch cab to axle.
Mike

**LostMy65** · 09-17-2023, 01:55 PM

Quote:

Originally Posted by GMC-V6

I have 62 GMC dually... ideally I'd like to transfer its power train and body over to a 73+ frame.. Cab n chassis to Cab n chassis.

Parts of like to transfer:
Cab.
Front clip.
Engine.
Transmission.
Rear end.

If possible to swap over I'd be looking for a 2wd with a 60 inch cab to axle.
Mike

There's a couple threads, and a rather thorough one where it's discouraged.
One is a VIN matter, but depending your State you live in, it may not matter.
The other reason is the shape of the 73+ frames. I guess they bump up under the cab so it makes the whole truck sit higher on the frame. Probably look fine for a 4x4.
.
It's been said that the 73+ suburbans don't have this bump up and our trucks could potentially sit correctly, but I don't know if anyone has ever confirmed.
.
The most well known thread on this topic might be linked in the FAQ's.

**LostMy65** · 09-17-2023, 11:41 PM

Here's the thread. It was in the FAQ's
http://www.67-72chevytrucks.com/vboa...d.php?t=481023

**raidmagic** · 09-18-2023, 11:40 AM

Is your frame bad? Why do you want to switch them?

**cwcarpenter98** · 09-18-2023, 10:45 PM

If your original frame isn't bad, your best course of action is to put the front suspension and rear axle from the squarebody on your 62 frame

karlbenz · 09-20-2023, 04:49 PM

On a square body truck frame you will end up with a 3" body lift unless you do some serious modifications

GMC-V6 · 09-22-2023, 05:24 AM

I was going to do the front end swap but looking closer my 62 frame is all beat up and starting to have soft spots... So I'd being saving a dying frame.. So I was trying to find out what I'd need to get for a frame to slide under the truck.

I don't want a square body powertrain I want the 62s powertrain fan blade to rear end.
So figured if the front swaps why not the frames😂

Apparently that's not easily done shame they don't make much for dually parts.
So I need a 60 inch cab to axle cab n chassis frame I can put the GMC V6/4spd/Diff into.

Mike

**LostMy65** · 09-22-2023, 08:15 PM

You could try to find another 60-62 frame, a 63-66 would work but the bed mounts won't line up and the frame horns where the bumper mounts will be different. Then 67-72 with the same mods needed with the 63-66 frame.

GMC-V6 · 09-26-2023, 07:19 PM

I need a dual rear wheel cab n chassis frame that is 60" cab to axle.
Mike

09-17-2023, 11:06 AM	#1
GMC-V6 Registered User Join Date: Jul 2021 Location: Mazomanie Posts: 16	60-66 to 73-87 Transfer... I have 62 GMC dually... ideally I'd like to transfer its power train and body over to a 73+ frame.. Cab n chassis to Cab n chassis. Parts of like to transfer: Cab. Front clip. Engine. Transmission. Rear end. If possible to swap over I'd be looking for a 2wd with a 60 inch cab to axle. Mike

09-17-2023, 11:41 PM	#3
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,507	Re: 60-66 to 73-87 Transfer... Here's the thread. It was in the FAQ's http://www.67-72chevytrucks.com/vboa...d.php?t=481023 __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035

09-18-2023, 11:40 AM	#4
raidmagic Senior Member Join Date: Jan 2015 Location: Tampa, Fl. Posts: 421	Re: 60-66 to 73-87 Transfer... Is your frame bad? Why do you want to switch them? __________________ 1965 C-10 1/2 ton shortbed part time daily driver 1980 C-10 1/2 ton shortbed project

09-18-2023, 10:45 PM	#5
cwcarpenter98 Senior Member Join Date: Jan 2018 Location: Hickory Flat, GA Posts: 4,432	Re: 60-66 to 73-87 Transfer... If your original frame isn't bad, your best course of action is to put the front suspension and rear axle from the squarebody on your 62 frame __________________ Christian Carpenter 1963 C10 - Frankentruck 283, Muncie 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 --> Soon to be 350, Saginaw 4 speed 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson

09-20-2023, 04:49 PM	#6
karlbenz Registered User Join Date: Nov 2008 Location: kannapolis, nc Posts: 511	Re: 60-66 to 73-87 Transfer... On a square body truck frame you will end up with a 3" body lift unless you do some serious modifications __________________ 2000 c3500 utility bed 7.4l 5sp manual old body style. Cab and chassis 1964 GMC K10 383cu in/sm465/twin stick np205 1965 Chevy C60

09-22-2023, 05:24 AM	#7
GMC-V6 Registered User Join Date: Jul 2021 Location: Mazomanie Posts: 16	Re: 60-66 to 73-87 Transfer... I was going to do the front end swap but looking closer my 62 frame is all beat up and starting to have soft spots... So I'd being saving a dying frame.. So I was trying to find out what I'd need to get for a frame to slide under the truck. I don't want a square body powertrain I want the 62s powertrain fan blade to rear end. So figured if the front swaps why not the frames😂 Apparently that's not easily done shame they don't make much for dually parts. So I need a 60 inch cab to axle cab n chassis frame I can put the GMC V6/4spd/Diff into. Mike

09-22-2023, 08:15 PM	#8
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,507	Re: 60-66 to 73-87 Transfer... You could try to find another 60-62 frame, a 63-66 would work but the bed mounts won't line up and the frame horns where the bumper mounts will be different. Then 67-72 with the same mods needed with the 63-66 frame. __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035

09-26-2023, 07:19 PM	#9
GMC-V6 Registered User Join Date: Jul 2021 Location: Mazomanie Posts: 16	Re: 60-66 to 73-87 Transfer... I need a dual rear wheel cab n chassis frame that is 60" cab to axle. Mike



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.