64 C10 Radiator Core Support Question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**MikeN** · 10-17-2023, 10:07 AM

The core support in my 64 already had a not-so-great repair on it when I got the truck in 1996, apparently from some minor crash damage. The welds have finally given up on the repair, and I need to replace the entire core support. Is the quality of the reproduction core supports acceptable? I'm not a body man, so if the reproductions need a lot of massaging, that may not work for me.

joesscamaro · 10-17-2023, 02:19 PM

I'm running one on my truck and will say that it fit pretty nice. I had to elongate a couple of holes to allow for panel alignment but don't have any real complaints. I ordered mine from LMC.

**MikeN** · 10-17-2023, 04:34 PM

Thank you sir!

**cwcarpenter98** · 10-17-2023, 10:26 PM

I drove up to Auto Metal Direct in Gainesville, GA, to pick mine up a couple years ago. Fit nicely with all my other original sheet metal. I would buy a new one again if I was repairing crash damage or replacing a super rusty original

Justin71105 · 10-18-2023, 12:17 PM

Also have the Auto Metal Direct core support, fit fine no real issues.

**MikeN** · 10-19-2023, 10:36 AM

Thanks guys. Summit Racing has them in stock, manufactured by Goodmark, and it has 5 star reviews on their site. They deliver for free - i might go that route.

10-17-2023, 10:07 AM	#1
MikeN Senior Member Join Date: Oct 2007 Location: Marietta, GA Posts: 779	64 C10 Radiator Core Support Question The core support in my 64 already had a not-so-great repair on it when I got the truck in 1996, apparently from some minor crash damage. The welds have finally given up on the repair, and I need to replace the entire core support. Is the quality of the reproduction core supports acceptable? I'm not a body man, so if the reproductions need a lot of massaging, that may not work for me.

10-17-2023, 02:19 PM	#2
joesscamaro Registered User Join Date: Sep 2008 Location: Newport, North Carolina Posts: 618	Re: 64 C10 Radiator Core Support Question I'm running one on my truck and will say that it fit pretty nice. I had to elongate a couple of holes to allow for panel alignment but don't have any real complaints. I ordered mine from LMC.

10-17-2023, 04:34 PM	#3
MikeN Senior Member Join Date: Oct 2007 Location: Marietta, GA Posts: 779	Re: 64 C10 Radiator Core Support Question Thank you sir!

10-17-2023, 10:26 PM	#4
cwcarpenter98 Senior Member Join Date: Jan 2018 Location: Hickory Flat, GA Posts: 4,431	Re: 64 C10 Radiator Core Support Question I drove up to Auto Metal Direct in Gainesville, GA, to pick mine up a couple years ago. Fit nicely with all my other original sheet metal. I would buy a new one again if I was repairing crash damage or replacing a super rusty original __________________ Christian Carpenter 1963 C10 - Frankentruck 283, Muncie 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 --> Soon to be 350, Saginaw 4 speed 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson

10-18-2023, 12:17 PM	#5
Justin71105 Registered User Join Date: Dec 2019 Location: Greer Sc Posts: 222	Re: 64 C10 Radiator Core Support Question Also have the Auto Metal Direct core support, fit fine no real issues. __________________ 1964 C10 Resto-mod 5.3L - L59

10-19-2023, 10:36 AM	#6
MikeN Senior Member Join Date: Oct 2007 Location: Marietta, GA Posts: 779	Re: 64 C10 Radiator Core Support Question Thanks guys. Summit Racing has them in stock, manufactured by Goodmark, and it has 5 star reviews on their site. They deliver for free - i might go that route.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.