OR 1972 C10 Parting - Page 11 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

DLTruck1973 · 11-06-2015, 06:04 PM

Quote:

Originally Posted by covingtontn

Hi Thomas

The price of $50 sounds fair to me. My zip code is 38019.
Send a total cost.
Also do you accept paypal
Thanks
John

John,

PM sent with shipping charge and payment information.

Thank you very much,
Thomas

**72 Cheyenne K20** · 11-09-2015, 10:39 PM

Hi Thomas, PM me your payment info and I'll get you paid.

Thanks, Scott

Quote:

Originally Posted by DLTruck1973

Hi Scott,

For a nice under dash harness, I get $65.00. No cuts or splices. For the cig lighter and radio harness, $7.50 each for those plus the shipping for everything which would be $17.00.

$97.00 total if interested.

Let me know and thank you for the interest,

Thomas

DLTruck1973 · 11-10-2015, 12:03 PM

Quote:

Originally Posted by 72 Cheyenne K20

Hi Thomas, PM me your payment info and I'll get you paid.

Thanks, Scott

PM on the way.

Thank you,
Thomas

jlampka · 11-10-2015, 01:32 PM

Photo 5 - need center grill brace only with all the clips and screws - do not need the hood latch as I already have one. shipped to 14120. Thanks.

Jeff in North Tonawanda, NY

w4625 · 11-10-2015, 08:13 PM

Thomas I will pass on the parking light lens
thanks

bmfm64 · 01-19-2016, 06:58 PM

Gas pedal assembly still available?

DLTruck1973 · 01-19-2016, 07:15 PM

Quote:

Originally Posted by bmfm64

Gas pedal assembly still available?

Yes, PM returned.

Thank you,
Thomas

**aotte1** · 01-20-2016, 11:51 AM

Thomas,

Bell housing cast iron for SM465 and clutch fork.

Thanks,
Les

DLTruck1973 · 01-20-2016, 12:16 PM

Quote:

Originally Posted by aotte1

Thomas,

Bell housing cast iron for SM465 and clutch fork.

Thanks,
Les

Give me a little time this morning and I will get you a price. I need your zip code for shipping please. I probably could find it but quicker if you just send it again,

Thank you,
Thomas

DLTruck1973 · 01-20-2016, 01:03 PM

Quote:

Originally Posted by aotte1

Thomas,

Bell housing cast iron for SM465 and clutch fork.

Thanks,
Les

Hi Les,

I found your zip code. $60.00 for the bell housing and the fork. $37.00 for shipping (heavy box) so $97.00 total.

Let me know,

Thank you,
Thomas

rdhowe2006@yahoo.com · 07-02-2016, 08:29 PM

Do you still have the air cleaner spacer? If so will it fit a 1 barrel carb? 1970 chevy c10 IL 6 250engine

Oldschool88 · 08-05-2016, 12:50 AM

looking for all parts to swap out a th350 to a sm465. I'll need a pedal assembly all the way to the release fork.
Posted via Mobile Device

mikesjaarda · 08-05-2016, 02:30 AM

Interested in the spare tire carrier, high hump tunnel, 4 spd steering column, also need a working non air heater control, also need the parking brake levers and strut bars for rear drums. Let me know price shipped to 49418.

lyrikz · 08-05-2016, 10:47 AM

Quote:

Originally Posted by Oldschool88

looking for all parts to swap out a th350 to a sm465. I'll need a pedal assembly all the way to the release fork.
Posted via Mobile Device

Dude, i LITERALLY just threw that all away.. Everything. I do have the pedal assembly still in the truck.

rdhowe2006@yahoo.com · 08-05-2016, 09:20 PM

Do you still have the rear view mirror? If so could you send a close up pic of the front and back? Also is still available how much to ship to 70714? Thanks Ron

metalheadlongbed · 08-08-2016, 05:49 AM

is the steering wheel still avaliable?

Cesar Diaz · 08-13-2016, 06:29 PM

If bow ties original I'll pay the$30.00 let me know shipped to 91381 and I will send payment also how much for rear view mirror and do you have oil pressure tubing w fittings and how much.

Msaslp · 08-15-2016, 10:08 PM

Do you still have the disc brake setup for sale? Also is it complete with sindles and everything?

toyplumbertrucks · 08-16-2016, 08:04 PM

I'd like to know if the small block engine stands are still available. Also I am looking for a set of brackets ( not sure what their called) that clamp the rear axle to the leaf springs. I am working on a 72 c10 truck.

63frankintruck · 08-16-2016, 08:19 PM

I'm looking for rear bumper brackets to 72 C10, for my brother and his daughters project truck
Thanks
Dan

projectking · 08-16-2016, 09:34 PM

Quote:

Originally Posted by toyplumbertrucks

I'd like to know if the small block engine stands are still available. Also I am looking for a set of brackets ( not sure what their called) that clamp the rear axle to the leaf springs. I am working on a 72 c10 truck.

Spring perches? There welded to the axle tubes

**71CHEVYSHORTBED402** · 08-16-2016, 11:32 PM

Suffice to say Tom is at the very least semi-retired. Shame for us. Personally, I got a lot of parts off Tom & Tom, and they were AWESOME. But they've earned another direction and best of luck to them.

toyplumbertrucks · 08-17-2016, 06:21 AM

[QUOTE=projectking;7685471]Spring perches? There welded to

They may be called spring perches. People call parts whatever they want to call them. But the ones I am talking about are for a leaf spring rear end that the u shaped bolts clamp too.
They're definitely not welded! I will post a picture of what I want when I get to work.

toyplumbertrucks · 08-17-2016, 07:29 AM

[quote=toyplumbertrucks;7685729]

Quote:

Originally Posted by projectking

Spring perches? There welded to

They may be called spring perches. People call parts whatever they want to call them. But the ones I am talking about are for a leaf spring rear end that the u shaped bolts clamp too.
They're definitely not welded! I will post a picture of what I want when I get to work.

**c10-72 II** · 08-20-2016, 12:23 AM

how much just for the upper and lower control arms shipped to 60007 IL? Thanks

11-10-2015, 01:32 PM	#254
jlampka Registered User Join Date: Sep 2013 Location: North Tonawanda, NY Posts: 236	Re: 1972 C10 Parting Photo 5 - need center grill brace only with all the clips and screws - do not need the hood latch as I already have one. shipped to 14120. Thanks. Jeff in North Tonawanda, NY

11-10-2015, 08:13 PM	#255
w4625 Registered User Join Date: Nov 2004 Location: North Augusta,SC Posts: 59	Re: 1972 C10 Parting Thomas I will pass on the parking light lens thanks

01-19-2016, 06:58 PM	#256
bmfm64 Registered User Join Date: May 2011 Location: Covington, Wa Posts: 5,240	Re: 1972 C10 Parting Gas pedal assembly still available?

01-20-2016, 11:51 AM	#258
aotte1 Senior Member Join Date: Oct 2013 Location: lousiville Ky Posts: 2,637	Re: 1972 C10 Parting Thomas, Bell housing cast iron for SM465 and clutch fork. Thanks, Les

07-02-2016, 08:29 PM	#261
rdhowe2006@yahoo.com Registered User Join Date: May 2016 Location: Summit, MS. Posts: 188	Re: 1972 C10 Parting Do you still have the air cleaner spacer? If so will it fit a 1 barrel carb? 1970 chevy c10 IL 6 250engine

08-05-2016, 12:50 AM	#262
Oldschool88 Registered User Join Date: Jun 2016 Location: Calgary AB Posts: 17	Re: 1972 C10 Parting looking for all parts to swap out a th350 to a sm465. I'll need a pedal assembly all the way to the release fork. Posted via Mobile Device

08-05-2016, 02:30 AM	#263
mikesjaarda Registered User Join Date: Aug 2016 Location: grandville, michigan Posts: 24	Re: 1972 C10 Parting Interested in the spare tire carrier, high hump tunnel, 4 spd steering column, also need a working non air heater control, also need the parking brake levers and strut bars for rear drums. Let me know price shipped to 49418.

08-05-2016, 09:20 PM	#265
rdhowe2006@yahoo.com Registered User Join Date: May 2016 Location: Summit, MS. Posts: 188	Re: 1972 C10 Parting Do you still have the rear view mirror? If so could you send a close up pic of the front and back? Also is still available how much to ship to 70714? Thanks Ron

08-08-2016, 05:49 AM	#266
metalheadlongbed Registered User Join Date: Aug 2016 Location: paulding georgia Posts: 10	Re: 1972 C10 Parting is the steering wheel still avaliable?

08-13-2016, 06:29 PM	#267
Cesar Diaz Registered User Join Date: Jun 2016 Location: Stevenson Ranch, CA Posts: 62	Re: 1972 C10 Parting If bow ties original I'll pay the$30.00 let me know shipped to 91381 and I will send payment also how much for rear view mirror and do you have oil pressure tubing w fittings and how much.

08-15-2016, 10:08 PM	#268
Msaslp Registered User Join Date: May 2016 Location: Greer, SC Posts: 4	Re: 1972 C10 Parting Do you still have the disc brake setup for sale? Also is it complete with sindles and everything?

08-16-2016, 08:04 PM	#269
toyplumbertrucks Registered User Join Date: Aug 2012 Location: st. john, in Posts: 280	Re: 1972 C10 Parting I'd like to know if the small block engine stands are still available. Also I am looking for a set of brackets ( not sure what their called) that clamp the rear axle to the leaf springs. I am working on a 72 c10 truck.

08-16-2016, 08:19 PM	#270
63frankintruck Registered User Join Date: Oct 2015 Location: Keller, tx Posts: 426	Re: 1972 C10 Parting I'm looking for rear bumper brackets to 72 C10, for my brother and his daughters project truck Thanks Dan

08-16-2016, 11:32 PM	#272
71CHEVYSHORTBED402 Senior Member Join Date: Feb 2009 Location: Northern Nevada Posts: 7,151	Re: 1972 C10 Parting Suffice to say Tom is at the very least semi-retired. Shame for us. Personally, I got a lot of parts off Tom & Tom, and they were AWESOME. But they've earned another direction and best of luck to them. __________________ Tony 71 Custom Deluxe, SWB, 2WD, 402, A/C. I developed an assm. guide "kit" for restoring the truck from ground up. With assys, the guide accts for 1000s details, OEM identifications & part numbers, written in short order. 700+ images of assm., illust., charts, and points of interest. Much of the info. applies to all 67-72 GM trucks, and to a lessor degree all 67-72 GM vehicles. My build thread, and more on the guide https://67-72chevytrucks.com/vboard/...d.php?t=730025

08-17-2016, 06:21 AM	#273
toyplumbertrucks Registered User Join Date: Aug 2012 Location: st. john, in Posts: 280	Re: 1972 C10 Parting [QUOTE=projectking;7685471]Spring perches? There welded to They may be called spring perches. People call parts whatever they want to call them. But the ones I am talking about are for a leaf spring rear end that the u shaped bolts clamp too. They're definitely not welded! I will post a picture of what I want when I get to work.



Register or Log In To remove these advertisements.

08-20-2016, 12:23 AM	#275
c10-72 II Active Member Join Date: Sep 2013 Location: Elk Grove Village IL Posts: 152	Re: 1972 C10 Parting how much just for the upper and lower control arms shipped to 60007 IL? Thanks

Register or Log In To remove these advertisements.