The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 02-12-2010, 06:01 PM   #1
junkman
Registered User
 
Join Date: Jun 2007
Location: metropolis il
Posts: 91
new to me 71

Just sealed the deal on this little gem, 71 c20, custom camper, 402/th400, ps/air. Bought it from my uncle whose had it since 71. It has been sitting since 97, had a crack in the radiator that he had repaired but never put the radiator back on it. Has been sitting in the barn until a few weeks ago, pulled it out because he needed the room. He knew I was kinda into them and hit me up about it to see if I would be interested. It has been a farm truck all it's life, and I hadn't seen it in close to 20, so I figured the body would be toast. There is a quarter size rust hole in the driver cab corner, and a little bubbling on the pass door, that is it, even the driver floor is just surface rusty. I couldn't believe the shape its in, was left with no choice but to buy it, esp for the price. The grill and interior is in great shape. I am going to give it a good scrub down and get it running/driving for now. I don't know it's fate from there. I hate to say but likely a swb 1/2 ton conversion. I have a 69 swb in the garage with a 5.3/4l60e swap I really at least need to get driving before I dig too much into another one.







The current project
junkman is offline   Reply With Quote
Old 02-12-2010, 06:05 PM   #2
my67chevytruck
Under Construction
 
my67chevytruck's Avatar
 
Join Date: Oct 2007
Location: Midlothian,TX (DFW)
Posts: 4,555
Re: new to me 71

looks like a nice truck to me! best of luck with both of your projects.!
__________________
Heath

subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php

http://67-72chevytrucks.com/vboard/s...d.php?t=157669
FAQ how to's


1956 Chevy Apache
1967 C10 SWB FleetSide (under construction)
1969 K10 SWB FleetSide (Future Build)
1972 C10 SWB Stepside (Future Build)


56 chevy truck :
http://www.cardomain.com/ride/2955823/1

67 truck build:

http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1


69 k10:
http://67-72chevytrucks.com/vboard/s...d.php?t=389470
my67chevytruck is offline   Reply With Quote
Old 02-12-2010, 06:14 PM   #3
DZL1
One day.....
 
DZL1's Avatar
 
Join Date: Aug 2008
Location: Ocala, FL.
Posts: 702
Re: new to me 71

Very nice!!

DZL1.
DZL1 is offline   Reply With Quote
Old 02-12-2010, 07:36 PM   #4
Longhorn Man
its all about the +6 inches
 
Longhorn Man's Avatar
 
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
Re: new to me 71

get it running, clean it real good, wax it real good, get rid of the split rims and drive it.
Longhorn Man is offline   Reply With Quote
Old 02-12-2010, 07:41 PM   #5
GREASEMONKEY72
Registered User
 
GREASEMONKEY72's Avatar
 
Join Date: Aug 2006
Location: Bakersfield,CA
Posts: 7,893
Re: new to me 71

Quote:
Originally Posted by Longhorn Man View Post
get it running, clean it real good, wax it real good, get rid of the split rims and drive it.
__________________
-steven
Alte Seele S.S.

"Allison" '72 C/10 LWB 350SB/TH350 - DD

PITBULL IS NOT A CRIME
GREASEMONKEY72 is offline   Reply With Quote
Old 02-12-2010, 08:14 PM   #6
Se7en Deuce
Registered User
 
Se7en Deuce's Avatar
 
Join Date: Jan 2010
Location: Covington, WA.
Posts: 55
Re: new to me 71

nice truck, i just got mine a lil while ago and it runs good so im using it as a parts hauler for now untill im ready for body work. I wish i had a swb 1/2 also then I would just build this one for towing/work etc.
Se7en Deuce is offline   Reply With Quote
Old 02-13-2010, 12:14 AM   #7
laplander
Registered User
 
Join Date: Nov 2002
Location: NM
Posts: 705
Re: new to me 71

That thing is entirely WAY too far gone to even mess with. PM me your address and I'll send a friend over so I can dispose of it for you.

I'd do what the other posters said, clean it and then just drive the snot out of it.
laplander is offline   Reply With Quote
Old 02-13-2010, 12:25 AM   #8
Sublvr72
Account Suspended
 
Sublvr72's Avatar
 
Join Date: May 2004
Location: Simi Valley, CA
Posts: 1,387
Re: new to me 71

nice score, congrats on the new truck
Sublvr72 is offline   Reply With Quote
Old 02-13-2010, 01:21 AM   #9
red71c10
The Red Menace
 
red71c10's Avatar
 
Join Date: Feb 2009
Location: Roseburg, OR
Posts: 577
Re: new to me 71

Viva la '71!!!
__________________
1971 Custom 10 - 350/350TH - Pwr steering, gauges, Chrome front bumper, Chrome hubcaps, Door edge guards, HD rear springs (current)
1968 C-20 Custom Camper - 350/350TH (orig 327), Pwr steering & brakes, gauges w/tach (former)
1968 C-20 - 307/3sp column (Dad's when I was a kid)

"Driving is like coloring. Things get messy if you can't stay inside the lines."
red71c10 is offline   Reply With Quote
Old 02-13-2010, 01:32 AM   #10
leddzepp
Moderator
 
leddzepp's Avatar
 
Join Date: May 2007
Location: Southern Cal
Posts: 19,989
Thumbs up Re: new to me 71

Looks like my twin

I have the same truck (except a 72) and am converting it to a 1/2 ton SWB as we speak. Ochre trucks seem to be the best survivors for some reason...
Attached Images
 
__________________
1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed.

1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck.


RIP ElJay
RIP 67ChevyRedneck
RIP Grumpy Old Man
leddzepp is offline   Reply With Quote
Old 02-13-2010, 04:14 AM   #11
junkman
Registered User
 
Join Date: Jun 2007
Location: metropolis il
Posts: 91
Re: new to me 71

Quote:
Originally Posted by leddzepp View Post
Looks like my twin

I have the same truck (except a 72) and am converting it to a 1/2 ton SWB as we speak. Ochre trucks seem to be the best survivors for some reason...

Man it does look like it's twin, Nice lookin start you have, I wish I had your trim. I'll have to keep an eye on your progress. Funny you mention that about the ochre trucks. There are 2 other ones here in town that are for the most part og, and have lasted very well. One of them has some sort of old business logo on the bedside, looks perfect as it is. First task will definitly be getting it running and moving. I can push/move the shorty around by myself, I don't think that will be the case with this tank.

Last edited by junkman; 02-13-2010 at 04:15 AM.
junkman is offline   Reply With Quote
Old 02-13-2010, 07:16 AM   #12
jim zag
ENGINE BUILDER
 
jim zag's Avatar
 
Join Date: Apr 2006
Location: Shortsville n.y.
Posts: 344
Re: new to me 71

I would put modern rims and tires on it and use it to pull my car trailer home with more old truck stuff. That big block will tow just about anything! Use it as a TRUCK!!!!
__________________
JIM ZAG
jim zag is offline   Reply With Quote
Old 02-13-2010, 09:36 AM   #13
rsavage
Registered User
 
rsavage's Avatar
 
Join Date: Aug 2009
Location: Alden NY
Posts: 2,705
Re: new to me 71

Looks like a nice solid truck. If it were mine, I'd restore it as it was built and use it some. I cringe at the number of these trucks that are being cut up. Another 10 years and there won't be any originals left (well maybe I'm exaggerating some). In any event - nice score.
__________________
1961 C1 Corvette
1959 El Camino 350 TPI, 9" 4 w disc
69 Blazer K5 - sold July '20
2021 Durango RT 5.7
rsavage is offline   Reply With Quote
Old 07-05-2016, 07:36 AM   #14
Coursey
Registered User
 
Coursey's Avatar
 
Join Date: Aug 2013
Location: Kentucky
Posts: 549
Re: new to me 71

Looks good. Any updates?
Coursey is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:28 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com