|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
08-01-2018, 10:50 AM
|
#1 |
|
Junior Member
 
Join Date: Dec 2017
Location: Lorsch - Germany
Posts: 40
|
Need trany rods and levers
I have this trany.
Should be a Munice SM 318 3 speed. Right? I plan to change from the floor to the column I run a 61 PU with a 235. I need the rods, levers and the shifter. (and all the parts I dont know) Does anybody have some laying around and will sell them? Last edited by Joerg; 08-01-2018 at 01:50 PM. |
|
|
|
08-01-2018, 02:55 PM
|
#2 |
|
One foot in front of the other
Join Date: Aug 2008
Location: Parrottsville, TN
Posts: 5,430
|
Re: Need trany links and levers
Have these rods that pulled from a '65. Will need new bushings.
Do you need the column parts too? |
|
|
|
|
08-02-2018, 02:13 AM
|
#3 | |
|
Junior Member
Join Date: Dec 2017
Location: Lorsch - Germany
Posts: 40
|
Re: Need trany links and levers
Quote:
No I dont need the column parts except the shifter. Do you have it too? About the brushings, do you know where I can get them? Next question is how to put the money to you, cause I'm from Germany. I have a shipping address in the USA where the parts can be shipped and they will ship them to me or you can send them directly to me using www.ipsparcel.com. You can get the shipping quote online and request to pick up the package from your home.... I have paypal too. So do you see any way to sell and send the rods and levers to me? Thank you Joerg. |
|
|
|
|
|
08-02-2018, 05:37 AM
|
#4 |
|
Registered User
Join Date: Nov 2013
Location: Mayetta, Kansas
Posts: 439
|
Re: Need trany links and levers
Just to let you no the column is different on a 61 the turn single switch works off of a cable. I have the column and the levers and the rods out off a 61 $ 150.00 plus shipping. If DPowers cant fix you up then let me no thanks
|
|
|
|
|
08-02-2018, 07:16 AM
|
#5 |
|
One foot in front of the other
Join Date: Aug 2008
Location: Parrottsville, TN
Posts: 5,430
|
Re: Need trany links and levers
Shortstep60 would probably be your best bet then as the only thing I have are the rods.
|
|
|
|
|
08-02-2018, 11:02 AM
|
#6 | |
|
Junior Member
Join Date: Dec 2017
Location: Lorsch - Germany
Posts: 40
|
Re: Need trany links and levers
Quote:
do you have a shifter too? I'll PM you. Thanks Joerg |
|
|
|
|
|
08-02-2018, 11:11 AM
|
#7 | |
|
Junior Member
Join Date: Dec 2017
Location: Lorsch - Germany
Posts: 40
|
Re: Need trany links and levers
Quote:
|
|
|
|
|
|
08-02-2018, 12:23 PM
|
#8 |
|
Registered User
Join Date: Nov 2013
Location: Mayetta, Kansas
Posts: 439
|
Re: Need trany links and levers
I should have everything will check it out and get back with you thanks
|
|
|
|
|
08-02-2018, 03:31 PM
|
#9 |
|
Registered User
Join Date: Nov 2013
Location: Mayetta, Kansas
Posts: 439
|
Re: Need trany links and levers
I have everything but the levers that go on the trans
|
|
|
|
|
08-02-2018, 03:50 PM
|
#10 | |
|
Junior Member
Join Date: Dec 2017
Location: Lorsch - Germany
Posts: 40
|
Re: Need trany links and levers
Quote:
Are they missing or what. Sorry but I dont understand that. Does that mean yo dont have the levers? Last edited by Joerg; 08-02-2018 at 03:58 PM. |
|
|
|
|
|
08-03-2018, 05:32 AM
|
#11 |
|
Registered User
Join Date: Nov 2013
Location: Mayetta, Kansas
Posts: 439
|
Re: Need trany links and levers
I have everything but the trans levers
|
|
|
|
|
08-03-2018, 05:48 AM
|
#12 | |
|
Junior Member
Join Date: Dec 2017
Location: Lorsch - Germany
Posts: 40
|
Re: Need trany links and levers
Quote:
Thank you |
|
|
|
|
|
08-03-2018, 02:17 PM
|
#13 |
|
Junior Member
Join Date: Dec 2017
Location: Lorsch - Germany
Posts: 40
|
Re: Need trany links and levers
shortstep60 I dont know what happen, I send it again....take a look
|
|
|
|
|
| Bookmarks |
|
|
Linear Mode
