The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 08-12-2019, 03:10 PM   #1
dieseltech
Registered User
 
Join Date: Jun 2010
Location: Bobcaygeon,Ontario CANADA
Posts: 126
Dodge Dana 60 spring perch heights

Hey I did a bit of searching but came up empty. I’m putting a 93 D60 in the front of my 86 K10 and noticed that when I mounted the axle and it appears the spring perch is taller on the drivers side than on the passenger side. Any one ever run into this?
__________________
1986 Chevy Wrangler 4x4
305/700r4

6" lift
37x14.50x15
dieseltech is offline   Reply With Quote
Old 08-12-2019, 05:54 PM   #2
sweetk30
Registered User
 
sweetk30's Avatar
 
Join Date: May 2012
Location: horseheads,ny rust belt
Posts: 2,794
Re: Dodge Dana 60 spring perch heights

only real problem is fixed with this kit here that i know of . http://offroaddesign.com/catalog/Dod...apBushings.htm

and just a fyi you get almost 1" of lift on a dana 60 swap cause its so much bigger .
__________________
77-k30lb BIG truck build .
87-k30lb budget beater build .
85-k30lb the plow machine build .
85-c10sb summer fun toy .
-----------------------------
HOLLEY SNIPER efi = worst case of p.i.t.a i ever had .

EDELBROCK pro flo 4 = best deal going so far . love my setup works great.
sweetk30 is offline   Reply With Quote
Old 08-13-2019, 08:18 AM   #3
dieseltech
Registered User
 
Join Date: Jun 2010
Location: Bobcaygeon,Ontario CANADA
Posts: 126
Re: Dodge Dana 60 spring perch heights

Quote:
Originally Posted by sweetk30 View Post
only real problem is fixed with this kit here that i know of . http://offroaddesign.com/catalog/Dod...apBushings.htm

and just a fyi you get almost 1" of lift on a dana 60 swap cause its so much bigger .

Yes I got that issue sorted as I’m using all aftermarket spring hangers. The issue is that the drivers side spring perch is physically taller than the passenger side perch. Not sure if there is a small lift block that’s supposed to be there or not.
__________________
1986 Chevy Wrangler 4x4
305/700r4

6" lift
37x14.50x15
dieseltech is offline   Reply With Quote
Old 08-13-2019, 03:41 PM   #4
sweetk30
Registered User
 
sweetk30's Avatar
 
Join Date: May 2012
Location: horseheads,ny rust belt
Posts: 2,794
Re: Dodge Dana 60 spring perch heights

i worked on 1 truck my self with a dodge under a gm and did not notice a problem .


have you realy looked it over with a tape measure from pad to tube ? the gm 60 uses a taller perch on driver side than 1/2 and 3/4 ton fronts do . so it might be a optical illusion .

otherwise set her up and measure the truck and if need be add in a old leaf spring cut down to just a spacer length and add it in the bottom of the pack to level it out via sandwiching it with the center pin like a leaf .
__________________
77-k30lb BIG truck build .
87-k30lb budget beater build .
85-k30lb the plow machine build .
85-c10sb summer fun toy .
-----------------------------
HOLLEY SNIPER efi = worst case of p.i.t.a i ever had .

EDELBROCK pro flo 4 = best deal going so far . love my setup works great.
sweetk30 is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:11 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com