Canada Parting 1971 Blazer - The 1947 - Present Chevrolet & GMC Truck Message Board Network

audaciousduo · 07-21-2015, 02:47 PM

Before I take the gas axe to this rust bucket I thought I'd do the right thing and see if there is anyone that needs anything off it before it goes to the metal pile. The truck has terminal cancer everywhere and there isn't a ton of sheet metal worth saving. I'm keeping the frame for a future project and partial to the blue interior with utility buckets and rear bench. The hard top is cracked every where and not repairable. Other than that it's up for grabs, cheap. The only issue is I'm busy, very busy and absolutely do not have time to be running around getting shipping quotes. I charge shipping only and do make a run to Montana once a month or so and will ship from there as it's substantially cheaper if you can wait.

**MikeCofield** · 07-21-2015, 05:05 PM

Interested in stainless strips that hold top down ,carpet strips and carpet leveling mats if it has them and you decide to part out

audaciousduo · 07-21-2015, 05:13 PM

They are rusted through. If by leveling mats you mean the rubber floor mats, they are garbage as well.

Sorry

Dave

Quote:

Originally Posted by MikeCofield

Interested in stainless strips that hold top down ,carpet strips and carpet leveling mats if it has them and you decide to part out

JimH2828 · 07-21-2015, 05:56 PM

Interested in the below items if they are worth saving. I can wait till you are in MT to ship. Is there anything under the hood?

- NP205 high hump, stick, knob, boot ring, lower bolt and rod bars
- seat belts - if u r not keeping
- vent window ferrules and screws
- speedo cable
- guage cluster fiber optic cable, indicator and bulb socket
- CB radio and speaker bracket if it's there

Thanks
Jim

**chewysask** · 07-21-2015, 05:56 PM

How is the door glass and the black rubber stopper piece attached to the door between the top and door vertically.
Thanks Carey

Jake1971 · 07-21-2015, 06:36 PM

Are the blue defrost vents and retainer clips intact? If so I will take them, ship to 78602. No rush, I can wait for your trip to Montana.

**my71gmc** · 07-21-2015, 07:23 PM

Do you have the plastic door ferrules under the wing windows? 1 in each door... Thank you.

**1rippen6** · 07-21-2015, 09:39 PM

Just an FYI if you cut the bucket seat bracket out it is the same as the trucks will sale it quick on the truck side for 60-80 depending on condition plus shipping.

**Blazerowner** · 07-23-2015, 01:06 AM

I'm interested in the rear seat arm rest bars if they aren't rusted. Also the front and rear brackets that bolt the seat to the floor. Zip is 95982.

tjsblazer · 07-23-2015, 02:15 AM

I'd be interested in the floor brkt that the passenger side seat locks to when it is down.

**6t727t2** · 07-23-2015, 06:22 AM

I would be interested in any top to body hold down brackets and hatch hinges.

**hybridchevy71** · 07-23-2015, 12:22 PM

I'm interested on the rear seat complete with brackets if they are not rusted out. Shipped to 92704

**1968k20** · 07-23-2015, 06:31 PM

Interested in radio shipped to 96020 from Montana please! I can wait

Maddoxdb · 07-23-2015, 10:57 PM

I need the rear arm rests pads. Also the arm rest bars if they get to me. Let me know a total and I'll get you paid. I can wait on shipping. Thanks, Dustin.

Jake1971 · 08-01-2015, 03:11 PM

OP Last Activity: 07-21-2015 04:13 PM..... Hope he is okay...

**70STOVEBOLT** · 10-01-2015, 09:48 AM

Looking for blue door arm rests, not in a hurry, let me know if you have them.

Thanks,
Mark

**craneboy72** · 10-01-2015, 02:16 PM

are the tail light lens and reverse light lens any good?

71suburban/70CST · 10-01-2015, 07:54 PM

How are the Rear Seat Seat Belts? If they are decent I will take them pending better picture(s) and price.
Thanks
Justin

**1972BackInBlackC10** · 10-02-2015, 06:45 AM

ill get in line if it gets to me I need

1) mounting hardware and bolts for the top
2) sun visors
3) seat belts front and back with bolts
4) mounting hardware and bolts for the rear seat

id be interested in the top and rear seat too but it would cost way too much to get it to sask

Jake1971 · 10-04-2015, 10:31 AM

Looks as if the OP has forgotten this wonderful Forum.
Last Activity: 08-30-2015 08:44 AM
hope he is okay.

70blackfish · 10-04-2015, 11:30 PM

rear drum brakes, just the backing plates

1970greenburb · 10-05-2015, 02:52 PM

Hello i would be interested in the driver side seat brackets if picture could be sent and if they are what i am looking for. Price and shipped to 98247 Thanks

07-21-2015, 02:47 PM	#1
audaciousduo Registered User Join Date: Jan 2014 Location: Vancouver Island B.C. Posts: 140	Parting 1971 Blazer Before I take the gas axe to this rust bucket I thought I'd do the right thing and see if there is anyone that needs anything off it before it goes to the metal pile. The truck has terminal cancer everywhere and there isn't a ton of sheet metal worth saving. I'm keeping the frame for a future project and partial to the blue interior with utility buckets and rear bench. The hard top is cracked every where and not repairable. Other than that it's up for grabs, cheap. The only issue is I'm busy, very busy and absolutely do not have time to be running around getting shipping quotes. I charge shipping only and do make a run to Montana once a month or so and will ship from there as it's substantially cheaper if you can wait. Attached Images

07-21-2015, 05:05 PM	#2
MikeCofield Senior Member Join Date: Dec 2010 Location: Eastaboga AL Posts: 4,913	Re: Parting 1971 Blazer Interested in stainless strips that hold top down ,carpet strips and carpet leveling mats if it has them and you decide to part out

07-21-2015, 05:56 PM	#4
JimH2828 Registered User Join Date: Oct 2012 Location: Cumming GA Posts: 613	Re: Parting 1971 Blazer Interested in the below items if they are worth saving. I can wait till you are in MT to ship. Is there anything under the hood? - NP205 high hump, stick, knob, boot ring, lower bolt and rod bars - seat belts - if u r not keeping - vent window ferrules and screws - speedo cable - guage cluster fiber optic cable, indicator and bulb socket - CB radio and speaker bracket if it's there Thanks Jim

07-21-2015, 05:56 PM	#5
chewysask Active Member Join Date: Apr 2013 Location: Saskatoon, Sask Posts: 193	Re: Parting 1971 Blazer How is the door glass and the black rubber stopper piece attached to the door between the top and door vertically. Thanks Carey

07-21-2015, 06:36 PM	#6
Jake1971 Registered User Join Date: Oct 2013 Location: Bonnerdale, AR Posts: 697	Re: Parting 1971 Blazer Are the blue defrost vents and retainer clips intact? If so I will take them, ship to 78602. No rush, I can wait for your trip to Montana. __________________ 1971 Bone Stock C10 project "Jake" 1997 Sierra SLT factory short bed "Silver Bullet"

07-21-2015, 07:23 PM	#7
my71gmc Senior Member Join Date: Mar 2012 Location: Lake City MN Posts: 220	Re: Parting 1971 Blazer Do you have the plastic door ferrules under the wing windows? 1 in each door... Thank you.

07-21-2015, 09:39 PM	#8
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,714	Re: Parting 1971 Blazer Just an FYI if you cut the bucket seat bracket out it is the same as the trucks will sale it quick on the truck side for 60-80 depending on condition plus shipping.

07-23-2015, 01:06 AM	#9
Blazerowner Senior Member Join Date: Apr 2006 Location: Yuba City, Ca Posts: 1,926	Re: Parting 1971 Blazer I'm interested in the rear seat arm rest bars if they aren't rusted. Also the front and rear brackets that bolt the seat to the floor. Zip is 95982. __________________ Kirk 72 Blazer CST 4wd highlander 66 Nova

07-23-2015, 02:15 AM	#10
tjsblazer Registered User Join Date: Oct 2009 Location: Great White North Posts: 1,520	Re: Parting 1971 Blazer I'd be interested in the floor brkt that the passenger side seat locks to when it is down. __________________ Jeff. '72 Blazer K5 "Camshaft opinions are like belly buttons; everyone has one and no two are alike" My Blazer Build: http://67-72chevytrucks.com/vboard/s...d.php?t=626752 My Engine Build: http://67-72chevytrucks.com/vboard/s...d.php?t=637336

07-23-2015, 06:22 AM	#11
6t727t2 Active Member Join Date: Dec 2004 Location: NJ Posts: 6,432	Re: Parting 1971 Blazer I would be interested in any top to body hold down brackets and hatch hinges.

07-23-2015, 12:22 PM	#12
hybridchevy71 Registered User Join Date: Mar 2009 Location: Anaheim, CA Posts: 177	Re: Parting 1971 Blazer I'm interested on the rear seat complete with brackets if they are not rusted out. Shipped to 92704

07-23-2015, 06:31 PM	#13
1968k20 Senior Member Join Date: Dec 2009 Location: Chester,California Posts: 5,618	Re: Parting 1971 Blazer Interested in radio shipped to 96020 from Montana please! I can wait

07-23-2015, 10:57 PM	#14
Maddoxdb Registered User Join Date: Jun 2011 Location: Elk city ok Posts: 891	Re: Parting 1971 Blazer I need the rear arm rests pads. Also the arm rest bars if they get to me. Let me know a total and I'll get you paid. I can wait on shipping. Thanks, Dustin.

08-01-2015, 03:11 PM	#15
Jake1971 Registered User Join Date: Oct 2013 Location: Bonnerdale, AR Posts: 697	Re: Parting 1971 Blazer OP Last Activity: 07-21-2015 04:13 PM..... Hope he is okay... __________________ 1971 Bone Stock C10 project "Jake" 1997 Sierra SLT factory short bed "Silver Bullet"

10-01-2015, 09:48 AM	#16
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,225	Re: Parting 1971 Blazer Looking for blue door arm rests, not in a hurry, let me know if you have them. Thanks, Mark __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear



Register or Log In To remove these advertisements.

10-01-2015, 02:16 PM	#17
craneboy72 Senior Member Join Date: Jun 2015 Location: Acton Ma Posts: 745	Re: Parting 1971 Blazer are the tail light lens and reverse light lens any good?

10-01-2015, 07:54 PM	#18
71suburban/70CST Registered User Join Date: Feb 2010 Location: Chestertown, Md Posts: 102	Re: Parting 1971 Blazer How are the Rear Seat Seat Belts? If they are decent I will take them pending better picture(s) and price. Thanks Justin

10-02-2015, 06:45 AM	#19
1972BackInBlackC10 Senior Member Join Date: Jan 2012 Location: Estevan, Saskatchewan Posts: 1,025	Re: Parting 1971 Blazer ill get in line if it gets to me I need 1) mounting hardware and bolts for the top 2) sun visors 3) seat belts front and back with bolts 4) mounting hardware and bolts for the rear seat id be interested in the top and rear seat too but it would cost way too much to get it to sask

10-04-2015, 10:31 AM	#20
Jake1971 Registered User Join Date: Oct 2013 Location: Bonnerdale, AR Posts: 697	Re: Parting 1971 Blazer Looks as if the OP has forgotten this wonderful Forum. Last Activity: 08-30-2015 08:44 AM hope he is okay. __________________ 1971 Bone Stock C10 project "Jake" 1997 Sierra SLT factory short bed "Silver Bullet"

10-04-2015, 11:30 PM	#21
70blackfish Registered User Join Date: Oct 2012 Location: Newhall CA Posts: 1,195	Re: Parting 1971 Blazer rear drum brakes, just the backing plates __________________ 69 SWB 780hp Hellcat powered, manual 6 speed, currie 9

10-05-2015, 02:52 PM	#22
1970greenburb Registered User Join Date: Oct 2012 Location: Everson, wa Posts: 96	Re: Parting 1971 Blazer Hello i would be interested in the driver side seat brackets if picture could be sent and if they are what i am looking for. Price and shipped to 98247 Thanks

Register or Log In To remove these advertisements.