The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 11-12-2016, 03:10 PM   #1
wahl4m
Registered User
 
Join Date: Jan 2002
Location: norwalk,iowa,usa
Posts: 921
door wont open ??

customer says he bought a 70 chevy truck/been in a garage several yrs /had a hole in garage roof and leaked water on the drivers door BUT window was down a little and water got in door opening{inside door} mechanism and got rusty !! now door wont open -with inner or outer latch !he says he sprayed and oiled latch as best as possible ! still wont open ! any ideas ????? cant see how it will come open w/o cutting door apart ??
wahl4m is offline   Reply With Quote
Old 11-12-2016, 03:49 PM   #2
Deer_hunter_088
Registered User
 
Deer_hunter_088's Avatar
 
Join Date: Aug 2016
Location: Mount Carmel Illinois
Posts: 1,321
Re: door wont open ??

Pb blaster and a couple weeks.
__________________
1994 k1500, Oldredz71(ext shorty 4x4 6 in lift)
1998 S10ZR2
2005 Silverado 2500hd(tow pig)


Made in the USA, just like my trucks
Deer_hunter_088 is offline   Reply With Quote
Old 11-12-2016, 04:39 PM   #3
Gmc.guy
Registered User
 
Gmc.guy's Avatar
 
Join Date: Nov 2015
Location: Alberta
Posts: 464
Re: door wont open ??

I just did this on an '83. Keep oiling and work the outside and inside handles (not rough) and push lock button up and down to work the lube in. If the outside button and levers are stuck and not moving you should be able to take the seat out and remove door panel
__________________
-Cody
Gmc.guy is offline   Reply With Quote
Old 11-12-2016, 04:40 PM   #4
Andy4639
Old member
 
Andy4639's Avatar
 
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,936
Talking Re: door wont open ??

Window down. Long screw driver pry on the door latch inside the door while you put pressure on the door with your feet from the inside.
It would help to have some one lay down in the seat to put pressure on it.
If that doesn't work, take fender off and un bolt the hinges to the door.
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver
Seeing the USA in a 71


Upstate SC GM Truck Club
2013,14 and 2016 Hot Rod Pour Tour


http://upstategmtrucks.com/



Get out and drive the truck this summer and have some fun!
It sucks not being able to hear!

LWB trucks rule, if you don't think so measure your SWB!
After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.
Andy4639 is offline   Reply With Quote
Old 11-12-2016, 04:52 PM   #5
Gmc.guy
Registered User
 
Gmc.guy's Avatar
 
Join Date: Nov 2015
Location: Alberta
Posts: 464
Red face Re: door wont open ??

Bumping the outside handle with a soft mallet will help too. (Not too hard). I'll trade you. I'm trying to get a locking gas cap out today
__________________
-Cody
Gmc.guy is offline   Reply With Quote
Old 11-12-2016, 05:04 PM   #6
Gmc.guy
Registered User
 
Gmc.guy's Avatar
 
Join Date: Nov 2015
Location: Alberta
Posts: 464
Re: door wont open ??

For sure if the window opens like Andy says is the best way
__________________
-Cody
Gmc.guy is offline   Reply With Quote
Old 11-12-2016, 05:21 PM   #7
zosoppp
Registered User
 
Join Date: Mar 2014
Location: Lincoln Park, NJ
Posts: 189
Re: door wont open ??

Also try putting firm pressure pushing the door in near the latch (not the handle).

My 1970 pass door wouldn't open, the door handle button was broken and pushed in but I was able to get the latch moving a little by pushing hard (no BFH) on the door skin to move the door in a little getting the latch to start working. Then I could open it from the inside, remove the inner panel.

From there I took out the latch itself from the door (three #3/4 phillips screws and a clipped rod inside the door) and worked it with the pb blaster til it was freed up.
__________________
1970 C10 LWB 350SBC, SM330 Muncie (not saginaw SM326) (on tree), 3.07 open (assumed), PS, PB, Idiot lights
zosoppp is offline   Reply With Quote
Old 11-12-2016, 05:27 PM   #8
Deer_hunter_088
Registered User
 
Deer_hunter_088's Avatar
 
Join Date: Aug 2016
Location: Mount Carmel Illinois
Posts: 1,321
Re: door wont open ??

Pb blaster works wonders and is cheap. Use the heck outa it. Tapping does something to loosen rust. Might have a latch if i can get it outa the door.
__________________
1994 k1500, Oldredz71(ext shorty 4x4 6 in lift)
1998 S10ZR2
2005 Silverado 2500hd(tow pig)


Made in the USA, just like my trucks
Deer_hunter_088 is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:55 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com