1966 suburban slammed fuel injected 6.2L - Page 10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Hart_Rod** · 07-09-2013, 03:06 PM

Also, what radiator cooler did you use? What are you using for your A/C compressor?

c.brown · 07-10-2013, 10:21 AM

Quote:

Originally Posted by Hart_Rod

take a look at this thread:

http://67-72chevytrucks.com/vboard/s...d.php?t=563461

Checked out the thread ,what's your motor set at in the pics thanks
Posted via Mobile Device

gostranger · 08-30-2013, 08:38 AM

hey any updates!?!

**Hart_Rod** · 08-30-2013, 08:56 AM

Quote:

Originally Posted by c.brown

Checked out the thread ,what's your motor set at in the pics thanks
Posted via Mobile Device

Sorry I missed this CB, it was at 7 to get the angles right. I'm waiting on some shorter motor mounts.

Quote:

Originally Posted by gostranger

hey any updates!?!

+1
Posted via Mobile Device

c.brown · 08-30-2013, 09:11 AM

Ya finally fired my engine for the first time fired on the second try ,just have to adjust fuel pressure then should be good thanks for the interest guys
Posted via Mobile Device

biohazardbill · 09-01-2013, 01:06 PM

Quote:

Originally Posted by kpc01

C.brown I saw you got a boyd welding tank. I am looking for one for my 64 suburban that I will be doing porterbuilt suspension on. Can you tell me if the tank he sells fits well with the porterbuilt and if it will allow it to drop all the way still? I'm doing a LS motor as well so will be doing the EFI tank probably exactly like yours. My stock tank is only an inch or so from the floor but its about 13" tall and his is 10" I believe.

Any input or advice?

I don't know if this is too late or not but I have a tank from them in my burb with PB suspension.

Here it is installed:
http://67-72chevytrucks.com/vboard/s...d.php?t=517669

I just got my FI pump from them the other day so I could also run FI. They still have the blueprint for specs. Will allow you to use factory fuel fill.

kpc01 · 09-02-2013, 03:14 PM

Quote:

Originally Posted by biohazardbill

I don't know if this is too late or not but I have a tank from them in my burb with PB suspension.

Here it is installed:
http://67-72chevytrucks.com/vboard/s...d.php?t=517669

I just got my FI pump from them the other day so I could also run FI. They still have the blueprint for specs. Will allow you to use factory fuel fill.

thanks for the link. I'll definitely be doing this to mine!

gostranger · 09-02-2013, 08:21 PM

Quote:

Originally Posted by c.brown

Ya finally fired my engine for the first time fired on the second try ,just have to adjust fuel pressure then should be good thanks for the interest guys
Posted via Mobile Device

Awesome news! That is a major step good job!!!
Posted via Mobile Device

meltmetal · 05-04-2014, 03:37 PM

Awesome burb, any more progress on it?

Leroy-B1 · 05-04-2014, 06:05 PM

Looking cool

gostranger · 05-05-2014, 05:39 AM

this thing should be getting close to being done! lets see some of the updates!!!

c.brown · 05-06-2014, 09:16 AM

Quote:

Originally Posted by meltmetal

Awesome burb, any more progress on it?

Quote:

Originally Posted by Leroy-B1

Looking cool

Quote:

Originally Posted by gostranger

this thing should be getting close to being done! lets see some of the updates!!!

Thanks for the interest and comments,finished up a few things going into winter,then worked to much to touch it,about to start getting at it again here's some pics /updates

c.brown · 05-06-2014, 09:26 AM

Drive shaft done,widened core support mouth for radiator and mocked up,

gostranger · 05-08-2014, 05:48 AM

awesome work!!!! looks great!!!!

meltmetal · 05-10-2014, 12:59 PM

Glad to see you're still cipping away at it!

c.brown · 05-11-2014, 06:44 PM

Quote:

Originally Posted by gostranger

awesome work!!!! looks great!!!!

Quote:

Originally Posted by meltmetal

Glad to see you're still cipping away at it!

Thanks guys,about to weld my exhaust together running a x pipe and flowmasters,I couldn't wait to here what they sounded like so I slipped them on real quick and fired it up ,I liked the way it sounded motivated me

BB72CHEVKT · 05-12-2014, 04:45 PM

Nice work. Your burb is going to be sweet!

c.brown · 05-15-2014, 08:02 PM

Quote:

Originally Posted by BB72CHEVKT

Nice work. Your burb is going to be sweet!

Thanks,hope to really get at it soon

**Hart_Rod** · 05-15-2014, 09:23 PM

Looking good CB what exhaust kit are you using?

c.brown · 07-04-2014, 03:29 PM

Quote:

Originally Posted by Hart_Rod

Looking good CB what exhaust kit are you using?

Sorry missed this,I used a universal pipe kit from speedway motors and the x part ordered off amazon

c.brown · 07-04-2014, 03:36 PM

Here's a better look at how I ran the exhaust just have to make some hangers now

c.brown · 07-04-2014, 03:47 PM

Here's another pic of exhaust

piratexpress1369a · 07-05-2014, 07:10 AM

that one hell of a bend on the header pipe ..is that the shifter linkage you had to go around

c.brown · 07-05-2014, 10:25 AM

Quote:

Originally Posted by piratexpress1369a

that one hell of a bend on the header pipe ..is that the shifter linkage you had to go around

No,it was the way header was made they where for a camaro fit good besides the bend

gostranger · 07-06-2014, 11:12 AM

my header has the same bend and it was for the truck!

07-09-2013, 03:06 PM	#226
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,831	Re: 1966 suburban slammed fuel injected 6.2L Also, what radiator cooler did you use? What are you using for your A/C compressor? __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

08-30-2013, 08:38 AM	#228
gostranger 65 suburban vortec 5.3 bagged Join Date: Jun 2005 Location: upstate new york Posts: 1,317	Re: 1966 suburban slammed fuel injected 6.2L hey any updates!?!

08-30-2013, 09:11 AM	#230
c.brown Registered User Join Date: Oct 2009 Location: harrison twp MI Posts: 292	Re: 1966 suburban slammed fuel injected 6.2L Ya finally fired my engine for the first time fired on the second try ,just have to adjust fuel pressure then should be good thanks for the interest guys Posted via Mobile Device __________________ 1966 suburban slammed fuel injected 6.2L My build

05-04-2014, 03:37 PM	#234
meltmetal Registered User Join Date: Jan 2007 Location: new york Posts: 61	Re: 1966 suburban slammed fuel injected 6.2L Awesome burb, any more progress on it?

05-04-2014, 06:05 PM	#235
Leroy-B1 Registered User Join Date: Dec 2010 Location: Mars Hill, NC Posts: 1,994	Re: 1966 suburban slammed fuel injected 6.2L Looking cool

05-05-2014, 05:39 AM	#236
gostranger 65 suburban vortec 5.3 bagged Join Date: Jun 2005 Location: upstate new york Posts: 1,317	Re: 1966 suburban slammed fuel injected 6.2L this thing should be getting close to being done! lets see some of the updates!!!

05-06-2014, 09:26 AM	#238
c.brown Registered User Join Date: Oct 2009 Location: harrison twp MI Posts: 292	Re: 1966 suburban slammed fuel injected 6.2L Drive shaft done,widened core support mouth for radiator and mocked up, Attached Images __________________ 1966 suburban slammed fuel injected 6.2L My build

05-08-2014, 05:48 AM	#239
gostranger 65 suburban vortec 5.3 bagged Join Date: Jun 2005 Location: upstate new york Posts: 1,317	Re: 1966 suburban slammed fuel injected 6.2L awesome work!!!! looks great!!!!

05-10-2014, 12:59 PM	#240
meltmetal Registered User Join Date: Jan 2007 Location: new york Posts: 61	Re: 1966 suburban slammed fuel injected 6.2L Glad to see you're still cipping away at it!

05-12-2014, 04:45 PM	#242
BB72CHEVKT Junior Member Join Date: Mar 2007 Location: Hideaway, TX Posts: 4,948	Re: 1966 suburban slammed fuel injected 6.2L Nice work. Your burb is going to be sweet! __________________ 71 Suburban 350/700R4 Project Trixie 72 CHEVY,Highlander,SWB,396,T400

05-15-2014, 09:23 PM	#244
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,831	Re: 1966 suburban slammed fuel injected 6.2L Looking good CB what exhaust kit are you using? __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

07-04-2014, 03:36 PM	#246
c.brown Registered User Join Date: Oct 2009 Location: harrison twp MI Posts: 292	Re: 1966 suburban slammed fuel injected 6.2L Here's a better look at how I ran the exhaust just have to make some hangers now Attached Images __________________ 1966 suburban slammed fuel injected 6.2L My build

07-04-2014, 03:47 PM	#247
c.brown Registered User Join Date: Oct 2009 Location: harrison twp MI Posts: 292	Re: 1966 suburban slammed fuel injected 6.2L Here's another pic of exhaust Attached Images __________________ 1966 suburban slammed fuel injected 6.2L My build

07-05-2014, 07:10 AM	#248
piratexpress1369a Registered User Join Date: Jun 2012 Location: Selkirk Ontario Canada Posts: 1,141	Re: 1966 suburban slammed fuel injected 6.2L that one hell of a bend on the header pipe ..is that the shifter linkage you had to go around __________________ My 63 GMC Panel Slow Build http://67-72chevytrucks.com/vboard/s...=1#post5457281 63

07-06-2014, 11:12 AM	#250
gostranger 65 suburban vortec 5.3 bagged Join Date: Jun 2005 Location: upstate new york Posts: 1,317	Re: 1966 suburban slammed fuel injected 6.2L my header has the same bend and it was for the truck!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.