ART StrongArms, $639/set - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jlaird · 03-12-2008, 08:37 PM

Quote:

Originally Posted by shifty

I do not have the tracking #. I've been told by two board vendors that they are drop-shipped direct from ART, and the operator at stylintrucks stated the same - she told me ahead of time that the arms will not ship from the stylintrucks warehouse.

yea, thats what I figured. Who wants overhead.

shifty · 03-13-2008, 11:53 PM

For anyone wondering -

The ART arms came in today. The box weighs nearly 100lbs, and is 24" x 24" x 24" in size, approximately.

So, IMHO, $65 is not an excessive amount for shipping.

And yes - the coupon above obviously works

03-14-2008, 07:15 AM

sweet! i'll be ordering a set soon.

slammed1 · 03-14-2008, 07:21 AM

Awesome deal shifty.

I sure was wrong in my thinking that such a large place would be drop shipping items like Stylin. I stand corrected. Maybe I should call about renting some of their empty warehouse space.LOL

gringoloco · 03-14-2008, 08:14 AM

Quote:

Originally Posted by shifty

For anyone wondering -

The ART arms came in today. The box weighs nearly 100lbs, and is 24" x 24" x 24" in size, approximately.

So, IMHO, $65 is not an excessive amount for shipping.

And yes - the coupon above obviously works

Gangster! Where's the mock-up pics? Get to work already

shifty · 03-14-2008, 08:44 AM

Man, I have way too much else to do. I got the rear of the frame taken care of, gotta weld in the notch, gotta finish welding up unnecessary holes which means I gotta mock up the drivetrain this weekend to figure out which of my tranny xmember holes I can delete, and then gotta decide what other holes I'll keep. You know, I'd hoped to have it coated already, figured that woulda been first to get done, but all these junkyard runs and parts runs and other BS have set me back!

The whole reason for tearing this thing down was to change the quick connect fitting on my T56! WHAT HAPPENED?!!

csbatey · 03-20-2008, 04:02 AM

hey i order mine with bags ,shock ,upper arm, lower arms 885 ship to my door what a deal. 999 without the discount thanks alot

shifty · 03-20-2008, 07:21 AM

Glad it helped someone out! Don't forget to post pictures once you get em installed!!

BigTex · 04-02-2008, 06:50 AM

Thanks Shifty. Just ordered the full coolride with upper and lower arms and a musclebar.

I can't decide if you saved me $260 or cost me $1100+???

jimmydean · 04-26-2008, 06:20 PM

Shifty,

If I order the 73+ arms, then I can just use the 73+ drop spindles for a set of 73+ brakes with my current crossmember, correct? Then all I need is the tie rod adapter to stick with the stock steering linkage until I go to the rack setup.

I will be using a dropmember once my motor is built, but I want to get the arms/discs/bags in now.

I used the cheater disc kit last time and paid way too much for ball joints and tie rod ends. I will convert the rear to 5 lug discs when I put the kp notches in.

abadsvt · 04-26-2008, 07:30 PM

Quote:

Originally Posted by jimmydean

Shifty,

If I order the 73+ arms, then I can just use the 73+ drop spindles for a set of 73+ brakes with my current crossmember, correct? Then all I need is the tie rod adapter to stick with the stock steering linkage until I go to the rack setup.

I will be using a dropmember once my motor is built, but I want to get the arms/discs/bags in now.

I used the cheater disc kit last time and paid way too much for ball joints and tie rod ends. I will convert the rear to 5 lug discs when I put the kp notches in.

Hey Jimmy! Did i miss something? You truck looks like it is raised not lowered. You were sitting pretty low to the ground. What happened? Tell me you didn't cross over to the other side.........

Josh

jimmydean · 04-26-2008, 08:00 PM

Quote:

Originally Posted by abadsvt

Hey Jimmy! Did i miss something? You truck looks like it is raised not lowered. You were sitting pretty low to the ground. What happened? Tell me you didn't cross over to the other side.........

Josh

I did, briefly. I bought a huge redneck truck that ended up being WAY more trouble than it was worth. I am currently working on a plan to build a '66 LWB.

I want to run a dropmember, but I won't be pulling the engine for at least a few months. My goal is to swap out the control arms, brakes, and install the bags. Then once my motor is done, pull the gasser, install the dropmember, then install a 6.2 turbo diesel.

I hope to start a build thread soon. The '66 will pick up where the '69 left off.

19stepSide72 · 08-01-2008, 11:17 PM

is this still good? any pics of items?

03-13-2008, 11:53 PM	#27
shifty Questionable Join Date: Mar 2005 Location: Atlanta Posts: 13,376	Re: ART StrongArms, $639/set For anyone wondering - The ART arms came in today. The box weighs nearly 100lbs, and is 24" x 24" x 24" in size, approximately. So, IMHO, $65 is not an excessive amount for shipping. And yes - the coupon above obviously works Attached Images __________________ If I've got anything up for grabs, it'll be here: 7-hole gauge cluster for a 67-72 p/u FREE (link) I can't check the forum daily. If I don't reply to you within 24 hours, drop me a PM! I'm (hopefully) still alive and will reply faster to a PM.

03-14-2008, 07:15 AM	#28
sddwtcb Guest Posts: n/a	Re: ART StrongArms, $639/set sweet! i'll be ordering a set soon.

03-14-2008, 07:21 AM	#29
slammed1 1972 Chevrolet SWB Join Date: Jan 2008 Location: FT Smith AR Posts: 512	Re: ART StrongArms, $639/set Awesome deal shifty. I sure was wrong in my thinking that such a large place would be drop shipping items like Stylin. I stand corrected. Maybe I should call about renting some of their empty warehouse space.LOL __________________ My New thread with pics (not my build thread yet.) http://67-72chevytrucks.com/vboard/s...46#post2573646 1972 Chevrolet 1/2 ton short wide bed,68 frt clip Project. 1980 Camaro Inherited when father passed,68K Miles 2003 Ford Mach1 FUN as Hell!! 2002 Dodge Ram 5-8 slam Rolling BillBoard (Gone not forgot) 2004 Dodge Ram HEMI 10" lifted on 37's and 2wd.

03-14-2008, 08:44 AM	#31
shifty Questionable Join Date: Mar 2005 Location: Atlanta Posts: 13,376	Re: ART StrongArms, $639/set Man, I have way too much else to do. I got the rear of the frame taken care of, gotta weld in the notch, gotta finish welding up unnecessary holes which means I gotta mock up the drivetrain this weekend to figure out which of my tranny xmember holes I can delete, and then gotta decide what other holes I'll keep. You know, I'd hoped to have it coated already, figured that woulda been first to get done, but all these junkyard runs and parts runs and other BS have set me back! The whole reason for tearing this thing down was to change the quick connect fitting on my T56! WHAT HAPPENED?!! __________________ If I've got anything up for grabs, it'll be here: 7-hole gauge cluster for a 67-72 p/u FREE (link) I can't check the forum daily. If I don't reply to you within 24 hours, drop me a PM! I'm (hopefully) still alive and will reply faster to a PM.

03-20-2008, 04:02 AM	#32
csbatey Registered User Join Date: Dec 2006 Location: nash,TN Posts: 218	Re: ART StrongArms, $639/set hey i order mine with bags ,shock ,upper arm, lower arms 885 ship to my door what a deal. 999 without the discount thanks alot

03-20-2008, 07:21 AM	#33
shifty Questionable Join Date: Mar 2005 Location: Atlanta Posts: 13,376	Re: ART StrongArms, $639/set Glad it helped someone out! Don't forget to post pictures once you get em installed!! __________________ If I've got anything up for grabs, it'll be here: 7-hole gauge cluster for a 67-72 p/u FREE (link) I can't check the forum daily. If I don't reply to you within 24 hours, drop me a PM! I'm (hopefully) still alive and will reply faster to a PM.

04-02-2008, 06:50 AM	#34
BigTex Registered User Join Date: Nov 2006 Location: DFW area Posts: 104	Re: ART StrongArms, $639/set Thanks Shifty. Just ordered the full coolride with upper and lower arms and a musclebar. I can't decide if you saved me $260 or cost me $1100+??? __________________ Richard 1970 Chevy (growing pile of parts) 2003 Silverado SS

04-26-2008, 06:20 PM	#35
jimmydean Registered User Join Date: May 2005 Location: Beaverton, OR Posts: 3,728	Re: ART StrongArms, $639/set Shifty, If I order the 73+ arms, then I can just use the 73+ drop spindles for a set of 73+ brakes with my current crossmember, correct? Then all I need is the tie rod adapter to stick with the stock steering linkage until I go to the rack setup. I will be using a dropmember once my motor is built, but I want to get the arms/discs/bags in now. I used the cheater disc kit last time and paid way too much for ball joints and tie rod ends. I will convert the rear to 5 lug discs when I put the kp notches in. __________________ New Project: 1966 LWB C20 Plans: 1/2 ton conversion Dropmember front Dropmember rear Corvette discs Restored raised bed http://67-72chevytrucks.com/vboard/s....php?p=4295210

08-01-2008, 11:17 PM	#38
19stepSide72 wanna be 67 Join Date: May 2007 Location: Nor Cal Posts: 696	Re: ART StrongArms, $639/set is this still good? any pics of items?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.