Lets see some 1960 - 1966 engine bays - Page 15 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

65Robb · 07-13-2016, 09:31 AM

New engine I swapped in this past winter old 350 would go thru a quart of oil every 60 miles lol

Bart Savage · 07-16-2016, 12:49 AM

2004 5.3 Vortec

Northwest Outlaw · 07-18-2016, 01:53 PM

progress photo

Wingnut Way · 07-21-2016, 12:26 PM

riverlos · 07-24-2016, 07:26 PM

66 c10

C40 · 07-25-2016, 07:28 PM

In a 1962 6 cylinder engine. Is the OEM air cleaner oil bath?
Posted via Mobile Device

RANDY COX · 07-25-2016, 09:00 PM

Here's mine 64 4x4 4 spd, 402 BBC

maydaymike · 07-25-2016, 10:33 PM

Quote:

Originally Posted by maydaymike

This is my '66 with a 250. I've been cleaning and painting the engine a little at a time. I know it's supposed to be blue, but I like the orange better dammit! Right side and the valve cover looks pretty good now. I still have the front and left side to do. The oil pan will be painted off the truck when I drop it to change the gasket. For all the history buffs, note the original fawn paint showing on the firewall of this Atlanta built truck. Body color is 510 turquoise.

I finished the other side of mine, and put it back together with fresh gaskets and belts,hoses, thermostat, etc. Still have to drop the oil pan to re-gasket and paint, and replace the motor mounts. I intend to repaint the mount towers at that time.

**Palf70Step** · 07-26-2016, 05:17 AM

Quote:

Originally Posted by C40

In a 1962 6 cylinder engine. Is the OEM air cleaner oil bath?
Posted via Mobile Device

Welcome to the board. I believe that is correct for the 6 cylinder air cleaner. Hopefully some others may add to this or you can repost your question within the main board area.

62stepside longbox · 07-26-2016, 12:30 PM

Quote:

Originally Posted by C40

In a 1962 6 cylinder engine. Is the OEM air cleaner oil bath?
Posted via Mobile Device

Yep, in 62 the only two six cylinders that were available in chevy trucks were the 235 and 261, they both came equipped with oil bath air cleaners

C40 · 07-26-2016, 03:08 PM

Quote:

Originally Posted by Palf70Step

Welcome to the board. I believe that is correct for the 6 cylinder air cleaner. Hopefully some others may add to this or you can repost your question within the main board area.

Thank you very much
Posted via Mobile Device

phraza · 07-28-2016, 04:07 AM

When I first got it:

Needs a bit of elbow grease to get it clean. I have a few goodies to go on soon too

par4tom · 07-29-2016, 01:05 AM

Old school SBC 383

par4tom · 07-29-2016, 01:10 AM

Another angle...

62stepside longbox · 07-29-2016, 01:23 AM

Wow Tom that is one clean engine bay, looks like you could eat off of it

**contagious102** · 07-29-2016, 12:03 PM

My 66 , 540CI .

phraza · 11-14-2016, 08:47 PM

Recent: new rocker covers, air filter, leads, plugs, radiator shroud. Still a few more things on my list to clean it up (mainly hoses and radiator)

65ny · 11-14-2016, 08:57 PM

235, HEI, dual webers, and split manifold.

**TJ's Chevy** · 01-07-2017, 12:37 AM

Time for another bump.

This 292 is eagerly awaiting an engine bay. Some basics, lump ported head, shaved, bigger valves, bbc roller rockers, comp cam 268H, .040 over bore with ross racing forged aluminum pistons, 625 CFM Demon carb, cliford intake and headers. Engine backed by a TKO600. Coulda done the ol 350, but this looks WAY better and will perform like a champ to.

1st pic is before and the other 2 are after. Pulled this out of a 64 Chevy and it's for my 66.

**TJ's Chevy** · 01-07-2017, 12:41 AM

Not quite as perrty as the one above, but this is my 305E V6 in my 64 GMC. Did a heavy low end service and reseal. Also a repaint. Detroit diesel green.

600 cfm eddy and true dual exhaust. Sounds sweet with flowmaster 40's. Wouldn't trade that 305 for anything except a bigger big block v6.

62 Barnfind · 01-07-2017, 11:14 AM

62 with 235

forestb · 01-09-2017, 12:43 PM

Here is mine.

Northwest Outlaw · 01-09-2017, 02:23 PM

Got her installed, all dressed up and even started!
Install Video: https://youtu.be/61QrMdg9BKE
Start up Video: https://youtu.be/txtKBJ_lQXc

ssupraman63 · 01-09-2017, 10:44 PM

the day I found it

'63GENIII · 01-10-2017, 01:21 AM

Lots of tough acts to follow here! My '63 K15 with a Vortec 7.4. Pics don't do it justice. It really does look worse in person! Haha!

07-13-2016, 09:31 AM	#351
65Robb Registered User Join Date: Jul 2016 Location: Gooding,Idaho Posts: 158	Re: Lets see some 1960 - 1966 engine bays New engine I swapped in this past winter old 350 would go thru a quart of oil every 60 miles lol Attached Images

07-16-2016, 12:49 AM	#352
Bart Savage Registered User Join Date: Oct 2013 Location: Nor-Cal Posts: 86	Re: Lets see some 1960 - 1966 engine bays 2004 5.3 Vortec Last edited by Bart Savage; 07-16-2016 at 12:56 AM.

07-18-2016, 01:53 PM	#353
Northwest Outlaw Registered User Join Date: Jul 2015 Location: Seattle Posts: 228	Re: Lets see some 1960 - 1966 engine bays progress photo Attached Images __________________ 1961 Chevy Apache "BoomStick" -First build, lots of plans, little experience. What's the worst that could happen? http://67-72chevytrucks.com/vboard/s...d.php?t=694506

07-21-2016, 12:26 PM	#354
Wingnut Way Registered User Join Date: Jun 2015 Location: Windfield Missouri Posts: 99	Re: Lets see some 1960 - 1966 engine bays Attached Images

07-24-2016, 07:26 PM	#355
riverlos Registered User Join Date: Jun 2016 Location: Montclair,California Posts: 2	Re: Lets see some 1960 - 1966 engine bays 66 c10 Attached Images

07-25-2016, 07:28 PM	#356
C40 Registered User Join Date: Jul 2016 Location: Las Vegas NV Posts: 24	Re: Lets see some 1960 - 1966 engine bays In a 1962 6 cylinder engine. Is the OEM air cleaner oil bath? Posted via Mobile Device

07-25-2016, 09:00 PM	#357
RANDY COX Registered User Join Date: Mar 2001 Location: RADFORD, VA Posts: 2,651	Re: Lets see some 1960 - 1966 engine bays Here's mine 64 4x4 4 spd, 402 BBC __________________ 1964 BBC 402 4x4

07-28-2016, 04:07 AM	#362
phraza Registered User Join Date: Jun 2016 Location: Auckland, New Zealand Posts: 146	Re: Lets see some 1960 - 1966 engine bays When I first got it: Needs a bit of elbow grease to get it clean. I have a few goodies to go on soon too __________________ Fraser - New Zealand 1964 Chevy C10 Stepside 350 V8 Build thread here

07-29-2016, 01:05 AM	#363
par4tom Registered User Join Date: Nov 2012 Location: Kingsburg CA Posts: 581	Re: Lets see some 1960 - 1966 engine bays Old school SBC 383 Attached Images __________________ My Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=705185 How to Get Audiophile Sound in 60-66 Trucks http://67-72chevytrucks.com/vboard/s...=1#post7236896 Building Your Own Speaker Kick Pods http://http://67-72chevytrucks.com/vboard/showthread.php?t=730495

07-29-2016, 01:10 AM	#364
par4tom Registered User Join Date: Nov 2012 Location: Kingsburg CA Posts: 581	Re: Lets see some 1960 - 1966 engine bays Another angle... Attached Images __________________ My Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=705185 How to Get Audiophile Sound in 60-66 Trucks http://67-72chevytrucks.com/vboard/s...=1#post7236896 Building Your Own Speaker Kick Pods http://http://67-72chevytrucks.com/vboard/showthread.php?t=730495

07-29-2016, 01:23 AM	#365
62stepside longbox Registered User Join Date: Aug 2015 Location: Kelowna, B.C, Canada Posts: 1,747	Re: Lets see some 1960 - 1966 engine bays Wow Tom that is one clean engine bay, looks like you could eat off of it __________________ Nik...................____ 62 lwb c10 step-side 261 5 spd .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ my build thread. Sending unit solution

07-29-2016, 12:03 PM	#366
contagious102 Senior Member Join Date: May 2012 Location: Semmes,Al. Posts: 407	Re: Lets see some 1960 - 1966 engine bays My 66 , 540CI . __________________ Go Fast and Have Fun.!! My pro street build, http://67-72chevytrucks.com/vboard/s...d.php?t=551185

11-14-2016, 08:47 PM	#367
phraza Registered User Join Date: Jun 2016 Location: Auckland, New Zealand Posts: 146	Re: Lets see some 1960 - 1966 engine bays Recent: new rocker covers, air filter, leads, plugs, radiator shroud. Still a few more things on my list to clean it up (mainly hoses and radiator) __________________ Fraser - New Zealand 1964 Chevy C10 Stepside 350 V8 Build thread here

11-14-2016, 08:57 PM	#368
65ny Registered User Join Date: Jan 2016 Location: Norman, Ok Posts: 8	Re: Lets see some 1960 - 1966 engine bays 235, HEI, dual webers, and split manifold. Attached Images

01-07-2017, 12:37 AM	#369
TJ's Chevy Post Whore Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: Lets see some 1960 - 1966 engine bays Time for another bump. This 292 is eagerly awaiting an engine bay. Some basics, lump ported head, shaved, bigger valves, bbc roller rockers, comp cam 268H, .040 over bore with ross racing forged aluminum pistons, 625 CFM Demon carb, cliford intake and headers. Engine backed by a TKO600. Coulda done the ol 350, but this looks WAY better and will perform like a champ to. 1st pic is before and the other 2 are after. Pulled this out of a 64 Chevy and it's for my 66. Attached Images __________________ 1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw



Register or Log In To remove these advertisements.

01-07-2017, 12:41 AM	#370
TJ's Chevy Post Whore Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: Lets see some 1960 - 1966 engine bays Not quite as perrty as the one above, but this is my 305E V6 in my 64 GMC. Did a heavy low end service and reseal. Also a repaint. Detroit diesel green. 600 cfm eddy and true dual exhaust. Sounds sweet with flowmaster 40's. Wouldn't trade that 305 for anything except a bigger big block v6. Attached Images __________________ 1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw

01-07-2017, 11:14 AM	#371
62 Barnfind Registered User Join Date: Jan 2012 Location: Killeen, Tx Posts: 1,351	Re: Lets see some 1960 - 1966 engine bays 62 with 235 __________________ John Z 1962 Chevy C10 Stepside 62 Barnfind My build tread: http://67-72chevytrucks.com/vboard/s...d.php?t=507513

01-09-2017, 12:43 PM	#372
forestb Registered User Join Date: Jan 2009 Location: Burbank, CA Posts: 3,584	Re: Lets see some 1960 - 1966 engine bays Here is mine. Attached Images

01-09-2017, 02:23 PM	#373
Northwest Outlaw Registered User Join Date: Jul 2015 Location: Seattle Posts: 228	Re: Lets see some 1960 - 1966 engine bays Got her installed, all dressed up and even started! Install Video: https://youtu.be/61QrMdg9BKE Start up Video: https://youtu.be/txtKBJ_lQXc Attached Images __________________ 1961 Chevy Apache "BoomStick" -First build, lots of plans, little experience. What's the worst that could happen? http://67-72chevytrucks.com/vboard/s...d.php?t=694506

01-09-2017, 10:44 PM	#374
ssupraman63 Registered User Join Date: Dec 2016 Location: ingleside texas Posts: 12	Re: Lets see some 1960 - 1966 engine bays the day I found it Attached Images

01-10-2017, 01:21 AM	#375
'63GENIII Registered User Join Date: Sep 2008 Location: San Carlos, Ca. Posts: 3,048	Re: Lets see some 1960 - 1966 engine bays Lots of tough acts to follow here! My '63 K15 with a Vortec 7.4. Pics don't do it justice. It really does look worse in person! Haha! Attached Images __________________ Chris '63 k15 long step Vortec 7.4 - L29 Blackbear tune, Five 0 Motorsports injectors, Chris Straub Cam, NV4500, divorced 205 52" front and 63" rear spring swap D44 / 14bff - disc axles Milemarker 9K and 10.5K hydraulic winches 63" & B52 Spring Install http://67-72chevytrucks.com/vboard/s...ng+swap+thread NV4500 Reverse Build Thread http://67-72chevytrucks.com/vboard/s...=reverse+build L29 - 7.4 Vortec Build http://67-72chevytrucks.com/vboard/s...&highlight=L29

Register or Log In To remove these advertisements.