AR WTB- Coy Wheel center cap spacers - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**lolife99** · 05-30-2010, 10:17 PM

Quote:

Originally Posted by Zoomin

Would it be possible to get some 1/8" or 3/16"? The 1/4" is a bit thick. I'll buy another set and be the guinea pig for them.

I'm out of material.
I'm sure someone sells it though.
I donated all the material (so far),... for shipping costs alone.
($12.00)

Zoomin · 05-30-2010, 10:42 PM

Quote:

Originally Posted by lolife99

I'm out of material.
I'm sure someone sells it though.
I donated all the material (so far),... for shipping costs alone.
($12.00)

Got paypal? I'll chip in for the cause.

**lolife99** · 05-30-2010, 11:14 PM

Quote:

Originally Posted by Zoomin

Got paypal? I'll chip in for the cause.

No need.
I'm just glad Mike stepped up to do the machine work.
If you want to chip in,... send some money Mike's direction.
He's the one doing all the work.

Zoomin · 05-30-2010, 11:22 PM

Already did. I aapreciate all the effort guys!

mcbassin · 05-31-2010, 12:03 AM

Quote:

Originally Posted by Zoomin

Would it be possible to get some 1/8" or 3/16"? The 1/4" is a bit thick. I'll buy another set and be the guinea pig for them.

I might have some 1/8" scrap to cut and let you try. I will look when I get back to work on Tuesday. If not it should be pretty cheap for a small sample.

You guys are all welcome for this project!
It's really not too bad once the programming, setup and fixture was made. Then it's just load and go. I hope to get some video next run.

big_al_71 · 05-31-2010, 03:31 PM

I installed the spacers a little while ago. It is incredible that you cant tell they are there unless you know about it, they look like they belong...

**lolife99** · 05-31-2010, 04:09 PM

Where's everyone getting the longer screws to bolt these center caps on?

bigarmzz · 05-31-2010, 06:21 PM

Quote:

Originally Posted by lolife99

Where's everyone getting the longer screws to bolt these center caps on?

i've been wandering the same thing

big_al_71 · 05-31-2010, 07:26 PM

Quote:

Originally Posted by lolife99

Where's everyone getting the longer screws to bolt these center caps on?

Quote:

Originally Posted by bigarmzz

i've been wandering the same thing

I went to ACE Hardware store about a mile or two from my house. they are stainless also lowes has them.

mcbassin · 05-31-2010, 11:26 PM

Quote:

Originally Posted by big_al_71

I went to ACE Hardware store about a mile or two from my house. they are stainless also lowes has them.

Do you remember exacly what length and size you purchased? could you post it up on here? Yes Lowes and Ace hardware should have the stainless flat head screws. If not you can get them real quick online mcmaster carr.

BTW,
your wheels look great with the spacers, thanks for the pictures!

big_al_71 · 06-01-2010, 10:37 AM

Quote:

Originally Posted by mcbassin

Do you remember exacly what length and size you purchased? could you post it up on here? Yes Lowes and Ace hardware should have the stainless flat head screws. If not you can get them real quick online mcmaster carr.

BTW,
your wheels look great with the spacers, thanks for the pictures!

Thanks Mike
I just looked at the receipt and it does not indicate the size but what I did was I took the cap and the spacer with me along with one of the oridignal screws, I looked at how much the original screw came out of the cap I then put the spacer behind it and got a screw that stuck out just as much with both of them together. I will go by ACE on my way home and look at the box where they were and share it with everyone to make it easier sibnce I already know it worked...

stay tuned for later tonight....

big_al_71 · 06-01-2010, 07:08 PM

Here is a pict of the actual screw and the size that I used I am 99.9% sure of the size..

mcbassin · 06-01-2010, 11:18 PM

Quote:

Originally Posted by big_al_71

Here is a pict of the actual screw and the size that I used I am 99.9% sure of the size..

Well there you go! 10-32 X 3/4" long. I would recommend the socket head style. Thanks big-al

big_al_71 · 06-01-2010, 11:52 PM

Quote:

Originally Posted by mcbassin

Well there you go! 10-32 X 3/4" long. I would recommend the socket head style. Thanks big-al

No problem!!! Thank you for making these for me......

mcbassin · 06-04-2010, 12:08 PM

I have another 5 pairs ready to go if anyone didn't get their order in last run.

RocketKing · 06-09-2010, 04:26 PM

I will take a pair if you don't mind.

mcbassin · 06-10-2010, 12:14 AM

Quote:

Originally Posted by RocketKing

I will take a pair if you don't mind.

PM sent

mcbassin · 06-10-2010, 07:29 PM

shipping in the morning Rocket

RocketKing · 06-10-2010, 10:41 PM

Quote:

Originally Posted by mcbassin

shipping in the morning Rocket

Thanks for the quick turn around

srob67 · 03-03-2011, 03:40 PM

Is anyone still making these spacers? I'm in need of a set really bad!!

**lolife99** · 03-03-2011, 04:08 PM

Quote:

Originally Posted by srob67

Is anyone still making these spacers? I'm in need of a set really bad!!

Did you PM mcbassin?

srob67 · 03-03-2011, 04:38 PM

Yes. He is sending the cad file.

Thanks

mcbassin · 03-03-2011, 06:07 PM

Quote:

Originally Posted by srob67

Yes. He is sending the cad file.

Thanks

I am? Sorry, I'm confused? Steve, you need the cad file or some parts? I would share the cad file. But, I would rather make some more of these. It seems there are a few folks that want/need some. I like to help guys out. It may require changing my subscription again?

srob67 · 03-03-2011, 10:17 PM

Mcbassin,
Sorry for the confusion. Someone else sent me a pm saying they could send the cad file. I don't have access to a waterjet or laser, but was going to try and find someone local that did have.
I would rather have some pre-made and buy them. If you are going to be making some, please put me in line for a set.

erikgto · 03-07-2011, 03:51 PM

Hi Guys,

I'd like to buy a set of these spacers.
Just let me know how the get hold of a set!

Can't use a file cause I have no way of machining them.

Thanks!!
erik

05-30-2010, 11:22 PM	#104
Zoomin Man of Mini-Talents Join Date: Sep 2009 Location: Oklahoma City, OK Posts: 4,295	Re: WTB- Coy Wheel center cap spacers Already did. I aapreciate all the effort guys!

05-31-2010, 03:31 PM	#106
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: WTB- Coy Wheel center cap spacers I installed the spacers a little while ago. It is incredible that you cant tell they are there unless you know about it, they look like they belong... Attached Images __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

05-31-2010, 04:09 PM	#107
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,684	Re: WTB- Coy Wheel center cap spacers Where's everyone getting the longer screws to bolt these center caps on? __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

06-01-2010, 07:08 PM	#112
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: WTB- Coy Wheel center cap spacers Here is a pict of the actual screw and the size that I used I am 99.9% sure of the size.. Attached Images __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

06-04-2010, 12:08 PM	#115
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: WTB- Coy Wheel center cap spacers I have another 5 pairs ready to go if anyone didn't get their order in last run. __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

06-09-2010, 04:26 PM	#116
RocketKing Registered User Join Date: Dec 2008 Location: Berryville, AR Posts: 792	Re: WTB- Coy Wheel center cap spacers I will take a pair if you don't mind. __________________ Rex

06-10-2010, 07:29 PM	#118
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: WTB- Coy Wheel center cap spacers shipping in the morning Rocket __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

03-03-2011, 03:40 PM	#120
srob67 Registered User Join Date: Jun 2009 Location: KY Posts: 99	Re: WTB- Coy Wheel center cap spacers Is anyone still making these spacers? I'm in need of a set really bad!!

03-03-2011, 04:38 PM	#122
srob67 Registered User Join Date: Jun 2009 Location: KY Posts: 99	Re: WTB- Coy Wheel center cap spacers Yes. He is sending the cad file. Thanks

03-03-2011, 10:17 PM	#124
srob67 Registered User Join Date: Jun 2009 Location: KY Posts: 99	Re: WTB- Coy Wheel center cap spacers Mcbassin, Sorry for the confusion. Someone else sent me a pm saying they could send the cad file. I don't have access to a waterjet or laser, but was going to try and find someone local that did have. I would rather have some pre-made and buy them. If you are going to be making some, please put me in line for a set.

03-07-2011, 03:51 PM	#125
erikgto Registered User Join Date: May 2007 Location: The Netherlands Posts: 185	Re: WTB- Coy Wheel center cap spacers Hi Guys, I'd like to buy a set of these spacers. Just let me know how the get hold of a set! Can't use a file cause I have no way of machining them. Thanks!! erik __________________ 1972 GMC 2500 Sierra 350 1971 Pontiac LeMans Sport 400 GTO/Judge Clone 1970 Pontiac GTO 400 convertible restoproject 1970 Pontiac Bonneville 455 convertible



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.