1974 C10 on Body Coddington's site - The 1947 - Present Chevrolet & GMC Truck Message Board Network

75stepside · 11-13-2006, 10:02 PM

http://www.boydsshop.com/Pages/0206_..._Chevy_PU.html

i remember seeing pix of when this truck was being built... a great truck... very clean and smooth! shocked its for sale!

wklink · 11-13-2006, 10:46 PM

Except for those guages (they just don't look right in that truck to me) I love what he did. It is clean and understated.

pcmcobra · 11-13-2006, 10:48 PM

I like the dash, smaller gauges would look better to me.

mySAVIOReigns · 11-13-2006, 10:58 PM

I agree, those gauges look really tacky - I bet when you're driving they're difficult to see because of the downward tilt.

**N2TRUX** · 11-13-2006, 11:41 PM

That truck was built by and for Todd a forum member here. It may not be exactly to your liking but it is a very well built truck.

pcmcobra · 11-14-2006, 12:10 AM

I do love the interior, looks like they leather wrapped the dash.
*****in

84 400 · 11-14-2006, 12:47 AM

sweet! gaudges is the only change i would make they kinda give it a off the shelf look but everything else is class a great stock lines smooth and fast looking nice wood bed too.

87 STEPPER · 11-14-2006, 07:36 AM

Two things i dont like that jumped out at me right away the insturments and that hidious red & black plaid interoir material.

And i think i would of left the window switches on the door panels instead of mounting them on the rear of the shifter housing.

It looks like it would be a little aukward to have to reach over that far to put the window up & down.

Other than that it looks like a very nice truck.

Grande Rojo · 11-14-2006, 09:35 AM

I like everything about that truck

75silverstep · 11-14-2006, 07:58 PM

I like it ..Those gauges come all togeather with the bezel..I put mine in with the billet .Ya they face down alil but how often do you look at them.HAHA...

boatpuller · 11-14-2006, 08:37 PM

man.. i like it too..i'd take it without any gauges.

Bad71chev406sbc · 11-15-2006, 01:09 AM

Saw this thing at SEMA '04...was in love with it....I had completely forgotten that it was a Boyd truck.

**Captkaos** · 11-15-2006, 06:29 PM

If you don't like those guages, you won't like what Convan's is offering for these trucks. Unless he changed it, his dash is factory.

hiway · 11-15-2006, 08:59 PM

Nice work for sure. Mexico trucks had wood in the fleet sides right? Even chains for the tailgate. I really like the clean overall look.

tom coop · 11-15-2006, 09:12 PM

i like the truck, even the guages. id have to stay away from the plaid. and i agree, horrible placement of the window switches.

sixtysevengmc · 11-15-2006, 09:27 PM

andrist1 · 11-16-2006, 07:50 PM

I don't mind the gauges, I think they look pretty sweet. I like the carbon fiber dash bezel, but they need to make a carbon fiber insert for the dash. Maybe they do? I haven't seen one................

11-13-2006, 10:02 PM	#1
75stepside Proud Member Join Date: Nov 2002 Location: Pittsburgh, PA Posts: 741	1974 C10 on Body Coddington's site http://www.boydsshop.com/Pages/0206_..._Chevy_PU.html i remember seeing pix of when this truck was being built... a great truck... very clean and smooth! shocked its for sale!

11-13-2006, 10:46 PM	#2
wklink Junior Member Join Date: Sep 2006 Location: Olympia, WA Posts: 122	Re: 1974 C10 on Body Coddington's site Except for those guages (they just don't look right in that truck to me) I love what he did. It is clean and understated. __________________ I let my 16 year old son drive my every car that I own. I don't let him drive my truck. A man has to draw a line somewhere.

11-13-2006, 10:48 PM	#3
pcmcobra Registered User Join Date: Aug 2006 Location: Florida Posts: 1,684	Re: 1974 C10 on Body Coddington's site I like the dash, smaller gauges would look better to me.

11-13-2006, 10:58 PM	#4
mySAVIOReigns Active Member Join Date: Mar 2006 Location: Arlington, TX Posts: 111	Re: 1974 C10 on Body Coddington's site I agree, those gauges look really tacky - I bet when you're driving they're difficult to see because of the downward tilt. __________________ Website Here -Stephen 1985 Chevy Silverado, 1/2 ton

11-13-2006, 11:41 PM	#5
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,023	Re: 1974 C10 on Body Coddington's site That truck was built by and for Todd a forum member here. It may not be exactly to your liking but it is a very well built truck. __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

11-14-2006, 12:10 AM	#6
pcmcobra Registered User Join Date: Aug 2006 Location: Florida Posts: 1,684	Re: 1974 C10 on Body Coddington's site I do love the interior, looks like they leather wrapped the dash. *****in

11-14-2006, 12:47 AM	#7
84 400 Sb 400 club Join Date: Nov 2005 Location: NH / MA Posts: 2,741	Re: 1974 C10 on Body Coddington's site sweet! gaudges is the only change i would make they kinda give it a off the shelf look but everything else is class a great stock lines smooth and fast looking nice wood bed too. __________________ 1984 chevy c10, built 400sb,.(SOLD) 77 K10 Project / daily driver "The Grinch" http://67-72chevytrucks.com/vboard/s...d.php?t=318363 1956 Willys Wagon (327 chevy) Project (Now Buick 225) 1980 Corvette L-48 4 speed 1992 Mustang GT built 5.0 5 speed 1985 C10 LWB Sold 1982 K10 SWB plow truck Parted out 1986 D30 M1028 fire brush truck Parted out

11-14-2006, 07:36 AM	#8
87 STEPPER STILL PLAYS WITH TRUX Join Date: Nov 2002 Location: Melbourne, Fla. Posts: 2,764	Re: 1974 C10 on Body Coddington's site Two things i dont like that jumped out at me right away the insturments and that hidious red & black plaid interoir material. And i think i would of left the window switches on the door panels instead of mounting them on the rear of the shifter housing. It looks like it would be a little aukward to have to reach over that far to put the window up & down. Other than that it looks like a very nice truck. __________________ ~~Bruce~~ MY 87 STEPPER MY 99 2D/WD TAHOE Last edited by 87 STEPPER; 11-16-2006 at 06:48 AM.

11-14-2006, 09:35 AM	#9
Grande Rojo paper or plastic? Join Date: Nov 2002 Location: SW Missouri Posts: 671	Re: 1974 C10 on Body Coddington's site I like everything about that truck __________________ 1967 Chevy SWB 250 http://67-72chevytrucks.com/vboard/s...d.php?t=442157 1977 Chevy SWB 454 No More 454 getting 5.3 http://67-72chevytrucks.com/vboard/s...d.php?t=310518 1977 Stepside Truck of the month winner http://67-72chevytrucks.com/vboard/s...d.php?t=135524 1965 Chevy C10 454 http://67-72chevytrucks.com/vboard/s...d.php?t=731372 1975 Dodge Power Wagon http://67-72chevytrucks.com/vboard/s...=1#post7871388

11-14-2006, 07:58 PM	#10
75silverstep KEEP ON TRUCKIN. Join Date: Sep 2005 Location: TULARE,CALIFORNIA Posts: 604	Re: 1974 C10 on Body Coddington's site I like it ..Those gauges come all togeather with the bezel..I put mine in with the billet .Ya they face down alil but how often do you look at them.HAHA... __________________ 1975 C-10 STEPSIDE (ALMOST DONE AGAIN)90 percent done wheres that other 10 haha .1994 GMC Z71 .

11-14-2006, 08:37 PM	#11
boatpuller Registered User Join Date: Sep 2005 Location: Sun City West, Az Posts: 3,822	Re: 1974 C10 on Body Coddington's site man.. i like it too..i'd take it without any gauges.

11-15-2006, 01:09 AM	#12
Bad71chev406sbc Registered User Join Date: Nov 2006 Location: Boring, Oregon Posts: 162	Re: 1974 C10 on Body Coddington's site Saw this thing at SEMA '04...was in love with it....I had completely forgotten that it was a Boyd truck. __________________ '71 SNB, 406sbc, TH350 w/ Transpak & Starshifter, 12bolt w/ 3.73s, 2" Early Classic front coils, 2.5" Flowmaster Super 40's

11-15-2006, 06:29 PM	#13
Captkaos www.73-87chevytrucks.com Join Date: Dec 1999 Location: Birmingham, AL Posts: 6,935	Re: 1974 C10 on Body Coddington's site If you don't like those guages, you won't like what Convan's is offering for these trucks. Unless he changed it, his dash is factory. __________________ Chris Lucas 1973 Chevy C-10 1978 GMC Jimmy (2WD) - SOLD 1987 R10 twin turbo LS 1991 R3500 SRW CrewCab 1985 K5 diesel swapped project 1989 K5 2WD conversion w/ Vette susp Project Captkaos Customs 73-87chevytrucks.com

11-15-2006, 08:59 PM	#14
hiway Mad Scientist Join Date: Jul 2005 Location: Enola Arkansas Posts: 380	Re: 1974 C10 on Body Coddington's site Nice work for sure. Mexico trucks had wood in the fleet sides right? Even chains for the tailgate. I really like the clean overall look. __________________ Everythang relates to Beer! 86 1/2ton on tons! sbc/465/208/D60/14/35's 81 Postal....with 468 bbc 97 Merc Marq comuter 07 Suburban 02 Danger Ranger

11-15-2006, 09:12 PM	#15
tom coop Registered User Join Date: Nov 2006 Location: memphis Posts: 98	Re: 1974 C10 on Body Coddington's site i like the truck, even the guages. id have to stay away from the plaid. and i agree, horrible placement of the window switches.



Register or Log In To remove these advertisements.

11-15-2006, 09:27 PM	#16
sixtysevengmc village idiot Join Date: Oct 2006 Location: Barbourville,KY Posts: 178	Re: 1974 C10 on Body Coddington's site

11-16-2006, 07:50 PM	#17
andrist1 Registered User Join Date: Nov 2006 Location: Snohomish, Washington Posts: 88	Re: 1974 C10 on Body Coddington's site I don't mind the gauges, I think they look pretty sweet. I like the carbon fiber dash bezel, but they need to make a carbon fiber insert for the dash. Maybe they do? I haven't seen one................

Register or Log In To remove these advertisements.