350 TBI engine in so. NJ- $400 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**crossy** · 07-02-2007, 10:27 AM

350 TBI runs very well and reasonably maintained. has 104K and makes no noises and only the slightest puff of smoke on some start ups. clean and does not appear to be a leaker.$400
Has the desireable Serpentine belt set-up already on the front.

5 minutes from Delaware Memorial Bridge. At end (bottom) of NJ turnpike, ALSO Routes 130 ,49, 40 and 295 all end in Pennsville, so easy to get to.
thanx , crossy

vtblazer · 07-06-2007, 06:39 AM

Just the engine, right?

No TBI hardware with it?

**crossy** · 07-06-2007, 01:09 PM

I CAN, and will, provide all of that stuff if you are loooking to do a conversion. I already have a complete TBI wiring set up off that is labeled. you'll have to call me to discuss that. Minimal $ if you buy the engine. thanx , crossy

**crossy** · 07-19-2007, 05:59 PM

added info to the ad. thanx.

07-02-2007, 10:27 AM	#1
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,039	350 TBI engine in so. NJ- $400 350 TBI runs very well and reasonably maintained. has 104K and makes no noises and only the slightest puff of smoke on some start ups. clean and does not appear to be a leaker.$400 Has the desireable Serpentine belt set-up already on the front. 5 minutes from Delaware Memorial Bridge. At end (bottom) of NJ turnpike, ALSO Routes 130 ,49, 40 and 295 all end in Pennsville, so easy to get to. thanx , crossy __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks. Last edited by crossy; 08-12-2007 at 11:00 AM.

07-06-2007, 06:39 AM	#2
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,538	Re: 350 TBI engine in so. NJ- $400 Just the engine, right? No TBI hardware with it?

07-06-2007, 01:09 PM	#3
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,039	Re: 350 TBI engine in so. NJ- $400 I CAN, and will, provide all of that stuff if you are loooking to do a conversion. I already have a complete TBI wiring set up off that is labeled. you'll have to call me to discuss that. Minimal $ if you buy the engine. thanx , crossy __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks.

07-19-2007, 05:59 PM	#4
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,039	Re: 350 TBI engine in so. NJ- $400 added info to the ad. thanx. __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.