Research help needed - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jb4short · 08-25-2009, 11:50 AM

Please E-MAIL me items that don't seem to be reproduced for the '69-'72 Blazers.

E-Mail to jon@tri-proautomotive.com

Thanks in advance!

msgross · 08-25-2009, 12:04 PM

entire tubs

14U2NV · 08-25-2009, 12:21 PM

I sent you an e-mail

Chad

smokekiki · 08-25-2009, 12:23 PM

The strips that hold the weather stripping for around the tailgate.

jb4short · 08-25-2009, 12:47 PM

Quote:

Originally Posted by msgross

entire tubs

BELL never made a Blazer

**lks dcvn** · 08-25-2009, 12:53 PM

windshield frame

jaros44sr · 08-25-2009, 01:57 PM

Quote:

Originally Posted by Tri-ProAutomotive

BELL never made a Blazer

Maybe Boeing?

I got one! Patch panel where the wheelhouse bolts to the bedside inner

jaros44sr · 08-25-2009, 01:58 PM

Quote:

Originally Posted by lks dcvn

windshield frame

Already asked him that, he nixed it as to much for tooling

jb4short · 08-25-2009, 02:23 PM

Quote:

Originally Posted by jaros44sr

Maybe Boeing?

I got one! Patch panel where the wheelhouse bolts to the bedside inner

hmm.....seems familiar

Show us what came in the box!

jaros44sr · 08-25-2009, 02:45 PM

Quote:

Originally Posted by Tri-ProAutomotive

hmm.....seems familiar

Show us what came in the box!

Let me get it mounted up first, looks better on a 4WD

vtblazer · 08-26-2009, 05:51 AM

Firewall patch panels.

* Behind the brake booster (most common)
* Pass side around the heater box
* cowl sides

JimmyFloyd · 08-26-2009, 10:38 AM

What about just making the windshield cap piece? That seems to be the most important part to the blazer windshield and doesn't seem to be too hard.

72truckman · 08-26-2009, 10:49 AM

how about a removable windshield cap piece with holes in it for snaps of a soft top?

Manuel Raptor · 08-26-2009, 06:19 PM

Rear bench seat front bolt down brackets.

Musclerodz · 08-26-2009, 10:58 PM

Upper cowl is badly needed. Should work for truck and Blazer. I had to clip one truck and have another I would save if it was available

drunkbus · 08-27-2009, 12:53 PM

Quote:

Originally Posted by Manuel Raptor

Rear bench seat front bolt down brackets.

I always wondered why nobody made these. Seams like an easy piece to stamp out and recover tooling expenses since they sell for $50-$75 per set. I looked into it a little bit and most places had a minimum production limit of 500 or 1,000 pieces. At $35 per pair 500 pieces or 250 sets would gross $8,750. I couldn't see it costing anything near that to produce, but what do I know?

jb4short · 08-28-2009, 05:31 AM

Thanks everyone.

Does anyone have a set of those brackets I could buy?

msgross · 08-28-2009, 06:50 AM

Quote:

Originally Posted by Tri-ProAutomotive

BELL never made a Blazer

true, and BELL is having as hard a time as GM now!

I'm a Sikorsky guy anyway!

vtblazer · 08-28-2009, 07:50 AM

Quote:

Originally Posted by Tri-ProAutomotive

Thanks everyone.

Does anyone have a set of those brackets I could buy?

Yes, I do.

hgs_notes · 08-28-2009, 09:32 AM

How about the rear floor? They make truck steel floors now for both the long and short beds.

That area at the rear of the door jamb and behind the seats, where the seat belts bolt in seems like a common rust area and I'm not aware of a patch for it.

A better, more affordable rear hatch would be great. The only repro one fits poorly for the handle, the quality (I've heard) is not so good.

If the whole upper windshield frame is too much trouble, a patch panel for the inner side, like they have now for truck cabs would be good.

The frame body mounts that are unique to blazers might be good. Mine are severely rusted on my 2wd frame. I need to find replacements or weld repair the ones I have.

How about the gas filler cover piece on the inside of the bed. The bottoms are always rusted off out here.

Carpet hold down strips are hard to find. Even poor quality used ones sell if they can be repainted or chromed.

Are there seat backs available for these? That plastic one for the buckets?

jb4short · 08-28-2009, 08:01 PM

Quote:

Originally Posted by vtblazer

Yes, I do.

Kurt- I'll take those. Just e-mail me details.

Thanks

jb4short · 08-28-2009, 08:02 PM

Quote:

Originally Posted by msgross

true, and BELL is having as hard a time as GM now!

I'm a Sikorsky guy anyway!

pffftt.....real aviators are USN...you know that

vtblazer · 08-31-2009, 01:44 PM

Quote:

Originally Posted by Tri-ProAutomotive

Kurt- I'll take those. Just e-mail me details.

Thanks

Jon,
They're yours - - - FREE

Thanks for all you do.

PM me your mailing addy please.

BLAZEtoBLAZE · 08-31-2009, 02:22 PM

Hello,

Im new to the 69-72 Blazers but i am having a hard time finding sun visor brackets for mine. seems like everyone selling them say they fit both blazers and trucks but they are different for blazers!

vtblazer · 08-31-2009, 02:30 PM

Quote:

Originally Posted by BLAZEtoBLAZE

seems like everyone selling them say they fit both blazers and trucks but they are different for blazers!

Welcome to the board.

Not sure where you've been finding your info but as you now know, they've been telling you wrong.

A lot of parts transfer from trucks to blazer but there's also a lot that won't.

Stick around, lots to learn on this site.

08-25-2009, 11:50 AM	#1
jb4short Damn Yankee Join Date: Feb 2007 Location: Lynchburg, VA Posts: 2,261	Research help needed Please E-MAIL me items that don't seem to be reproduced for the '69-'72 Blazers. E-Mail to jon@tri-proautomotive.com Thanks in advance!

08-25-2009, 12:04 PM	#2
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: Research help needed entire tubs __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

08-25-2009, 12:21 PM	#3
14U2NV Registered User Join Date: Mar 2002 Location: Midlothian, Tx Posts: 156	Re: Research help needed I sent you an e-mail Chad

08-25-2009, 12:23 PM	#4
smokekiki Mike Join Date: Jan 2003 Location: west chester pa Posts: 2,474	Re: Research help needed The strips that hold the weather stripping for around the tailgate. __________________ 70'c/10, 71 suburban4x4 402bb, 72suburban 4/6 drop, 72k/5 4x4 blazer 4" lift 35 tires

08-25-2009, 12:53 PM	#6
lks dcvn Registered User Join Date: Jan 2007 Location: Columbus, Ohio Posts: 4,339	Re: Research help needed windshield frame

08-26-2009, 05:51 AM	#11
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,538	Re: Research help needed Firewall patch panels. * Behind the brake booster (most common) * Pass side around the heater box * cowl sides

08-26-2009, 10:38 AM	#12
JimmyFloyd Registered User Join Date: Apr 2009 Location: Rochester, NY Posts: 1,458	Re: Research help needed What about just making the windshield cap piece? That seems to be the most important part to the blazer windshield and doesn't seem to be too hard. __________________ 1970 Blazer 350/SM465/205 SOLD! \| 1998 Z3

08-26-2009, 10:49 AM	#13
72truckman Registered User Join Date: Mar 2006 Location: San Ramon, California Posts: 276	Re: Research help needed how about a removable windshield cap piece with holes in it for snaps of a soft top? __________________ My 1972 Blazer 5.3 E85/ NV4500 5spd 4x4 Work in Progress http://67-72chevytrucks.com/vboard/s...d.php?t=291482 **SOLD!!!!!** 1965 GMC 4X4 http://67-72chevytrucks.com/vboard/s...d.php?t=294727

08-26-2009, 06:19 PM	#14
Manuel Raptor Registered User Join Date: Jun 2009 Location: Diamond Bar, Ca Posts: 94	Re: Research help needed Rear bench seat front bolt down brackets. __________________ 72 K5 CST Last edited by Manuel Raptor; 08-26-2009 at 06:20 PM.

08-26-2009, 10:58 PM	#15
Musclerodz Senior Member Join Date: Aug 2005 Location: OKC, OK Posts: 2,365	Re: Research help needed Upper cowl is badly needed. Should work for truck and Blazer. I had to clip one truck and have another I would save if it was available __________________ Mike Redpath

08-28-2009, 05:31 AM	#17
jb4short Damn Yankee Join Date: Feb 2007 Location: Lynchburg, VA Posts: 2,261	Re: Research help needed Thanks everyone. Does anyone have a set of those brackets I could buy?

08-28-2009, 09:32 AM	#20
hgs_notes GEARHEAD Join Date: Aug 2003 Location: MN Posts: 6,119	Re: Research help needed How about the rear floor? They make truck steel floors now for both the long and short beds. That area at the rear of the door jamb and behind the seats, where the seat belts bolt in seems like a common rust area and I'm not aware of a patch for it. A better, more affordable rear hatch would be great. The only repro one fits poorly for the handle, the quality (I've heard) is not so good. If the whole upper windshield frame is too much trouble, a patch panel for the inner side, like they have now for truck cabs would be good. The frame body mounts that are unique to blazers might be good. Mine are severely rusted on my 2wd frame. I need to find replacements or weld repair the ones I have. How about the gas filler cover piece on the inside of the bed. The bottoms are always rusted off out here. Carpet hold down strips are hard to find. Even poor quality used ones sell if they can be repainted or chromed. Are there seat backs available for these? That plastic one for the buckets? __________________ If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 Long Fleet C/10 72 Jimmy 4x4 (Junkyard Jimmy) HG's Plow Truck '78 K35 Dually Bigass Farm Truck HG's thread of miscellaneous stuff

08-31-2009, 02:22 PM	#24
BLAZEtoBLAZE Registered User Join Date: Mar 2009 Location: Ottawa, Ks Posts: 18	Re: Research help needed Hello, Im new to the 69-72 Blazers but i am having a hard time finding sun visor brackets for mine. seems like everyone selling them say they fit both blazers and trucks but they are different for blazers! __________________ 56 GMC Coe 3 door 49 GM COE custom built street rod 84 Blazer 12in Lift 70 Nova pro street project



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.