KS A few 65 GMC pieces - The 1947 - Present Chevrolet & GMC Truck Message Board Network

GMC406 · 02-28-2010, 08:56 PM

Bought a 65 for the running v-6/ trans and radiator and fuel tank. As far as I know that is all I am going to keep. All sheet metal is really rough either rust or banged up. Has good glass except for windshield. The hood is probably shot two small dents on front and rust on the bottom edge on both sides. The gage cluster is decent but nothing special. The cab isnt horible but again noting special, it does have a title. If anyone wants the chasis or anything let me know. Respond with what you want and if I have a pic of it on my camera I will post it when I get bateries.

**DPowers** · 02-28-2010, 10:09 PM

Pics or more info on cluster

**ScottH** · 02-28-2010, 10:46 PM

Interested in the following depending on price and condition:

seat belts
visors
wiper blades
heater controls (deluxe)
shifter arm

Thanks
Scott

GMC406 · 03-01-2010, 12:16 AM

I will post the few pics I have of inside can get more detailed ones if you want but It will probaly be a week at best before I see the truck again. Same goes for what you are interested in may be a week or two to get it out long as your not in a hurry. I will try to come up with prices shortly. PM me with any questions.

GMC406 · 03-01-2010, 12:27 AM

heres the inside

**ScottH** · 03-01-2010, 12:07 PM

Thanks for the pics. Doesnt look like seat belts or visors are there but would be interested in the heater controls, radio delete plate, and wipers (just the blades) if they are the original stainless style. I'll leave pricing up to u (mods will probably be after u to post prices anyway due to board rules).

thanks
Scott

**DPowers** · 03-01-2010, 12:35 PM

PM sent about cluster. ScottH is right about the need for prices.

GMC406 · 03-01-2010, 04:22 PM

OK guess I didnt read close enough to see I had to set prices. Just dont know what all the little things are worth. ScottH I can get more pics either this week or weekend. Will try to come up with some prices.

low79fx · 03-01-2010, 07:00 PM

2nd on heater control panel if ScottH declines.

GMCMG · 03-01-2010, 07:59 PM

How much for all the headlight hardware (inserts, rings, mounts) and headlight switch (or at least knob)? Is there a horn button? How is the tailgate? What do you plan on doing with the rest of it once you part it out?
Thanks.

GMC406 · 03-01-2010, 09:04 PM

OK low79

GMCMG Hows $10 + ship sound minus the switch D Powers has first dibs on that. Tailgate is pretty darn ugly. The rest will get crushed for steel price unless its worth more than that to someone for a chasis. I Beleive it would bring close to 300 or over for steel based on what others have hauled in lately.

If I am slow getting back to you on a price I am probably researchng to find a fair cost, dont want to give it away, but I dont want to rip anyone off either.

GMC406 · 03-01-2010, 09:46 PM

ScottH Pending adding some visors and seat belts if your still interested when I get pictures of them how is $40+ship for delete plate, heater controls and wipers

GMC406 · 03-01-2010, 11:45 PM

Heres a few more pics of the outside(probbly wont help anyone, shes swiss cheese, but just in case)

**ScottH** · 03-02-2010, 10:44 AM

Can u post pics of the wiper blades when u get a chance?
BTW do u need any parts, I think I'll be getting a 66 GMC parts truck soon.

Thanks

Scott

GMC406 · 03-02-2010, 11:02 AM

The only things I can think of needing right now that I dont have are decent front fenders and a 61 drivers door. Will get more pics next time I am at the farm.

magooster · 03-02-2010, 12:25 PM

How much for the cluster?

GMC406 · 03-02-2010, 01:28 PM

$30 but DPowers is first in line if he passes you will be second.

**DPowers** · 03-02-2010, 01:47 PM

Did you get my PM?

GMC406 · 03-02-2010, 01:54 PM

Yes I did, whenever I get back up there I will have it running and make sure all the gagues and the switches you want all function before you worry about sending me money.

**DPowers** · 03-02-2010, 03:31 PM

Works for me- no rush and just let me know.

63 extreme low · 03-03-2010, 03:46 AM

Would you cut out the whole dash and ship to 40004? How much?

GMC406 · 03-03-2010, 04:18 AM

Assuming I can get it out ok I could do that. Did some looking on here and seems $100 + ship would be fair, not for sure on shipping seen others going for $50 would have to check on weight and all when/if I can get it out for you. Will keep in touch if that sounds good to you. You are just wanting the whole dash from pillar to pillar correct. Would have no gages, ashtray, delete plate or heater controls. Glove box door would stay with it tho.

reighmey · 03-03-2010, 06:54 PM

How do the rear light look?

GMC406 · 03-03-2010, 07:04 PM

not sure reighmey but can remove and take pics this weekend

GMC406 · 03-03-2010, 10:17 PM

If anyone would want the full rolling frame I would take $225 and deliver/meet within 150-200 miles for price of gas and a few bucks.

02-28-2010, 08:56 PM	#1
GMC406 Professional Grade Join Date: May 2009 Location: Hill City KS Posts: 366	A few 65 GMC pieces Bought a 65 for the running v-6/ trans and radiator and fuel tank. As far as I know that is all I am going to keep. All sheet metal is really rough either rust or banged up. Has good glass except for windshield. The hood is probably shot two small dents on front and rust on the bottom edge on both sides. The gage cluster is decent but nothing special. The cab isnt horible but again noting special, it does have a title. If anyone wants the chasis or anything let me know. Respond with what you want and if I have a pic of it on my camera I will post it when I get bateries. __________________ 61 GMC 9' Step Someday it will be a build http://67-72chevytrucks.com/vboard/s...=1#post3356828 67 C-30 Red Dale motorhome http://67-72chevytrucks.com/vboard/s...31#post3845531 71 GMC Street performer in the works Waiting for warm weather http://67-72chevytrucks.com/vboard/s...d.php?t=341946 1990 GMC Sierra GT-sold 1983 chevy 4x4-project on hold maybe sell 1969 Triuph GT 6- sold 1996 Ford I-6 5 Speed 4x4 2004 Dodge Intrepid- milage maker 1959 Ford Fairlaine, factory a/c 292Yblock- sold 1982 Honda XL500R Always lookin for other old trucks!

02-28-2010, 10:09 PM	#2
DPowers One foot in front of the other Join Date: Aug 2008 Location: Parrottsville, TN Posts: 5,435	Re: A few 65 GMC pieces Pics or more info on cluster __________________ DP's 66 Build http://67-72chevytrucks.com/vboard/s...d.php?t=361556

02-28-2010, 10:46 PM	#3
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: A few 65 GMC pieces Interested in the following depending on price and condition: seat belts visors wiper blades heater controls (deluxe) shifter arm Thanks Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

03-01-2010, 12:16 AM	#4
GMC406 Professional Grade Join Date: May 2009 Location: Hill City KS Posts: 366	Re: A few 65 GMC pieces I will post the few pics I have of inside can get more detailed ones if you want but It will probaly be a week at best before I see the truck again. Same goes for what you are interested in may be a week or two to get it out long as your not in a hurry. I will try to come up with prices shortly. PM me with any questions. __________________ 61 GMC 9' Step Someday it will be a build http://67-72chevytrucks.com/vboard/s...=1#post3356828 67 C-30 Red Dale motorhome http://67-72chevytrucks.com/vboard/s...31#post3845531 71 GMC Street performer in the works Waiting for warm weather http://67-72chevytrucks.com/vboard/s...d.php?t=341946 1990 GMC Sierra GT-sold 1983 chevy 4x4-project on hold maybe sell 1969 Triuph GT 6- sold 1996 Ford I-6 5 Speed 4x4 2004 Dodge Intrepid- milage maker 1959 Ford Fairlaine, factory a/c 292Yblock- sold 1982 Honda XL500R Always lookin for other old trucks! Last edited by GMC406; 03-01-2010 at 06:19 PM.

03-01-2010, 12:27 AM	#5
GMC406 Professional Grade Join Date: May 2009 Location: Hill City KS Posts: 366	Re: A few 65 GMC pieces heres the inside Attached Images __________________ 61 GMC 9' Step Someday it will be a build http://67-72chevytrucks.com/vboard/s...=1#post3356828 67 C-30 Red Dale motorhome http://67-72chevytrucks.com/vboard/s...31#post3845531 71 GMC Street performer in the works Waiting for warm weather http://67-72chevytrucks.com/vboard/s...d.php?t=341946 1990 GMC Sierra GT-sold 1983 chevy 4x4-project on hold maybe sell 1969 Triuph GT 6- sold 1996 Ford I-6 5 Speed 4x4 2004 Dodge Intrepid- milage maker 1959 Ford Fairlaine, factory a/c 292Yblock- sold 1982 Honda XL500R Always lookin for other old trucks!

03-01-2010, 12:07 PM	#6
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: A few 65 GMC pieces Thanks for the pics. Doesnt look like seat belts or visors are there but would be interested in the heater controls, radio delete plate, and wipers (just the blades) if they are the original stainless style. I'll leave pricing up to u (mods will probably be after u to post prices anyway due to board rules). thanks Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

03-01-2010, 12:35 PM	#7
DPowers One foot in front of the other Join Date: Aug 2008 Location: Parrottsville, TN Posts: 5,435	Re: A few 65 GMC pieces PM sent about cluster. ScottH is right about the need for prices. __________________ DP's 66 Build http://67-72chevytrucks.com/vboard/s...d.php?t=361556 Last edited by DPowers; 03-01-2010 at 12:36 PM.

03-01-2010, 04:22 PM	#8
GMC406 Professional Grade Join Date: May 2009 Location: Hill City KS Posts: 366	Re: A few 65 GMC pieces OK guess I didnt read close enough to see I had to set prices. Just dont know what all the little things are worth. ScottH I can get more pics either this week or weekend. Will try to come up with some prices. __________________ 61 GMC 9' Step Someday it will be a build http://67-72chevytrucks.com/vboard/s...=1#post3356828 67 C-30 Red Dale motorhome http://67-72chevytrucks.com/vboard/s...31#post3845531 71 GMC Street performer in the works Waiting for warm weather http://67-72chevytrucks.com/vboard/s...d.php?t=341946 1990 GMC Sierra GT-sold 1983 chevy 4x4-project on hold maybe sell 1969 Triuph GT 6- sold 1996 Ford I-6 5 Speed 4x4 2004 Dodge Intrepid- milage maker 1959 Ford Fairlaine, factory a/c 292Yblock- sold 1982 Honda XL500R Always lookin for other old trucks! Last edited by GMC406; 03-01-2010 at 04:22 PM.

03-01-2010, 07:00 PM	#9
low79fx Registered User Join Date: Jun 2008 Location: odessa,tx Posts: 208	Re: A few 65 GMC pieces 2nd on heater control panel if ScottH declines.

03-01-2010, 07:59 PM	#10
GMCMG Registered User Join Date: Nov 2009 Location: Center, MO Posts: 121	Re: A few 65 GMC pieces How much for all the headlight hardware (inserts, rings, mounts) and headlight switch (or at least knob)? Is there a horn button? How is the tailgate? What do you plan on doing with the rest of it once you part it out? Thanks. __________________ GMCMG 1964 GMC 1/2 ton LWB project - 1982 GMC 6.2 diesel engine/suspension donor - 1966 Chevy 3/4 ton frame/doors/fenders donor - tons of parts - cause you can't build a truck without 4 of everything! 2001 3/4HD Duramax Diesel extended cab lwb4x4 1984 Chevy C30 6.2 diesel lift truck (project) 1962 GMC w/5 lugs, 350/350 auto (was for parts, but couldn't bring myself to do it!) glascock.m@hotmail.com

03-01-2010, 09:04 PM	#11
GMC406 Professional Grade Join Date: May 2009 Location: Hill City KS Posts: 366	Re: A few 65 GMC pieces OK low79 GMCMG Hows $10 + ship sound minus the switch D Powers has first dibs on that. Tailgate is pretty darn ugly. The rest will get crushed for steel price unless its worth more than that to someone for a chasis. I Beleive it would bring close to 300 or over for steel based on what others have hauled in lately. If I am slow getting back to you on a price I am probably researchng to find a fair cost, dont want to give it away, but I dont want to rip anyone off either. __________________ 61 GMC 9' Step Someday it will be a build http://67-72chevytrucks.com/vboard/s...=1#post3356828 67 C-30 Red Dale motorhome http://67-72chevytrucks.com/vboard/s...31#post3845531 71 GMC Street performer in the works Waiting for warm weather http://67-72chevytrucks.com/vboard/s...d.php?t=341946 1990 GMC Sierra GT-sold 1983 chevy 4x4-project on hold maybe sell 1969 Triuph GT 6- sold 1996 Ford I-6 5 Speed 4x4 2004 Dodge Intrepid- milage maker 1959 Ford Fairlaine, factory a/c 292Yblock- sold 1982 Honda XL500R Always lookin for other old trucks! Last edited by GMC406; 03-01-2010 at 09:12 PM.

03-01-2010, 09:46 PM	#12
GMC406 Professional Grade Join Date: May 2009 Location: Hill City KS Posts: 366	Re: A few 65 GMC pieces ScottH Pending adding some visors and seat belts if your still interested when I get pictures of them how is $40+ship for delete plate, heater controls and wipers __________________ 61 GMC 9' Step Someday it will be a build http://67-72chevytrucks.com/vboard/s...=1#post3356828 67 C-30 Red Dale motorhome http://67-72chevytrucks.com/vboard/s...31#post3845531 71 GMC Street performer in the works Waiting for warm weather http://67-72chevytrucks.com/vboard/s...d.php?t=341946 1990 GMC Sierra GT-sold 1983 chevy 4x4-project on hold maybe sell 1969 Triuph GT 6- sold 1996 Ford I-6 5 Speed 4x4 2004 Dodge Intrepid- milage maker 1959 Ford Fairlaine, factory a/c 292Yblock- sold 1982 Honda XL500R Always lookin for other old trucks!

03-01-2010, 11:45 PM	#13
GMC406 Professional Grade Join Date: May 2009 Location: Hill City KS Posts: 366	Re: A few 65 GMC pieces Heres a few more pics of the outside(probbly wont help anyone, shes swiss cheese, but just in case) Attached Images __________________ 61 GMC 9' Step Someday it will be a build http://67-72chevytrucks.com/vboard/s...=1#post3356828 67 C-30 Red Dale motorhome http://67-72chevytrucks.com/vboard/s...31#post3845531 71 GMC Street performer in the works Waiting for warm weather http://67-72chevytrucks.com/vboard/s...d.php?t=341946 1990 GMC Sierra GT-sold 1983 chevy 4x4-project on hold maybe sell 1969 Triuph GT 6- sold 1996 Ford I-6 5 Speed 4x4 2004 Dodge Intrepid- milage maker 1959 Ford Fairlaine, factory a/c 292Yblock- sold 1982 Honda XL500R Always lookin for other old trucks! Last edited by GMC406; 03-01-2010 at 11:46 PM.

03-02-2010, 10:44 AM	#14
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: A few 65 GMC pieces Can u post pics of the wiper blades when u get a chance? BTW do u need any parts, I think I'll be getting a 66 GMC parts truck soon. Thanks Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon Last edited by ScottH; 03-02-2010 at 10:45 AM.

03-02-2010, 11:02 AM	#15
GMC406 Professional Grade Join Date: May 2009 Location: Hill City KS Posts: 366	Re: A few 65 GMC pieces The only things I can think of needing right now that I dont have are decent front fenders and a 61 drivers door. Will get more pics next time I am at the farm. __________________ 61 GMC 9' Step Someday it will be a build http://67-72chevytrucks.com/vboard/s...=1#post3356828 67 C-30 Red Dale motorhome http://67-72chevytrucks.com/vboard/s...31#post3845531 71 GMC Street performer in the works Waiting for warm weather http://67-72chevytrucks.com/vboard/s...d.php?t=341946 1990 GMC Sierra GT-sold 1983 chevy 4x4-project on hold maybe sell 1969 Triuph GT 6- sold 1996 Ford I-6 5 Speed 4x4 2004 Dodge Intrepid- milage maker 1959 Ford Fairlaine, factory a/c 292Yblock- sold 1982 Honda XL500R Always lookin for other old trucks!



Register or Log In To remove these advertisements.

03-02-2010, 12:25 PM	#16
magooster '65 GMC Project Join Date: May 2005 Location: Abbotsford, BC Posts: 653	Re: A few 65 GMC pieces How much for the cluster? __________________ Beauty is in the eye of the beer holder 1965 GMC project 1999 GMC Safari (daily driver) 2005 Scion XB (Wifey's car)

03-02-2010, 01:28 PM	#17
GMC406 Professional Grade Join Date: May 2009 Location: Hill City KS Posts: 366	Re: A few 65 GMC pieces $30 but DPowers is first in line if he passes you will be second. __________________ 61 GMC 9' Step Someday it will be a build http://67-72chevytrucks.com/vboard/s...=1#post3356828 67 C-30 Red Dale motorhome http://67-72chevytrucks.com/vboard/s...31#post3845531 71 GMC Street performer in the works Waiting for warm weather http://67-72chevytrucks.com/vboard/s...d.php?t=341946 1990 GMC Sierra GT-sold 1983 chevy 4x4-project on hold maybe sell 1969 Triuph GT 6- sold 1996 Ford I-6 5 Speed 4x4 2004 Dodge Intrepid- milage maker 1959 Ford Fairlaine, factory a/c 292Yblock- sold 1982 Honda XL500R Always lookin for other old trucks!

03-02-2010, 01:47 PM	#18
DPowers One foot in front of the other Join Date: Aug 2008 Location: Parrottsville, TN Posts: 5,435	Re: A few 65 GMC pieces Did you get my PM? __________________ DP's 66 Build http://67-72chevytrucks.com/vboard/s...d.php?t=361556

03-02-2010, 01:54 PM	#19
GMC406 Professional Grade Join Date: May 2009 Location: Hill City KS Posts: 366	Re: A few 65 GMC pieces Yes I did, whenever I get back up there I will have it running and make sure all the gagues and the switches you want all function before you worry about sending me money. __________________ 61 GMC 9' Step Someday it will be a build http://67-72chevytrucks.com/vboard/s...=1#post3356828 67 C-30 Red Dale motorhome http://67-72chevytrucks.com/vboard/s...31#post3845531 71 GMC Street performer in the works Waiting for warm weather http://67-72chevytrucks.com/vboard/s...d.php?t=341946 1990 GMC Sierra GT-sold 1983 chevy 4x4-project on hold maybe sell 1969 Triuph GT 6- sold 1996 Ford I-6 5 Speed 4x4 2004 Dodge Intrepid- milage maker 1959 Ford Fairlaine, factory a/c 292Yblock- sold 1982 Honda XL500R Always lookin for other old trucks!

03-02-2010, 03:31 PM	#20
DPowers One foot in front of the other Join Date: Aug 2008 Location: Parrottsville, TN Posts: 5,435	Re: A few 65 GMC pieces Works for me- no rush and just let me know. __________________ DP's 66 Build http://67-72chevytrucks.com/vboard/s...d.php?t=361556

03-03-2010, 03:46 AM	#21
63 extreme low Registered User Join Date: Sep 2009 Location: Bardstown, KY Posts: 91	Re: A few 65 GMC pieces Would you cut out the whole dash and ship to 40004? How much? __________________ 1963 Big Back window short fleet

03-03-2010, 04:18 AM	#22
GMC406 Professional Grade Join Date: May 2009 Location: Hill City KS Posts: 366	Re: A few 65 GMC pieces Assuming I can get it out ok I could do that. Did some looking on here and seems $100 + ship would be fair, not for sure on shipping seen others going for $50 would have to check on weight and all when/if I can get it out for you. Will keep in touch if that sounds good to you. You are just wanting the whole dash from pillar to pillar correct. Would have no gages, ashtray, delete plate or heater controls. Glove box door would stay with it tho. __________________ 61 GMC 9' Step Someday it will be a build http://67-72chevytrucks.com/vboard/s...=1#post3356828 67 C-30 Red Dale motorhome http://67-72chevytrucks.com/vboard/s...31#post3845531 71 GMC Street performer in the works Waiting for warm weather http://67-72chevytrucks.com/vboard/s...d.php?t=341946 1990 GMC Sierra GT-sold 1983 chevy 4x4-project on hold maybe sell 1969 Triuph GT 6- sold 1996 Ford I-6 5 Speed 4x4 2004 Dodge Intrepid- milage maker 1959 Ford Fairlaine, factory a/c 292Yblock- sold 1982 Honda XL500R Always lookin for other old trucks! Last edited by GMC406; 03-03-2010 at 04:20 AM.

03-03-2010, 06:54 PM	#23
reighmey Registered User Join Date: Oct 2009 Location: lumpkin, ga Posts: 98	Re: A few 65 GMC pieces How do the rear light look?

03-03-2010, 07:04 PM	#24
GMC406 Professional Grade Join Date: May 2009 Location: Hill City KS Posts: 366	Re: A few 65 GMC pieces not sure reighmey but can remove and take pics this weekend __________________ 61 GMC 9' Step Someday it will be a build http://67-72chevytrucks.com/vboard/s...=1#post3356828 67 C-30 Red Dale motorhome http://67-72chevytrucks.com/vboard/s...31#post3845531 71 GMC Street performer in the works Waiting for warm weather http://67-72chevytrucks.com/vboard/s...d.php?t=341946 1990 GMC Sierra GT-sold 1983 chevy 4x4-project on hold maybe sell 1969 Triuph GT 6- sold 1996 Ford I-6 5 Speed 4x4 2004 Dodge Intrepid- milage maker 1959 Ford Fairlaine, factory a/c 292Yblock- sold 1982 Honda XL500R Always lookin for other old trucks!

03-03-2010, 10:17 PM	#25
GMC406 Professional Grade Join Date: May 2009 Location: Hill City KS Posts: 366	Re: A few 65 GMC pieces If anyone would want the full rolling frame I would take $225 and deliver/meet within 150-200 miles for price of gas and a few bucks. __________________ 61 GMC 9' Step Someday it will be a build http://67-72chevytrucks.com/vboard/s...=1#post3356828 67 C-30 Red Dale motorhome http://67-72chevytrucks.com/vboard/s...31#post3845531 71 GMC Street performer in the works Waiting for warm weather http://67-72chevytrucks.com/vboard/s...d.php?t=341946 1990 GMC Sierra GT-sold 1983 chevy 4x4-project on hold maybe sell 1969 Triuph GT 6- sold 1996 Ford I-6 5 Speed 4x4 2004 Dodge Intrepid- milage maker 1959 Ford Fairlaine, factory a/c 292Yblock- sold 1982 Honda XL500R Always lookin for other old trucks! Last edited by GMC406; 03-03-2010 at 10:18 PM.

Register or Log In To remove these advertisements.