99 S-10 door hinge pins - The 1947 - Present Chevrolet & GMC Truck Message Board Network

61_FL_Apache · 09-24-2011, 10:35 AM

My drivers door hinge pin is wore out to the point the door sags and hits when closed. I noticed the hole for the pin is now egg shaped. Is there a hinge pin kit to help with this problem?

I have found replacement pins and bushings, but is this the same thing I need for a hole that is too large?

Thanks for the help!

**truckdude239** · 09-24-2011, 05:05 PM

I just did these on our 88 blazer, now i i've heard of people putting jb weld with the bushing and let it dry for couple of day before mounting door(dont know how long it would hold up). common fix is to weld the hold and redrill it

**truckdude239** · 09-24-2011, 11:12 PM

i did find out for egg shap holes gm sells an over size bushing and pin just drill out and install

61_FL_Apache · 09-25-2011, 10:43 AM

Thanks for the info Dave!

61_FL_Apache · 09-25-2011, 12:02 PM

It actually looks like the bushing is wore out. The hole in the hinge looks to be round still. I found a hinge/bushing kit online and ordered it.

Thanks again for the help.

67ChevyRedneck · 09-26-2011, 09:32 AM

I got my kit for a few bucks at the local autozone/advance in the "help" section. The hardest part is getting the spring in/out on the upper hinge. Made a huge difference on my door. I didn't notice how bad it was until it really sucked, luckily only my bushings were egg shaped.

**truckdude239** · 09-26-2011, 10:02 AM

, i bought the bushings for our company truck at Advance auto parts for 24 buxs for both sides, they make a specical tool for the door spings they sell on ebay for about 20 buxs but i made mine, using an old piece of chain out of my car was Chain is a d88k chain, grounsd the ends off so ti would fit in the spring and drilled a hole for a bolt

09-24-2011, 10:35 AM	#1
61_FL_Apache Who Me? Join Date: Sep 2010 Location: Royal Palm Beach, FL Posts: 4,067	99 S-10 door hinge pins My drivers door hinge pin is wore out to the point the door sags and hits when closed. I noticed the hole for the pin is now egg shaped. Is there a hinge pin kit to help with this problem? I have found replacement pins and bushings, but is this the same thing I need for a hole that is too large? Thanks for the help! __________________ Steve 1997 Tahoe LT 4D 2WD (DD) 2001 Blazer 4D 2WD 1961 Apache 10 (sold) 1965 C10 Stepper (sold)

09-24-2011, 05:05 PM	#2
truckdude239 Senior Member Join Date: Sep 2005 Location: Lewisville, Nc Posts: 10,228	Re: 99 S-10 door hinge pins I just did these on our 88 blazer, now i i've heard of people putting jb weld with the bushing and let it dry for couple of day before mounting door(dont know how long it would hold up). common fix is to weld the hold and redrill it __________________ David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube Last edited by truckdude239; 09-24-2011 at 11:13 PM.

09-24-2011, 11:12 PM	#3
truckdude239 Senior Member Join Date: Sep 2005 Location: Lewisville, Nc Posts: 10,228	Re: 99 S-10 door hinge pins i did find out for egg shap holes gm sells an over size bushing and pin just drill out and install __________________ David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube

09-25-2011, 10:43 AM	#4
61_FL_Apache Who Me? Join Date: Sep 2010 Location: Royal Palm Beach, FL Posts: 4,067	Re: 99 S-10 door hinge pins Thanks for the info Dave! __________________ Steve 1997 Tahoe LT 4D 2WD (DD) 2001 Blazer 4D 2WD 1961 Apache 10 (sold) 1965 C10 Stepper (sold)

09-25-2011, 12:02 PM	#5
61_FL_Apache Who Me? Join Date: Sep 2010 Location: Royal Palm Beach, FL Posts: 4,067	Re: 99 S-10 door hinge pins It actually looks like the bushing is wore out. The hole in the hinge looks to be round still. I found a hinge/bushing kit online and ordered it. Thanks again for the help. __________________ Steve 1997 Tahoe LT 4D 2WD (DD) 2001 Blazer 4D 2WD 1961 Apache 10 (sold) 1965 C10 Stepper (sold)

09-26-2011, 09:32 AM	#6
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: 99 S-10 door hinge pins I got my kit for a few bucks at the local autozone/advance in the "help" section. The hardest part is getting the spring in/out on the upper hinge. Made a huge difference on my door. I didn't notice how bad it was until it really sucked, luckily only my bushings were egg shaped. __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

09-26-2011, 10:02 AM	#7
truckdude239 Senior Member Join Date: Sep 2005 Location: Lewisville, Nc Posts: 10,228	Re: 99 S-10 door hinge pins , i bought the bushings for our company truck at Advance auto parts for 24 buxs for both sides, they make a specical tool for the door spings they sell on ebay for about 20 buxs but i made mine, using an old piece of chain out of my car was Chain is a d88k chain, grounsd the ends off so ti would fit in the spring and drilled a hole for a bolt Attached Images __________________ David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.