cragar 30 spoke fun! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

sneaky · 07-22-2012, 05:30 PM

Hey guys, picked up this set of cragars for 80 bucks on craigslist in pretty rough shape. The guy i bought them from said I should try Oxalic acid on them, so I looked the stuff up and ordered a few pounds off of ebay. The stuff basically will remove rust without scrubbing or damaging the surface around the rust. If its not too deep it will remove the rust with no residue, for the really bad spots you get left with a black pitting...still not that bad though. I left each wheel in a tub for a couple of days and am happy with the results!
As you can imagine, I have dipped about everthing i could find that was rusty. This stuff is awesome, just mix with water and wait.

most of the wheels looked about like this:

the mix starts to change colors after it begins working:

this was the worst spot, and am pretty much left with it this way...still way better than before:

sneaky · 07-22-2012, 05:34 PM

The mix even got rid of the hazing that was on the chrome.

here are some pics mounted: 15x10 rears with 275 60 15s and 15x7 fronts with 235 70 15s.
Shes just my old beater junkyard truck so please dont be too hard on me! =)

ChevLoRay · 07-22-2012, 05:35 PM

You might want to consider some powder-coating. A little light sandblasting would give 'em a surface that the powder could attach to and you'd be done. Coordinate the colors with your truck or contrast them. There's a silver that is almost chrome-like that may appeal. But, no more rust if you do.

Dang, you slipped another post in right ahead of mine. Look good. But, my suggestion still stands....

Bar Keepers Friend (cleanser) contains Oxalic Acid...just in case someone didn't know.

sneaky · 07-22-2012, 05:42 PM

Quote:

Originally Posted by ChevLoRay

You might want to consider some powder-coating. A little light sandblasting would give 'em a surface that the powder could attach to and you'd be done. Coordinate the colors with your truck or contrast them. There's a silver that is almost chrome-like that may appeal. But, no more rust if you do.

Dang, you slipped another post in right ahead of mine. Look good. But, my suggestion still stands....

Bar Keepers Friend (cleanser) contains Oxalic Acid...just in case someone didn't know.

yeah, not really wanting to throw any more cash at the wheels....the tires were enough! I'm just going to stay ontop of them and try to keep them clean and dry!! thanks!!

missinfishin10 · 07-22-2012, 05:54 PM

They look great, I like them!

VWBeamer · 07-22-2012, 07:05 PM

Look good to me...Two thumbs up!! Should be fine if you keep wax on them, if anything you can spray them with clear.

They look good on the truck and that's not a wheel you see everyday.

**special-K** · 07-22-2012, 07:08 PM

They look much better. I always wondered what it would look like to brush some silver paint on the spots of rust. It seems that would blend better with the chrome and help keep the rust under control

richards72chevy · 07-22-2012, 07:43 PM

Looks great.It gives it an old school look.

CG · 07-22-2012, 07:49 PM

30 spoke Cragars are cool!

JohnT71 · 07-22-2012, 08:01 PM

They look great, that stuff worked good. Old school cool.

**MusicMan70** · 07-22-2012, 08:01 PM

Those rims came out Fantastic and look great on the truck as well!

Pop's C-10 · 07-22-2012, 08:05 PM

I like em...

sneaky · 07-22-2012, 08:36 PM

thanks everyone!! I'm really digign them, been getting "thumbs up" too so thats kinda cool. I actually sprayed a tiny bit of clear on the affected areas, you can really only see it if you get up on them.

I also got back into old bicycles lately, that mixture is killer for chains, dropouts, handle bars etc....well worth having it lying around.

Malamute · 07-22-2012, 09:22 PM

Normally not my cup of tea, but I really think they look great with your truck. Sometimes not going with the trend is the best way to go.

**70cst** · 07-22-2012, 09:36 PM

Quote:

Originally Posted by MusicMan70

Those rims came out Fantastic and look great on the truck as well!

100%

MYGMCANDME · 07-22-2012, 09:39 PM

Man, those things cleaned up great! They look fantastic on the truck too. Nice score.

Jon

Hubscrub · 07-22-2012, 09:40 PM

Quote:

Originally Posted by Malamute

Normally not my cup of tea, but I really think they look great with your truck. Sometimes not going with the trend is the best way to go.

totally agree, those look great

sneaky · 07-23-2012, 04:11 PM

Thanks again, everyone. When I bought the truck I wanted some spokes, glad they showed up on cl.

Stickman · 07-23-2012, 04:23 PM

Cleaned up well.They look great.

54Caddy · 07-23-2012, 04:26 PM

dang lucky. I like those 30 spokes. They cleaned up well for sure. If you get tired of them ship them too me ahahha

sneaky · 07-23-2012, 05:45 PM

Quote:

Originally Posted by 54Caddy

dang lucky. I like those 30 spokes. They cleaned up well for sure. If you get tired of them ship them too me ahahha

fo sho!

thanks Caddy & Stickman.

richards72chevy · 07-24-2012, 08:13 PM

Now all you need is some metal flake on the roof.

sneaky · 07-24-2012, 08:31 PM

Quote:

Originally Posted by richards72chevy

Now all you need is some metal flake on the roof.

hell yeah..that'd be badass....Thanks Dick, err Richard!! Srsly, before you even said that I was like..hmmmmm..now, after googling around I kinda want to do it..lol....thanks again man! Would you do the A-pillars too, or just the roof? I'm thinking roof only because of the cowl lines???

richards72chevy · 07-24-2012, 09:13 PM

It would be easier to do just the roof.Unless you plan on taking out the front glass.Maybe some one can photo shop both styles for you.

sneaky · 07-24-2012, 09:17 PM

Quote:

Originally Posted by richards72chevy

It would be easier to do just the roof.Unless you plan on taking out the front glass.Maybe some one can photo shop both styles for you.

cool. You're right. I honestly thought you were messing with me at first. It does look good. I guess I need to get out more often, lol...good call.

07-22-2012, 05:30 PM	#1
sneaky Registered User Join Date: Apr 2011 Location: nashville, tn Posts: 126	cragar 30 spoke fun! Hey guys, picked up this set of cragars for 80 bucks on craigslist in pretty rough shape. The guy i bought them from said I should try Oxalic acid on them, so I looked the stuff up and ordered a few pounds off of ebay. The stuff basically will remove rust without scrubbing or damaging the surface around the rust. If its not too deep it will remove the rust with no residue, for the really bad spots you get left with a black pitting...still not that bad though. I left each wheel in a tub for a couple of days and am happy with the results! As you can imagine, I have dipped about everthing i could find that was rusty. This stuff is awesome, just mix with water and wait. most of the wheels looked about like this: the mix starts to change colors after it begins working: this was the worst spot, and am pretty much left with it this way...still way better than before:

07-22-2012, 05:34 PM	#2
sneaky Registered User Join Date: Apr 2011 Location: nashville, tn Posts: 126	Re: cragar 30 spoke fun! The mix even got rid of the hazing that was on the chrome. here are some pics mounted: 15x10 rears with 275 60 15s and 15x7 fronts with 235 70 15s. Shes just my old beater junkyard truck so please dont be too hard on me! =)

07-22-2012, 05:35 PM	#3
ChevLoRay Old Skool Club Join Date: Jun 2001 Location: Benton, AR "The Heart of Arkansas" Posts: 10,880	Re: cragar 30 spoke fun! You might want to consider some powder-coating. A little light sandblasting would give 'em a surface that the powder could attach to and you'd be done. Coordinate the colors with your truck or contrast them. There's a silver that is almost chrome-like that may appeal. But, no more rust if you do. Dang, you slipped another post in right ahead of mine. Look good. But, my suggestion still stands.... Bar Keepers Friend (cleanser) contains Oxalic Acid...just in case someone didn't know. __________________ Member Nr. 2770 '96 GMC Sportside; 4.3/SLT - Daily driven....constantly needs washed. '69 C-10 SWB; 350/TH400 - in limbo The older I get, the better I was.

07-22-2012, 05:54 PM	#5
missinfishin10 Amazed Member Join Date: May 2010 Location: Dahlonega Georgia Posts: 486	Re: cragar 30 spoke fun! They look great, I like them! __________________ 71 LWB Fleetside 1950 3100 Original Project!

07-22-2012, 07:05 PM	#6
VWBeamer Registered User Join Date: Jun 2011 Location: GA Posts: 281	Re: cragar 30 spoke fun! Look good to me...Two thumbs up!! Should be fine if you keep wax on them, if anything you can spray them with clear. They look good on the truck and that's not a wheel you see everyday.

07-22-2012, 07:08 PM	#7
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: cragar 30 spoke fun! They look much better. I always wondered what it would look like to brush some silver paint on the spots of rust. It seems that would blend better with the chrome and help keep the rust under control __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

07-22-2012, 07:43 PM	#8
richards72chevy Registered User Join Date: Dec 2010 Location: konawa ok/oakdale Ca. Posts: 1,648	Re: cragar 30 spoke fun! Looks great.It gives it an old school look.

07-22-2012, 07:49 PM	#9
CG BlahBlahBlah Join Date: Feb 2002 Location: Wa. Posts: 19,791	Re: cragar 30 spoke fun! 30 spoke Cragars are cool! __________________ … … … … … … … … ... … … … … … … … … … … …

07-22-2012, 08:01 PM	#10
JohnT71 Registered User Join Date: Feb 2011 Location: Plainview Ar Posts: 82	Re: cragar 30 spoke fun! They look great, that stuff worked good. Old school cool.

07-22-2012, 08:01 PM	#11
MusicMan70 Senior Member Join Date: Feb 2011 Location: Corona, CA Posts: 1,821	Re: cragar 30 spoke fun! Those rims came out Fantastic and look great on the truck as well! __________________ MusicMan70 1961 GMC Suburban

07-22-2012, 08:05 PM	#12
Pop's C-10 Registered User Join Date: Jul 2010 Location: memphis Posts: 2,537	Re: cragar 30 spoke fun! I like em... __________________ 1981 C-10 (Pop's) 1978 Camaro 2006 Lacrosse

07-22-2012, 08:36 PM	#13
sneaky Registered User Join Date: Apr 2011 Location: nashville, tn Posts: 126	Re: cragar 30 spoke fun! thanks everyone!! I'm really digign them, been getting "thumbs up" too so thats kinda cool. I actually sprayed a tiny bit of clear on the affected areas, you can really only see it if you get up on them. I also got back into old bicycles lately, that mixture is killer for chains, dropouts, handle bars etc....well worth having it lying around.

07-22-2012, 09:22 PM	#14
Malamute Registered User Join Date: Sep 2011 Location: Louisville, KY Posts: 756	Re: cragar 30 spoke fun! Normally not my cup of tea, but I really think they look great with your truck. Sometimes not going with the trend is the best way to go.

07-22-2012, 09:39 PM	#16
MYGMCANDME Registered User Join Date: Mar 2008 Location: BOWLING GREEN, KY Posts: 115	Re: cragar 30 spoke fun! Man, those things cleaned up great! They look fantastic on the truck too. Nice score. Jon

07-23-2012, 04:11 PM	#18
sneaky Registered User Join Date: Apr 2011 Location: nashville, tn Posts: 126	Re: cragar 30 spoke fun! Thanks again, everyone. When I bought the truck I wanted some spokes, glad they showed up on cl.



Register or Log In To remove these advertisements.

07-23-2012, 04:23 PM	#19
Stickman Registered User Join Date: Mar 2008 Location: Chandler,AZ Posts: 572	Re: cragar 30 spoke fun! Cleaned up well.They look great.

07-23-2012, 04:26 PM	#20
54Caddy GM Addicted Join Date: Jan 2009 Location: Visalia, Ca Posts: 2,291	Re: cragar 30 spoke fun! dang lucky. I like those 30 spokes. They cleaned up well for sure. If you get tired of them ship them too me ahahha __________________ ..Mac’s Garage.. 73 GMC, 54 Caddy, 2010 Silverado, 68 C10 RIP DAd My 73 GMC Truck Build Pic 2010 Silverado 4/6 on 24s IG:MacsGarage

07-24-2012, 08:13 PM	#22
richards72chevy Registered User Join Date: Dec 2010 Location: konawa ok/oakdale Ca. Posts: 1,648	Re: cragar 30 spoke fun! Now all you need is some metal flake on the roof.

07-24-2012, 09:13 PM	#24
richards72chevy Registered User Join Date: Dec 2010 Location: konawa ok/oakdale Ca. Posts: 1,648	Re: cragar 30 spoke fun! It would be easier to do just the roof.Unless you plan on taking out the front glass.Maybe some one can photo shop both styles for you.

Register or Log In To remove these advertisements.