NY 73-87 Truck Parts Clean Out - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Sarge261 · 10-20-2013, 06:45 PM

I have a few Square Body parts left from my build that I am selling off, after my brother passed away I just don't have the ambition to work on the truck any longer:

91 Chevy K5 Blazer complete front clip Core Support, Fenders (Aftermarket) 2 Hoods (1 is Aftermarket 1 is OEM), Grill, Trim, and Wiring Harness All for $600.00

87 K20 Turbo 400 Transmission, Rebuilt Heavy Duty, Never installed. $400.00

87 K20 Transfer Case NP 208 I believe. $200.00

2 Fuel Tanks with Brackets and Sending Units $200.00

87 K20 8' Pick up box, Driver Side Fuel Door (Square), No Rust, Primed SC Bed $1500.00

73-80 Energy Suspension Hyper Flex Complete Bushing Kit (Part # 318104R) $200.00

73-87 New In Box Back Rack Kit $200.00

91 Chevy K5 Blazer Steering Column with Steering Wheel (Tilt) $150.00

I have a few other things laying around so if its not listed I may have it here. Most of the bigger stuff I may not want to ship, but if your close Im willing to meet you. All prices are negotiable, so if they seem high I just don't know what they are worth.

Sarge

Sarge261 · 10-21-2013, 09:13 AM

No One ?

**VictoriaHardware** · 10-21-2013, 12:07 PM

How about wheels- OEM, 15x8, steel, 6 lug, 3 13/16 backspace. I need 2.

Sarge261 · 10-22-2013, 11:10 AM

No Wheels...Sorry

Sarge261 · 10-23-2013, 03:25 PM

TTT Couple Items Added

l1l · 10-24-2013, 05:00 AM

sorry about your brother , it must be a tragedy. may he rest on peace.

l1l · 10-24-2013, 05:01 AM

any rear sliding window?

Sarge261 · 10-24-2013, 08:21 AM

Sliding rear window is gone with the cab.

**ScottH** · 10-27-2013, 10:49 PM

Is tilt column for an auto or manual?

Thanks
Scott

Sarge261 · 10-28-2013, 02:46 PM

Scott Both are for Auto's

Alex V. · 11-02-2013, 02:35 AM

Would you consider shipping the 4x4 TH400?

Sarge261 · 11-03-2013, 08:35 PM

Im not so sure it would be worth it since you are all the way out in MO. By the time I build a crate and ship it I would think that you could get a core locally, have it rebuilt cheaper than this would be. Unless someone has some other idea?

Sarge

Alex V. · 11-04-2013, 01:32 AM

Good point - just curious.

Sarge261 · 11-04-2013, 02:25 PM

Not sure if you have a greyhound terminal near you, but that's the only way I think it may be kinda cost effective. But I would have to find out what they would require for a shipping container.

Sarge

Alex V. · 11-05-2013, 12:04 PM

That's not necessary at this point. I have a TH350 to rebuild, but am contemplating upgrading to a TH400 - neither one will happen for another month or better. I'm sure I can find one closer, but if for some reason I can't I may get back in touch with you.

Sarge261 · 11-05-2013, 01:41 PM

Very good, parts aren't moving too good around here so chances are I will still have it.

bigarmzz · 11-05-2013, 01:57 PM

"91 Chevy K5 Blazer complete front clip Core Support, Fenders (Aftermarket) 2 Hoods (1 is Aftermarket 1 is OEM), Grill, Trim, and Wiring Harness All for $600.00"

price shipped to 26241, only don't need the fenders and hoods. but all else is needed

got a buddy interested without internet, thanks

Sarge261 · 11-10-2013, 08:11 PM

Again the problem is how do I ship the core support? Are you close to a Gray hound terminal?

Sarge

RoughKuntry · 11-11-2013, 04:57 AM

Looking for a 73 Cab with Doors Need to rebuild my 73 Super Custom, cab is rotten and passed repair.

Brockwaykid · 11-11-2013, 10:51 AM

I have one but it is getting to the point where rust could be an issue. doors are rotten. but it is on a truck and staying there. lol

Sarge261 · 11-11-2013, 01:24 PM

Cab and Doors are long gone...

Hello for Albany NY Brockwaykid

Brockwaykid · 11-11-2013, 07:01 PM

Quote:

Originally Posted by Sarge261

Cab and Doors are long gone...

Hello for Albany NY Brockwaykid

jeez, i didnt even notice your location!

gotta love NY salt!

RoughKuntry · 11-12-2013, 06:41 AM

More Like West Coast Salt

Sarge261 · 11-12-2013, 02:40 PM

Yup,

I have a guy in Cobleskill I deal with so everything I get comes from down south.

The only body parts I have left are a real nice southern bed with a square driver side gas door. Its a 8 foot box, seems no one wants them though.

Sarge

Brockwaykid · 11-12-2013, 05:26 PM

8 footers are the way to go!

10-20-2013, 06:45 PM	#1
Sarge261 Registered User Join Date: Sep 2009 Location: Upstate NY Posts: 395	73-87 Truck Parts Clean Out I have a few Square Body parts left from my build that I am selling off, after my brother passed away I just don't have the ambition to work on the truck any longer: 91 Chevy K5 Blazer complete front clip Core Support, Fenders (Aftermarket) 2 Hoods (1 is Aftermarket 1 is OEM), Grill, Trim, and Wiring Harness All for $600.00 87 K20 Turbo 400 Transmission, Rebuilt Heavy Duty, Never installed. $400.00 87 K20 Transfer Case NP 208 I believe. $200.00 2 Fuel Tanks with Brackets and Sending Units $200.00 87 K20 8' Pick up box, Driver Side Fuel Door (Square), No Rust, Primed SC Bed $1500.00 73-80 Energy Suspension Hyper Flex Complete Bushing Kit (Part # 318104R) $200.00 73-87 New In Box Back Rack Kit $200.00 91 Chevy K5 Blazer Steering Column with Steering Wheel (Tilt) $150.00 I have a few other things laying around so if its not listed I may have it here. Most of the bigger stuff I may not want to ship, but if your close Im willing to meet you. All prices are negotiable, so if they seem high I just don't know what they are worth. Sarge __________________ 1997 GMC Yukon Western Mid Weight Plow Project THOR Last edited by Sarge261; 10-23-2013 at 03:25 PM.

10-21-2013, 09:13 AM	#2
Sarge261 Registered User Join Date: Sep 2009 Location: Upstate NY Posts: 395	Re: 73-87 Truck Parts Clean Out No One ? __________________ 1997 GMC Yukon Western Mid Weight Plow Project THOR

10-21-2013, 12:07 PM	#3
VictoriaHardware Senior Member Join Date: Nov 2012 Location: Southeast Michigan Posts: 783	Re: 73-87 Truck Parts Clean Out How about wheels- OEM, 15x8, steel, 6 lug, 3 13/16 backspace. I need 2.

10-22-2013, 11:10 AM	#4
Sarge261 Registered User Join Date: Sep 2009 Location: Upstate NY Posts: 395	Re: 73-87 Truck Parts Clean Out No Wheels...Sorry __________________ 1997 GMC Yukon Western Mid Weight Plow Project THOR

10-23-2013, 03:25 PM	#5
Sarge261 Registered User Join Date: Sep 2009 Location: Upstate NY Posts: 395	Re: 73-87 Truck Parts Clean Out TTT Couple Items Added __________________ 1997 GMC Yukon Western Mid Weight Plow Project THOR

10-24-2013, 05:00 AM	#6
l1l Registered User Join Date: Jun 2011 Location: FL Posts: 247	Re: 73-87 Truck Parts Clean Out sorry about your brother , it must be a tragedy. may he rest on peace.

10-24-2013, 05:01 AM	#7
l1l Registered User Join Date: Jun 2011 Location: FL Posts: 247	Re: 73-87 Truck Parts Clean Out any rear sliding window?

10-24-2013, 08:21 AM	#8
Sarge261 Registered User Join Date: Sep 2009 Location: Upstate NY Posts: 395	Re: 73-87 Truck Parts Clean Out Sliding rear window is gone with the cab. __________________ 1997 GMC Yukon Western Mid Weight Plow Project THOR

10-27-2013, 10:49 PM	#9
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: 73-87 Truck Parts Clean Out Is tilt column for an auto or manual? Thanks Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

10-28-2013, 02:46 PM	#10
Sarge261 Registered User Join Date: Sep 2009 Location: Upstate NY Posts: 395	Re: 73-87 Truck Parts Clean Out Scott Both are for Auto's __________________ 1997 GMC Yukon Western Mid Weight Plow Project THOR

11-02-2013, 02:35 AM	#11
Alex V. Registered User Join Date: Mar 2013 Location: Campbellsville, KY Posts: 888	Re: 73-87 Truck Parts Clean Out Would you consider shipping the 4x4 TH400? __________________ Alex V. ------ 1967 C10 Suburban, 350/NP435, Green/Green, PS, PB, HD cooling, charging, shocks, and springs. 1985 GMC C3500 SRW, Sierra Classic, 454/TH400, white/blue.

11-03-2013, 08:35 PM	#12
Sarge261 Registered User Join Date: Sep 2009 Location: Upstate NY Posts: 395	Re: 73-87 Truck Parts Clean Out Im not so sure it would be worth it since you are all the way out in MO. By the time I build a crate and ship it I would think that you could get a core locally, have it rebuilt cheaper than this would be. Unless someone has some other idea? Sarge __________________ 1997 GMC Yukon Western Mid Weight Plow Project THOR

11-04-2013, 01:32 AM	#13
Alex V. Registered User Join Date: Mar 2013 Location: Campbellsville, KY Posts: 888	Re: 73-87 Truck Parts Clean Out Good point - just curious. __________________ Alex V. ------ 1967 C10 Suburban, 350/NP435, Green/Green, PS, PB, HD cooling, charging, shocks, and springs. 1985 GMC C3500 SRW, Sierra Classic, 454/TH400, white/blue.

11-04-2013, 02:25 PM	#14
Sarge261 Registered User Join Date: Sep 2009 Location: Upstate NY Posts: 395	Re: 73-87 Truck Parts Clean Out Not sure if you have a greyhound terminal near you, but that's the only way I think it may be kinda cost effective. But I would have to find out what they would require for a shipping container. Sarge __________________ 1997 GMC Yukon Western Mid Weight Plow Project THOR

11-05-2013, 12:04 PM	#15
Alex V. Registered User Join Date: Mar 2013 Location: Campbellsville, KY Posts: 888	Re: 73-87 Truck Parts Clean Out That's not necessary at this point. I have a TH350 to rebuild, but am contemplating upgrading to a TH400 - neither one will happen for another month or better. I'm sure I can find one closer, but if for some reason I can't I may get back in touch with you. __________________ Alex V. ------ 1967 C10 Suburban, 350/NP435, Green/Green, PS, PB, HD cooling, charging, shocks, and springs. 1985 GMC C3500 SRW, Sierra Classic, 454/TH400, white/blue.



Register or Log In To remove these advertisements.

11-05-2013, 01:41 PM	#16
Sarge261 Registered User Join Date: Sep 2009 Location: Upstate NY Posts: 395	Re: 73-87 Truck Parts Clean Out Very good, parts aren't moving too good around here so chances are I will still have it. __________________ 1997 GMC Yukon Western Mid Weight Plow Project THOR

11-05-2013, 01:57 PM	#17
bigarmzz Registered User Join Date: Sep 2004 Location: Elkins, West Virginia Posts: 2,542	Re: 73-87 Truck Parts Clean Out "91 Chevy K5 Blazer complete front clip Core Support, Fenders (Aftermarket) 2 Hoods (1 is Aftermarket 1 is OEM), Grill, Trim, and Wiring Harness All for $600.00" price shipped to 26241, only don't need the fenders and hoods. but all else is needed got a buddy interested without internet, thanks

11-10-2013, 08:11 PM	#18
Sarge261 Registered User Join Date: Sep 2009 Location: Upstate NY Posts: 395	Re: 73-87 Truck Parts Clean Out Again the problem is how do I ship the core support? Are you close to a Gray hound terminal? Sarge __________________ 1997 GMC Yukon Western Mid Weight Plow Project THOR

11-11-2013, 04:57 AM	#19
RoughKuntry Registered User Join Date: Mar 2013 Location: Washington Posts: 238	Re: 73-87 Truck Parts Clean Out Looking for a 73 Cab with Doors Need to rebuild my 73 Super Custom, cab is rotten and passed repair. __________________ RoughKuntry 73 GMC 25 HUNDRED :Sold 79 GMC High Sierra 4x4 (Ma-Duece) :Sold 99 Chevrolet LS 4.8l/5 Speed Manual 4x4 :Selling 88 Chevrolet Burban 2500 4x4 :Buying

11-11-2013, 10:51 AM	#20
Brockwaykid Registered User Join Date: Mar 2013 Location: Granville NY Posts: 241	Re: 73-87 Truck Parts Clean Out I have one but it is getting to the point where rust could be an issue. doors are rotten. but it is on a truck and staying there. lol __________________ Jeff Shaw 2003 Chevy 2500HD LB7 Duramax

11-11-2013, 01:24 PM	#21
Sarge261 Registered User Join Date: Sep 2009 Location: Upstate NY Posts: 395	Re: 73-87 Truck Parts Clean Out Cab and Doors are long gone... Hello for Albany NY Brockwaykid __________________ 1997 GMC Yukon Western Mid Weight Plow Project THOR

11-12-2013, 06:41 AM	#23
RoughKuntry Registered User Join Date: Mar 2013 Location: Washington Posts: 238	Re: 73-87 Truck Parts Clean Out More Like West Coast Salt __________________ RoughKuntry 73 GMC 25 HUNDRED :Sold 79 GMC High Sierra 4x4 (Ma-Duece) :Sold 99 Chevrolet LS 4.8l/5 Speed Manual 4x4 :Selling 88 Chevrolet Burban 2500 4x4 :Buying

11-12-2013, 02:40 PM	#24
Sarge261 Registered User Join Date: Sep 2009 Location: Upstate NY Posts: 395	Re: 73-87 Truck Parts Clean Out Yup, I have a guy in Cobleskill I deal with so everything I get comes from down south. The only body parts I have left are a real nice southern bed with a square driver side gas door. Its a 8 foot box, seems no one wants them though. Sarge __________________ 1997 GMC Yukon Western Mid Weight Plow Project THOR

11-12-2013, 05:26 PM	#25
Brockwaykid Registered User Join Date: Mar 2013 Location: Granville NY Posts: 241	Re: 73-87 Truck Parts Clean Out 8 footers are the way to go! __________________ Jeff Shaw 2003 Chevy 2500HD LB7 Duramax

Register or Log In To remove these advertisements.