PA WTB list for my c20

[Theboatandcarman]

ok i became i premium member for this, lets see if its worth it! here is a small list of things i want to buy followed by a list of things i have to trade/sell. obviously i have cash
located around quakertown Pa area 19438
WTB list
-93-94 GM NV4500 transmission
-ho52 4.10 no spin rear section!!
-72 gas pedal with bolts

Sell/Trade list
-passenger side 68 fender (i guess fits gmc trucks also)
-high hump floor patch (the low floor metal, not the "hump" part)
-cowling under windshield
-cab cuts from my old cab/doors. cab is trashed in most areas though!!
-sm465 2wd trans, no bellhousing, unknown condition
-POL rear adjustable trackbar

thanks and i hope i can knock down my list

[Clatterville trolley]

Originally Posted by Theboatandcarman

ok i became i premium member for this, lets see if its worth it! here is a small list of things i want to buy followed by a list of things i have to trade/sell. obviously i have cash
located around quakertown Pa area 19438
WTB list
-rear 18" of c20 coil spring frame (crossmembers not needed) been searching for the past year for this....
-93-94 NV4500 transmission
-ho52 4.10 no spin rear section!!

Sell/Trade list
-passenger side 68 fender (i guess fits gmc trucks also)
-high hump floor patch (the low floor metal, not the "hump" part)
-cowling under windshield
-cab cuts from my old cab/doors. cab is trashed in most areas though!!
-sm465 2wd trans, no bellhousing, unknown condition
-POL rear adjustable trackbar

thanks and i hope i can knock down my list

I think I might be able to help you out on the rear portion of the C20 frame. I have one that I am not going to use - let me see what the last 18" looks like. I will get back with you with results. If it is what you want I would be interested in the 68 fender in trade if we can get together on values. Jay

[Theboatandcarman]

Originally Posted by Clatterville trolley

I think I might be able to help you out on the rear portion of the C20 frame. I have one that I am not going to use - let me see what the last 18" looks like. I will get back with you with results. If it is what you want I would be interested in the 68 fender in trade if we can get together on values. Jay

That sounds good to me, but the shipping would be killer on the fender.....

[GR8-68]

Is the c20 frame different from the c10 ?

[southern parts]

price and condition on the 67-68 grill pieces.

[EARNHARDT#3]

What year is the rad support? How much for it and the fender? I'm only an hour away.

[Theboatandcarman]

Originally Posted by southern parts

price and condition on the 67-68 grill pieces.

they are a friends, he said not for sale very sternly! haha

Originally Posted by EARNHARDT#3

What year is the rad support? How much for it and the fender? I'm only an hour away.

rad support is junk, gone. looking for 100 for fender, has some rust on inside of front section there. was from Arizona though!

[Theboatandcarman]

Originally Posted by GR8-68

Is the c20 frame different from the c10 ?

from what i understand the c20 has thicker metal

[Theboatandcarman]

ttt

[michael bustamante]

the c20 has a taller frame
I have a complete 72 deluxe pedal assy. set up for small block with a new cable. Id trade for the fender but ship would probably kill the deal

[Theboatandcarman]

Originally Posted by michael bustamante

the c20 has a taller frame
I have a complete 72 deluxe pedal assy. set up for small block with a new cable. Id trade for the fender but ship would probably kill the deal

Dang, I'd do that too! All the good stuff is never close....

[6772iron]

Originally Posted by Theboatandcarman

ok i became i premium member for this, lets see if its worth it! here is a small list of things i want to buy followed by a list of things i have to trade/sell. obviously i have cash
located around quakertown Pa area 19438
WTB list
-rear 18" of c20 coil spring frame (crossmembers not needed) been searching for the past year for this....
-93-94 GM NV4500 transmission
-ho52 4.10 no spin rear section!!
-front inner fenders, looking for new aftermarket ones assuming they actually fit right.....
-72 gas pedal with bolts

Sell/Trade list
-passenger side 68 fender (i guess fits gmc trucks also)
-high hump floor patch (the low floor metal, not the "hump" part)
-cowling under windshield
-cab cuts from my old cab/doors. cab is trashed in most areas though!!
-sm465 2wd trans, no bellhousing, unknown condition
-POL rear adjustable trackbar

thanks and i hope i can knock down my list

I have a 72 c20 super Cheyenne custom camper I am considering piecing out I am looking for an 72 auto 4x4 trans that can handle the 402 in c 20 if frame would work for you give me a shout

[Theboatandcarman]

Thanks, I have since found a frame section though someone on here! Other things are still needed!

[Theboatandcarman]

Weekend bump. Editing list down

[Undone]

Door bottoms any good?

[Theboatandcarman]

Originally Posted by Undone

Door bottoms any good?

Doors and cab are mostly junk

[Undone]

How about the rain gutters?

[Theboatandcarman]

Originally Posted by Undone

How about the rain gutters?

They're 90% rotted away. The cab and doors are only good if you need a small square of non usual areas that dont rust away

[zicc1835]

Originally Posted by michael Bustamante

the c20 has a taller frame
I have a complete 72 deluxe pedal assy. set up for small block with a new cable. Id trade for the fender but ship would probably kill the deal

Michael are you selling that pedal assy.?

[Theboatandcarman]

weekend bump. any no spin 4.10 ho52s out there??