'66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Frizzle Fry · 01-10-2010, 01:57 AM

Took a little break from metal manipulation this week to play with an idea I've been brewing - gotta just roll with the ADD inspired motivation sometimes...

I converted my OG speedo from manual to electronic.

Took it apart and added the needle actuator from the Acura RSX-S cluster (extra actuator shown at bottom of 1st image):

Surface mounted a jack on the RSX cluster PCB to enable remoting of the actuator:

I found a nylon nut for that upper stand-off after this shot was taken:

01-10-2010, 01:57 AM	#11
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... Took a little break from metal manipulation this week to play with an idea I've been brewing - gotta just roll with the ADD inspired motivation sometimes... I converted my OG speedo from manual to electronic. Took it apart and added the needle actuator from the Acura RSX-S cluster (extra actuator shown at bottom of 1st image): Surface mounted a jack on the RSX cluster PCB to enable remoting of the actuator: I found a nylon nut for that upper stand-off after this shot was taken: Last edited by Frizzle Fry; 01-10-2010 at 04:09 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.