My 1954 Chevy PickUp-truck - The 1947 - Present Chevrolet & GMC Truck Message Board Network

snoopy0775 · 06-07-2008, 12:40 AM

Quote:

Originally Posted by bad4587

Wow, that looks super sweet!!! Great job!! Whats you rim and tire set up?

i use a Torq Thrust II 8x18" rim with a 245/40/18 tire on the front and a 10x20" rim with a 275/35/20 tire on the rear

-Robin-

snoopy0775 · 08-16-2008, 02:53 AM

Hi guys...
one little update:

Yesterday i fixed my airride equipment behind rear axle...i make a aluminium-box which is powdercoated too. Sorry for bad pics....i only have my handy near to me. The hoses and later the elctric runs in a cable-channel to front of car, which i fixed with ultra strong hook-and-loop tape inside my frame-profile. So you don´t see any cables and hoses...and i haven´t got to drill the frame.
Perhaps you see the cabel-channel on pic below...the hook-and-loop tape was a little bit to wide -> thats the black line on pic.
Apart from that i still waiting for the headers... :-( ....it´s really frustrating.

Last week i ordered Hushpower II- Mufflers, Lokar dip-sticks, and vibrant exhaust-tips...yesterday i ordered a march-performance serpentine-kit for my engine....

Nice greetings from germany...sorry for my stupid english :-D

yours Robin

snoopy0775 · 08-16-2008, 02:58 AM

next pics

Daniel U · 08-16-2008, 03:00 AM

Where do you plan on putting the fuel tank? Clean work! I like your installation.

snoopy0775 · 08-16-2008, 03:52 AM

Quote:

Originally Posted by Daniel U

Where do you plan on putting the fuel tank? Clean work! I like your installation.

Thanks for compliment...the fuel tank will remain in the cab.

snoopy0775 · 10-25-2008, 02:49 AM

Hello to all of you,
long time since my last post....here are new pictures with work i´ve done yesterday...install the March-Pulley-Kit and the Doug Thorley headers.
I´ve been waiting 5 1/2 month for them to get....last week they´re finally arrived. Looks absolute great....next step will be to build the stainless-steel-exhaust system with the hushpower II-mufflers...keep you up-to-date

Greetings from germany,
Robin ;-)

snoopy0775 · 10-25-2008, 02:50 AM

..and another one..

63 & 64 Bowties · 10-25-2008, 07:11 AM

Wow, I'm speechless. B-E-A-U-T-I-F-U-L. But FIVE AND A HALF MONTHS to get an order???? Again....speechless.

08-16-2008, 02:53 AM	#2
snoopy0775 Registered User Join Date: Dec 2007 Location: Backnang / Germany Posts: 84	Re: My 1954 Chevy PickUp-truck Hi guys... one little update: Yesterday i fixed my airride equipment behind rear axle...i make a aluminium-box which is powdercoated too. Sorry for bad pics....i only have my handy near to me. The hoses and later the elctric runs in a cable-channel to front of car, which i fixed with ultra strong hook-and-loop tape inside my frame-profile. So you don´t see any cables and hoses...and i haven´t got to drill the frame. Perhaps you see the cabel-channel on pic below...the hook-and-loop tape was a little bit to wide -> thats the black line on pic. Apart from that i still waiting for the headers... :-( ....it´s really frustrating. Last week i ordered Hushpower II- Mufflers, Lokar dip-sticks, and vibrant exhaust-tips...yesterday i ordered a march-performance serpentine-kit for my engine.... Nice greetings from germany...sorry for my stupid english :-D yours Robin Attached Images

08-16-2008, 02:58 AM	#3
snoopy0775 Registered User Join Date: Dec 2007 Location: Backnang / Germany Posts: 84	Re: My 1954 Chevy PickUp-truck next pics Attached Images

08-16-2008, 03:00 AM	#4
Daniel U Registered User Join Date: Oct 2006 Location: Central Coast, CA. Posts: 1,202	Re: My 1954 Chevy PickUp-truck Where do you plan on putting the fuel tank? Clean work! I like your installation. __________________ Mom's 1954 (TBI 5.7/700R4/14 bolt 4:10) 5 Chevrolet window 3/4 ton long bed Pick up build thread ->http://www.67-72chevytrucks.com/vboa...d.php?t=228674 My 1954 (TPI 5.7/700R4/10 bolt 3:73) Chevrolet 5 window 1/2 ton short bed Pick up build thread->http://67-72chevytrucks.com/vboard/s...3&goto=newpost 1960 (400/T350/?) Apache 10 short/fleet side-big window 1973 (TPI 5.7/700R4/14 bolt 4:10 w DANA 60 front) Chevrolet Cheyenne 4X4 2013 (Vortec 5.3/6-speed 6L90 automatic) Sierra LT CREW CAB Doing my part to warm the globe

10-25-2008, 02:49 AM	#6
snoopy0775 Registered User Join Date: Dec 2007 Location: Backnang / Germany Posts: 84	Re: My 1954 Chevy PickUp-truck Hello to all of you, long time since my last post....here are new pictures with work i´ve done yesterday...install the March-Pulley-Kit and the Doug Thorley headers. I´ve been waiting 5 1/2 month for them to get....last week they´re finally arrived. Looks absolute great....next step will be to build the stainless-steel-exhaust system with the hushpower II-mufflers...keep you up-to-date Greetings from germany, Robin ;-) Attached Images

10-25-2008, 02:50 AM	#7
snoopy0775 Registered User Join Date: Dec 2007 Location: Backnang / Germany Posts: 84	Re: My 1954 Chevy PickUp-truck ..and another one.. Attached Images

10-25-2008, 07:11 AM	#8
63 & 64 Bowties and a few others Join Date: Jun 2007 Location: Blue Ridge Mountains of VA Posts: 5,638	Re: My 1954 Chevy PickUp-truck Wow, I'm speechless. B-E-A-U-T-I-F-U-L. But FIVE AND A HALF MONTHS to get an order???? Again....speechless. __________________ Bill US Army Vet -193rd Infantry BlueRidgeMuscleCars.com “The greatness of a nation and its moral progress can be judged by the way its animals are treated” Gandhi



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.