1969 SuperBurb build-up (Bagged and Blown!) - Page 38 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

CheyenneShop · 07-15-2010, 06:23 PM

Rob - LOVE the gauges, especially the 180 MPH. Your progress, and workmanship are spectacular!!!

**67cheby** · 07-15-2010, 06:29 PM

by the way , i thought you had the trim on ??

*project 67 sub* · 07-15-2010, 06:48 PM

Quote:

Originally Posted by theCheyenneShop

Rob - LOVE the gauges, especially the 180 MPH. Your progress, and workmanship are spectacular!!!

160mph

mcbassin · 07-15-2010, 06:53 PM

Those gauges look awesome! I know that you had that done a few years back, but you have a ballpark cost on just the gauges? Looks like a bunch of $$$.

+1 on the Mar-K stuff. I have used their stuff in the past with good results.

**Hart_Rod** · 07-15-2010, 08:15 PM

Quote:

Originally Posted by 67cheby

i have never been a big fan of these but in your application and with your taste i bet it would look great.... i cant think of another place to add guages that would look good

I think that will be the easiest way to add the gauges since everything else is already painted.

Quote:

Originally Posted by gcburdic

Hart....I think they are okay....but it's so unlike you to use the usual and not have something else custom

If everything wasn't painted.......

.

Quote:

Originally Posted by theCheyenneShop

Rob - LOVE the gauges, especially the 180 MPH. Your progress, and workmanship are spectacular!!!

Thanks! How's the blazer coming?

Quote:

Originally Posted by 67cheby

by the way , i thought you had the trim on ??

I just had it taped on to check the fit. I won't put the trim on until all of the body panels are on and aligned.

Quote:

Originally Posted by project 67 sub

160mph

Quote:

Originally Posted by mcbassin

Those gauges look awesome! I know that you had that done a few years back, but you have a ballpark cost on just the gauges? Looks like a bunch of $$$.

+1 on the Mar-K stuff. I have used their stuff in the past with good results.

I got the gauges from Summit. I think the total was around $550-$600. Here's some more pictures of the front brake lines going to the master cylinder, the Flaming River tilt column, the CPP steering shaft setup and my custom made glove box emblem,

.

Frizzle Fry · 07-15-2010, 08:56 PM

Holy...! That emblem is insane!

chevydog66 · 07-15-2010, 09:17 PM

Rob, I have a few questions. Hope you can share some of your wisdom.
You are using the ECE motor mounts correct? I am starting to install a LS2 in my 72 GMC truck. I also have the ECE mounts. What headers would you recommend, the Thorleys? I will be using a 200 4R trans, which is still in the truck. My LS2 is like a 01 or 02, and I would like to use the mechanical fan that's on it. I wonder if I can use it with the stock radiator? Why did you go electric, radiator to fan spacing?

**Hart_Rod** · 07-15-2010, 09:29 PM

Quote:

Originally Posted by Frizzle Fry

Holy...! That emblem is insane!

It was hand carved.....

.

Quote:

Originally Posted by chevydog66

Rob, I have a few questions. Hope you can share some of your wisdom.
You are using the ECE motor mounts correct? I am starting to install a LS2 in my 72 GMC truck. I also have the ECE mounts. What headers would you recommend, the Thorleys? I will be using a 200 4R trans, which is still in the truck. My LS2 is like a 01 or 02, and I would like to use the mechanical fan that's on it. I wonder if I can use it with the stock radiator? Why did you go electric, radiator to fan spacing?

I really like the Thorleys. If you look at my 67 Crewcab thread you can see where I used the mechanical fan with the 5.3 it put in it. You can use the factory radiator, but you'll have to figure out the hoses to make it work. Several people have done it on t his board. Here's a good thread to check out:

http://67-72chevytrucks.com/vboard/s...d.php?t=377348

chevydog66 · 07-15-2010, 10:03 PM

Thanks Rob, ya I just found that LS swap subforum. Keep up the good work!! We all want to see the finished 'Burb. Maybe at a board meet someday.

**Hart_Rod** · 07-15-2010, 10:41 PM

Quote:

Originally Posted by chevydog66

Thanks Rob, ya I just found that LS swap subforum. Keep up the good work!! We all want to see the finished 'Burb. Maybe at a board meet someday.

Any time. Let me know if you have any more questions. Got one more thing done. Here's some pictures of the LOKAR shift linkage hooked up to the tilt.

R/

Ricks' 72C10 · 07-16-2010, 12:36 AM

Rob,

Where did you get the temp sender bushing?

All looks good

Thanks

mcbassin · 07-16-2010, 12:45 AM

thanks for the info on the gauges. I was thinking it would cost more than that.

Quote:

Originally Posted by Hart_Rod

It was hand carved.....

.
[/url]

Wow! that took some serious time! Just curious what material did you use to make that from?
Have I mentioned this burb is way over the top.

VA72C10 · 07-16-2010, 01:04 AM

Awesome as usual but that glovebox emblem.....WOW.....just.......WOW!

Jvsapp · 07-16-2010, 03:49 AM

Quote:

Originally Posted by Hart_Rod

Here's some pictures of the glass and a couple of pictures of my solution to putting the temperature sender in the passengers side head. It's a 1/8 npt to 12mm 1.5 bushing. It beats drilling and retapping the head and it's not as bulky as the adapters most people use.

i like that. where did you get the sending unit? will it work with stock GM gauges? i like to tap mine into the plug on the intake by the water neck. i seen it on a factory impala so i stole that idea.

**Hart_Rod** · 07-16-2010, 05:48 AM

Quote:

Originally Posted by Ricks' 72C10

Rob,

Where did you get the temp sender bushing?

All looks good

Thanks

I ordered them from Dakota Digital. They were $2 each + shipping.

Quote:

Originally Posted by mcbassin

thanks for the info on the gauges. I was thinking it would cost more than that.

Wow! that took some serious time! Just curious what material did you use to make that from?
Have I mentioned this burb is way over the top.

That didn't include the cost of the bezel or having it assembled, just the gauges. I didn't make the emblem, I had a boardmember MrGoodplierss make it for me.

Quote:

Originally Posted by VA72C10

Awesome as usual but that glovebox emblem.....WOW.....just.......WOW!

Quote:

Originally Posted by Jvsapp

i like that. where did you get the sending unit? will it work with stock GM gauges? i like to tap mine into the plug on the intake by the water neck. i seen it on a factory impala so i stole that idea.

Thanks. The sending unit came with the gauges and the bushing came from Dakota Digital. I'm not sure if it will work with the stock gauges.

hgs_notes · 07-16-2010, 08:53 AM

Quote:

Originally Posted by Hart_Rod

I know I need a boost gauge, but I have two other holes to fill, any suggestions?

Tranny temp, vacuum?

mcbassin · 07-16-2010, 09:39 AM

Quote:

Originally Posted by Hart_Rod

That didn't include the cost of the bezel or having it assembled, just the gauges. I didn't make the emblem, I had a boardmember MrGoodplierss make it for me.

Cool! I like the way you are spreading the love on this project all over the board. Let me know if I can make something for you too

CheyenneShop · 07-16-2010, 02:38 PM

Thanks! How's the blazer coming?

Blazer(s) are doing about as good as your's!!!!

That hand engraved emblem is out of this world sick!

Ronnie

**Hart_Rod** · 07-17-2010, 06:03 AM

Quote:

Originally Posted by hgs_notes

Tranny temp, vacuum?

One gauge will be a dual boost/vac. I've already got tranny temp. I was thinking wideband and oil temp?

Quote:

Originally Posted by mcbassin

Cool! I like the way you are spreading the love on this project all over the board. Let me know if I can make something for you too

I'm open for ideas,

.

Quote:

Originally Posted by theCheyenneShop

That hand engraved emblem is out of this world sick!

Ronnie

Thanks Ronnie. I'm looking forward to seeing your build thread.

R/

**lolife99** · 07-17-2010, 08:24 AM

Quote:

Originally Posted by mcbassin

Cool! I like the way you are spreading the love on this project all over the board. Let me know if I can make something for you too

How about some billet Coys centercaps?

mcbassin · 07-17-2010, 02:13 PM

Quote:

Originally Posted by lolife99

How about some billet Coys centercaps?

I'm your huckleberry

**Hart_Rod** · 07-17-2010, 03:54 PM

Quote:

Originally Posted by lolife99

How about some billet Coys centercaps?

Quote:

Originally Posted by mcbassin

I'm your huckleberry

Some caps with SB on them would be SUPER COOL!!!

**Hart_Rod** · 07-18-2010, 04:11 PM

Here are a few pictures of the modification I did to my "drive by wire" gas pedal that allowed me to install a stock 72 CST pedal in it's place. I also got all the steering linkage cut and connected.

**Hart_Rod** · 07-18-2010, 10:26 PM

Here are some pictures of what the inside of a "NEW" engine looks like when I pulled the valve cover,

. I'm thinking about painting the valve covers, but I can't decide between red or black???? Also, any suggestions to where to install a oil temperature sender for a 4L60E? TIA.

R/

VA72C10 · 07-18-2010, 10:28 PM

Man, you know how to test a man's willpower from coveting.

07-15-2010, 06:23 PM	#926
CheyenneShop Registered User Join Date: Feb 2008 Location: Arizona Posts: 638	Re: 1969 SuperBurb build-up (Bagged and Blown!) Rob - LOVE the gauges, especially the 180 MPH. Your progress, and workmanship are spectacular!!! __________________ 72 Cheyenne shorty "*CheyLow" 72 3/4 long 4X4 69 SWB "Prospector" 68 C/10 shorty - "Picacho"* http://67-72chevytrucks.com/vboard/s...d.php?t=428379 *sold to "93redsled"* Have you heard about *C10 Talk? C10 Talk* is a podcast all about C10 Trucks, the builders, the vendors, and most importantly the C10 Community. Check us out online at www.c10talk.com

07-15-2010, 06:29 PM	#927
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 1969 SuperBurb build-up (Bagged and Blown!) by the way , i thought you had the trim on ?? __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

07-15-2010, 06:53 PM	#929
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: 1969 SuperBurb build-up (Bagged and Blown!) Those gauges look awesome! I know that you had that done a few years back, but you have a ballpark cost on just the gauges? Looks like a bunch of $$$. +1 on the Mar-K stuff. I have used their stuff in the past with good results. __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

07-15-2010, 08:56 PM	#931
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: 1969 SuperBurb build-up (Bagged and Blown!) Holy...! That emblem is insane!

07-15-2010, 09:17 PM	#932
chevydog66 GM ONLY BABY!!! Join Date: Oct 2003 Location: Fort Wayne, IN. Posts: 1,998	Re: 1969 SuperBurb build-up (Bagged and Blown!) Rob, I have a few questions. Hope you can share some of your wisdom. You are using the ECE motor mounts correct? I am starting to install a LS2 in my 72 GMC truck. I also have the ECE mounts. What headers would you recommend, the Thorleys? I will be using a 200 4R trans, which is still in the truck. My LS2 is like a 01 or 02, and I would like to use the mechanical fan that's on it. I wonder if I can use it with the stock radiator? Why did you go electric, radiator to fan spacing? __________________ 2 wrongs don't make a right, but 3 lefts do. 66 Chevelle Malibu 406ci, 573hp, 10.99@121mph 96 Chevy Silverado Z71 72 GMC 1500 Super Custom LS 6.0/4L65 on airride http://www.cardomain.com/ride/707879...mc-c-k-pick-up

07-15-2010, 10:03 PM	#934
chevydog66 GM ONLY BABY!!! Join Date: Oct 2003 Location: Fort Wayne, IN. Posts: 1,998	Re: 1969 SuperBurb build-up (Bagged and Blown!) Thanks Rob, ya I just found that LS swap subforum. Keep up the good work!! We all want to see the finished 'Burb. Maybe at a board meet someday. __________________ 2 wrongs don't make a right, but 3 lefts do. 66 Chevelle Malibu 406ci, 573hp, 10.99@121mph 96 Chevy Silverado Z71 72 GMC 1500 Super Custom LS 6.0/4L65 on airride http://www.cardomain.com/ride/707879...mc-c-k-pick-up

07-16-2010, 12:36 AM	#936
Ricks' 72C10 Going Down? Join Date: Jun 2009 Location: Rocky Point Posts: 157	Re: 1969 SuperBurb build-up (Bagged and Blown!) Rob, Where did you get the temp sender bushing? All looks good Thanks __________________ Just another day in Paradise Rebuild thread http://67-72chevytrucks.com/vboard/s...d.php?t=354512

07-16-2010, 01:04 AM	#938
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: 1969 SuperBurb build-up (Bagged and Blown!) Awesome as usual but that glovebox emblem.....WOW.....just.......WOW! __________________ Looking for a 67-72 swb or blazer project in or around VA.

07-16-2010, 02:38 PM	#943
CheyenneShop Registered User Join Date: Feb 2008 Location: Arizona Posts: 638	Re: 1969 SuperBurb build-up (Bagged and Blown!) Thanks! How's the blazer coming? Blazer(s) are doing about as good as your's!!!! That hand engraved emblem is out of this world sick! Ronnie __________________ 72 Cheyenne shorty "*CheyLow" 72 3/4 long 4X4 69 SWB "Prospector" 68 C/10 shorty - "Picacho"* http://67-72chevytrucks.com/vboard/s...d.php?t=428379 *sold to "93redsled"* Have you heard about *C10 Talk? C10 Talk* is a podcast all about C10 Trucks, the builders, the vendors, and most importantly the C10 Community. Check us out online at www.c10talk.com

07-18-2010, 04:11 PM	#948
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,835	Re: 1969 SuperBurb build-up (Bagged and Blown!) Here are a few pictures of the modification I did to my "drive by wire" gas pedal that allowed me to install a stock 72 CST pedal in it's place. I also got all the steering linkage cut and connected. Attached Images __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

07-18-2010, 10:26 PM	#949
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,835	Re: 1969 SuperBurb build-up (Bagged and Blown!) Here are some pictures of what the inside of a "NEW" engine looks like when I pulled the valve cover, . I'm thinking about painting the valve covers, but I can't decide between red or black???? Also, any suggestions to where to install a oil temperature sender for a 4L60E? TIA. R/ Attached Images __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3 Last edited by Hart_Rod; 07-18-2010 at 10:27 PM.

07-18-2010, 10:28 PM	#950
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: 1969 SuperBurb build-up (Bagged and Blown!) Man, you know how to test a man's willpower from coveting. __________________ Looking for a 67-72 swb or blazer project in or around VA.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.