MN Now Parting 1967 Chevy CST!!!! - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mexgrhd68 · 06-28-2011, 03:57 PM

how much for the gear indicator that screws onto steering column to 93277??

**daddymoo2** · 06-28-2011, 04:03 PM

Hi, I would like to buy the kick down switch thingy and bracket 39.00.That mounts on carb stud with the spliced wire. Let me know were to send payment. Thanks DON

Vintage Windmills · 06-28-2011, 04:56 PM

Quote:

Originally Posted by tac106842

Could you post a couple pics of the frame horns? Your price is fair, on the horns and small brackets. Thanks.

Where exactly do you want me to cut them off?

tac106842 · 06-28-2011, 05:02 PM

Cut them off right in front of the radiator support would be great. This will give me enought material to cut and weld them back to the original dimensions. Thanks.

Vintage Windmills · 06-28-2011, 08:42 PM

Renokeene- PM sent on choke stem

mexgrhd68- $10 shipped on indicator

daddymoo2- about the kickdown, waiting to hear from botomfdr1 to see if he will take it. He posted earlier but if he doesn't respond by tomorrow afternoon its yours.

Working on pics of the exterior mirrors and door handles

Jud

Vintage Windmills · 06-28-2011, 11:20 PM

Pics of door handles- again, the chrome isn't good. $24 shipped.

Mirrors have good glass but need to be sandblasted and repainted. No bends. $30 plus shipping.

bmfm64 · 06-28-2011, 11:29 PM

Can I get a pic of the plates? Any idea what year they're from? I'll take them pending pics. Also paypal ok?

Vintage Windmills · 06-28-2011, 11:43 PM

Quote:

Originally Posted by bmfm64

Can I get a pic of the plates? Any idea what year they're from? I'll take them pending pics. Also paypal ok?

paypal is good. Plates are from late 80's I'd guess since last tabs are from early 90's Front is beatup more than rear.

1971short4X4 · 06-28-2011, 11:55 PM

Hi. Just checking back. Did Eric pass on the ignition spacer and switch? I could really use it
Thanks
Posted via Mobile Device

**too much stuff** · 06-28-2011, 11:59 PM

Quote:

Originally Posted by 1971short4X4

Hi. Just checking back. Did Eric pass on the ignition spacer and switch? I could really use it
Thanks
Posted via Mobile Device

Sorry, i sent him a PM and said i would take it. I may have an extra spacer here. I will let you know if i do.

mexgrhd68 · 06-29-2011, 12:37 AM

Quote:

Originally Posted by Vintage Windmills

Renokeene- PM sent on choke stem

mexgrhd68- $10 shipped on indicator

daddymoo2- about the kickdown, waiting to hear from botomfdr1 to see if he will take it. He posted earlier but if he doesn't respond by tomorrow afternoon its yours.

Working on pics of the exterior mirrors and door handles

Jud

Hey vintage, how much for the whole set...the indicator, lens, and housing to 93277??? id like to have the whole set, plz.

**special-K** · 06-29-2011, 07:12 AM

I'll take the door handles. PM your info and I'll send payment.

**STP67-72** · 06-29-2011, 07:55 AM

Ill pass on the seat belts. But if choke ass. gets to me i will take it. With or with the knob. I will take all knobs if not sold.
Sorry for delay, i have been working lots of OT.

**RenoKeene** · 06-29-2011, 08:02 AM

Quote:

Originally Posted by RenoKeene

I'll take the choke setup without the knob, PM me for payment. Thanks

Payment sent.
Thanks

**RenoKeene** · 06-29-2011, 08:06 AM

I'll get in line behind Paul for the trim, if you decide to sell it.

67gmcstepside · 06-29-2011, 08:09 AM

I would need the piece that connects the door lock to the linage. Would you be willing to sell the locks?

67gmcstepside · 06-29-2011, 08:11 AM

67GMC stepside,
I don't know when it last ran but would guess years. It cranks over nicely now but has no spark. I don't know what those items would be worth. Make an offer.

50 for plus the linkage? If to cheap throw a price back at me. I am not sure of the value either.

bmfm64 · 06-29-2011, 09:01 AM

Pm me your paypal and I'll get it out this afternoon.

Vintage Windmills · 06-29-2011, 09:20 AM

Quote:

Originally Posted by tac106842

Cut them off right in front of the radiator support would be great. This will give me enought material to cut and weld them back to the original dimensions. Thanks.

Is it ok to cut to the front side of the core support brackets that are riveted on?

Quote:

Originally Posted by mexgrhd68

Hey vintage, how much for the whole set...the indicator, lens, and housing to 93277??? id like to have the whole set, plz.

Let me check condition tonight

Quote:

Originally Posted by special-K

I'll take the door handles. PM your info and I'll send payment.

Handles are yours PM sent

Quote:

Originally Posted by STP67-72

Ill pass on the seat belts. But if choke ass. gets to me i will take it. With or with the knob. I will take all knobs if not sold.
Sorry for delay, i have been working lots of OT.

choke assembly sold. All knobs including choke are yours, sending PM

Quote:

Originally Posted by 67gmcstepside

I would need the piece that connects the door lock to the linage. Would you be willing to sell the locks?

Door locks not available. Can you describe the piece(s) you need for the mechanism?

Quote:

Originally Posted by 67gmcstepside

67GMC stepside,
50 for plus the linkage? If to cheap throw a price back at me. I am not sure of the value either.

The throttle linkage on top of manifold? How's $95 shipped for carb with linkage, intake manifold, air cleaner parts sound?

Quote:

Originally Posted by bmfm64

Pm me your paypal and I'll get it out this afternoon.

PM sent

faribran · 06-29-2011, 09:31 AM

is the steering column (with wheel, horn button) available? if so how much to 36301

Vintage Windmills · 06-29-2011, 09:36 AM

Quote:

Originally Posted by faribran

is the steering column (with wheel, horn button) available? if so how much to 36301

Yes, but I think someone else is getting the shift indicator stuff. The turn signal mech is broke and the shifter is tight from rust. I'd sell whats left if your interested for $54 shipped (not including steering wheel cap but including wheel and horn guts)

faribran · 06-29-2011, 02:04 PM

thanks for being honest... i really think i will pass..... need one that has no rust... thanks

**daddymoo2** · 06-29-2011, 06:04 PM

Vintage: Have you heard from other member about the kick down thingy and brackets. Would like to send payment asap. Thanks Don

Vintage Windmills · 06-29-2011, 06:47 PM

Quote:

Originally Posted by daddymoo2

Vintage: Have you heard from other member about the kick down thingy and brackets. Would like to send payment asap. Thanks Don

Nope, its yours, PM sent

**michael bustamante** · 06-29-2011, 07:04 PM

Do you still have the radio knobs?

06-28-2011, 03:57 PM	#51
mexgrhd68 Registered User Join Date: Apr 2007 Location: Visalia, CA. Posts: 327	Re: Now Parting 1967 Chevy CST!!!! how much for the gear indicator that screws onto steering column to 93277?? __________________ 68 c-10 1/2 ton swb fleetside, 79 GMC Sierra Grande 1/2 ton swb fleetside, 99 Dodge Durango 4x4(wifes ride),53 and 55 chevy trucks(dads trucks ) 54 caddy 62 series 4 door(younger sons ride, aka 54caddy ) 70 caddy 2 door, 89 chevy silverado stepside(older sons rides )

06-28-2011, 04:03 PM	#52
daddymoo2 Senior Member Join Date: Mar 2010 Location: union,ky Posts: 1,551	Re: Now Parting 1967 Chevy CST!!!! Hi, I would like to buy the kick down switch thingy and bracket 39.00.That mounts on carb stud with the spliced wire. Let me know were to send payment. Thanks DON

06-28-2011, 05:02 PM	#54
tac106842 Registered User Join Date: Mar 2010 Location: Van Buren, ohio Posts: 69	Re: Now Parting 1967 Chevy CST!!!! Cut them off right in front of the radiator support would be great. This will give me enought material to cut and weld them back to the original dimensions. Thanks.

06-28-2011, 08:42 PM	#55
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: Now Parting 1967 Chevy CST!!!! Renokeene- PM sent on choke stem mexgrhd68- $10 shipped on indicator daddymoo2- about the kickdown, waiting to hear from botomfdr1 to see if he will take it. He posted earlier but if he doesn't respond by tomorrow afternoon its yours. Working on pics of the exterior mirrors and door handles Jud __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

06-28-2011, 11:20 PM	#56
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: Now Parting 1967 Chevy CST!!!! Pics of door handles- again, the chrome isn't good. $24 shipped. Mirrors have good glass but need to be sandblasted and repainted. No bends. $30 plus shipping. Attached Images __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6 Last edited by Vintage Windmills; 06-28-2011 at 11:21 PM.

06-28-2011, 11:29 PM	#57
bmfm64 Registered User Join Date: May 2011 Location: Covington, Wa Posts: 5,240	Re: Now Parting 1967 Chevy CST!!!! Can I get a pic of the plates? Any idea what year they're from? I'll take them pending pics. Also paypal ok?

06-28-2011, 11:55 PM	#59
1971short4X4 Registered User Join Date: Nov 2001 Location: Mission Viejo, Ca Posts: 377	Re: Now Parting 1967 Chevy CST!!!! Hi. Just checking back. Did Eric pass on the ignition spacer and switch? I could really use it Thanks Posted via Mobile Device

06-29-2011, 07:12 AM	#62
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: Now Parting 1967 Chevy CST!!!! I'll take the door handles. PM your info and I'll send payment. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

06-29-2011, 07:55 AM	#63
STP67-72 Senior Member Join Date: Jan 2002 Location: PORT NECHES, TEXAS / USA Posts: 1,664	Re: Now Parting 1967 Chevy CST!!!! Ill pass on the seat belts. But if choke ass. gets to me i will take it. With or with the knob. I will take all knobs if not sold. Sorry for delay, i have been working lots of OT. __________________ 55 Chevy original swb (big back window) 61 Chevy bubble top (427-5 speed) 67 Chevy stepside (Krusty) 68 Chevy swb fleet (Lola) 68 Chevy swb fleet 71 Chevy swb fleet ( future PB project) 97 crew cab power stroke 07 SS Trail blazer

06-29-2011, 08:06 AM	#65
RenoKeene Florida Edition Join Date: Oct 2010 Location: Fruitland Park, FL Posts: 4,011	Re: Now Parting 1967 Chevy CST!!!! I'll get in line behind Paul for the trim, if you decide to sell it. __________________ 70 GMC Short Stepside "Rose"-An American Beauty: Factory 402/TH400, AM/FM, AC, Tilt, Tach, Buckets, Posi, PS, PB, 3-5 Drop, Complete Resto-Rod 67 C-20 Slant Back Wrecker "Mad Max" 67 C-10 Ratrod "Step-N-Wolf" 71 Serro Scotty Sportsman camper "Scotty" 97 LT1 Z28 "The Hornet" Link to more pics of "Rose" http://67-72chevytrucks.com/vboard/a...p?albumid=1684 Check out my "Cheap Tricks" thread and add to it if you can, lots of good info there. http://67-72chevytrucks.com/vboard/s...d.php?t=489394

06-29-2011, 08:09 AM	#66
67gmcstepside Registered User Join Date: Jan 2010 Location: jackson Posts: 676	Re: Now Parting 1967 Chevy CST!!!! I would need the piece that connects the door lock to the linage. Would you be willing to sell the locks?

06-29-2011, 08:11 AM	#67
67gmcstepside Registered User Join Date: Jan 2010 Location: jackson Posts: 676	Re: Now Parting 1967 Chevy CST!!!! 67GMC stepside, I don't know when it last ran but would guess years. It cranks over nicely now but has no spark. I don't know what those items would be worth. Make an offer. 50 for plus the linkage? If to cheap throw a price back at me. I am not sure of the value either.

06-29-2011, 09:01 AM	#68
bmfm64 Registered User Join Date: May 2011 Location: Covington, Wa Posts: 5,240	Re: Now Parting 1967 Chevy CST!!!! Pm me your paypal and I'll get it out this afternoon.

06-29-2011, 09:31 AM	#70
faribran Registered User Join Date: Jul 2005 Location: AL Posts: 1,828	Re: Now Parting 1967 Chevy CST!!!! is the steering column (with wheel, horn button) available? if so how much to 36301 __________________ "

06-29-2011, 02:04 PM	#72
faribran Registered User Join Date: Jul 2005 Location: AL Posts: 1,828	Re: Now Parting 1967 Chevy CST!!!! thanks for being honest... i really think i will pass..... need one that has no rust... thanks __________________ "



Register or Log In To remove these advertisements.

06-29-2011, 06:04 PM	#73
daddymoo2 Senior Member Join Date: Mar 2010 Location: union,ky Posts: 1,551	Re: Now Parting 1967 Chevy CST!!!! Vintage: Have you heard from other member about the kick down thingy and brackets. Would like to send payment asap. Thanks Don

06-29-2011, 07:04 PM	#75
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,832	Re: Now Parting 1967 Chevy CST!!!! Do you still have the radio knobs? __________________ 1967custom

Register or Log In To remove these advertisements.