'66 Sunbeam Minx Project - F20C/6sp/4-link/Discs...

[ERASER5]

I know you are using the Honda S2000 rotors on the D-44, but what calipers and what mounting plates are you going to use? Also,how many bolts do the retainers use?

[Jvsapp]

that 4 link is giving me ideas for my morris build. it's probably the same width as your minx....

[Frizzle Fry]

Originally Posted by Rokcrln

It sure is nice to find a company like that these days. This car is turning out great.

Kevin
LFD Inc.

It sure is.

Originally Posted by ERASER5

I know you are using the Honda S2000 rotors on the D-44, but what calipers and what mounting plates are you going to use? Also,how many bolts do the retainers use?

I will make my own brackets to adapt the S2000 calipers. The theme here is to use as many mechanical parts from one donor as possible. That way future maintenance will be simplified and the huge selection of aftermarket upgrades are a simple bolt-on affair. I'll have to check the retainer bolt count.

Originally Posted by Jvsapp

that 4 link is giving me ideas for my morris build. it's probably the same width as your minx....

Be sure to post a build thread when you do!

[Jvsapp]

Originally Posted by Frizzle Fry

I will make my own brackets to adapt the S2000 calipers. The theme here is to use as many mechanical parts from one donor as possible. That way future maintenance will be simplified and the huge selection aftermarket upgrades are a simple bolt-on affair. I'll have to check the retainer bolt count.

Be sure to post a build thread when you do!

that is the key, totally. with my project 20V swap i already have that problem. motor was only made in japan and Australia so i had to order a replacement timing belt from Australia before i get the motor in.

and yes once i start the morris i will be posting pics.