NY 6 cylinder 250 parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**k5blazin** · 06-14-2010, 08:49 PM

whole or parts..runs good let me know what you need. dual exhaust headder!

Field and Son · 06-14-2010, 08:52 PM

How much for the power steering pump and brackets as well as the exhaust?

**k5blazin** · 06-14-2010, 09:28 PM

looks like the power steering bracket was altered to work with the headder, if i remeber correctly. $100 for both plus shipping

72BlckButy · 06-14-2010, 09:34 PM

Can you show pictures of the altered p/s bracket?

**k5blazin** · 06-14-2010, 09:36 PM

i will be able get some tomorrow!

Field and Son · 06-14-2010, 09:58 PM

I am going to pass...Thanks

72BlckButy · 06-14-2010, 10:05 PM

Would like to see some pics of the p/s brackets/pulleys.

Price for all the p/s items?

Interested...

LarryMcK9 · 06-15-2010, 06:17 AM

I am interested in the TH350 throttle bracket, how much? The picture is not too clear but do you have the carb linkage bracket to go with it?

Thanks, Larry M McKinley

**70STOVEBOLT** · 06-15-2010, 07:33 AM

Interested in the flame arrestor and tube/hose. Let me know total with shipping to 46562Thanks.

**70STOVEBOLT** · 06-15-2010, 07:38 AM

Also, lifting brackets, and dipstick.

FL71C10 · 06-15-2010, 09:38 AM

How much for the header, and all the ps parts?

dabruce15 · 06-15-2010, 11:44 AM

How much for the carb riser and tube?

**k5blazin** · 06-15-2010, 09:52 PM

$135 shipped for p/s with header

**k5blazin** · 06-15-2010, 09:58 PM

carb riser and hose $45 shipped

dabruce15 · 06-15-2010, 11:23 PM

Quote:

Originally Posted by k5blazin

carb riser and hose $45 shipped

Good deal, how do you want payment?

**k5blazin** · 06-16-2010, 10:30 AM

i only accept paypal. please send email address and i will send a payment request

FL71C10 · 06-16-2010, 10:31 AM

How much for the PS setup without the headers. What mods were done on the ps bracket to clear the headers? Do you know what kind of headers they are? Trying to make sure they will fit my 71 c10 with 6 cyl 3 speed.

Thanks!

dabruce15 · 06-16-2010, 11:50 AM

Quote:

Originally Posted by k5blazin

i only accept paypal. please send email address and i will send a payment request

dabruce15@yahoo.com

**k5blazin** · 06-16-2010, 09:34 PM

some more pics! powersteering pump is sold, i still have the brackets. pic shows the modification to clear header!

FL71C10 · 06-16-2010, 10:41 PM

Could I get a price on the ps setup without the header?

Thanks!

seadonkey · 06-16-2010, 11:01 PM

How about the HEI setup, what would ya have to have for it shipped to a 54469 area code.

**70STOVEBOLT** · 06-17-2010, 09:13 AM

I'll pass on the lifting brackets and dipstick. I had also asked about the flame arrestor (carb riser) and tube/hose, but it looks like dabruce15 got that.

dabruce15 · 06-17-2010, 11:35 AM

Quote:

Originally Posted by 70STOVEBOLT

I'll pass on the lifting brackets and dipstick. I had also asked about the flame arrestor (carb riser) and tube/hose, but it looks like dabruce15 got that.

70STOVEBOLT, check out this thread: http://www.67-72chevytrucks.com/vboa...d.php?t=407868, he's got a good deal on the riser and tube, $20 plus shipping.

**70STOVEBOLT** · 06-17-2010, 12:22 PM

dabruce15, thanks for the the tip, I'll check it out. What's the deal with the different heights? I have only ever seen the tall one before.

STINEY · 06-17-2010, 01:25 PM

Are you parting with the clutch linkage stuff? Interested in everything including the block mount & frame pivot, z-bar, etc.

Shipped to 44820

Thanks!

06-14-2010, 08:49 PM	#1
k5blazin Senior Member Join Date: Oct 2009 Location: potsdam ny Posts: 401	6 cylinder 250 parts whole or parts..runs good let me know what you need. dual exhaust headder! Attached Images

06-14-2010, 08:52 PM	#2
Field and Son Registered User Join Date: Nov 2008 Location: Fond du Lac, Wisconsin Posts: 425	Re: 6 cylinder 250 parts How much for the power steering pump and brackets as well as the exhaust?

06-14-2010, 09:28 PM	#3
k5blazin Senior Member Join Date: Oct 2009 Location: potsdam ny Posts: 401	Re: 6 cylinder 250 parts looks like the power steering bracket was altered to work with the headder, if i remeber correctly. $100 for both plus shipping

06-14-2010, 09:34 PM	#4
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: 6 cylinder 250 parts Can you show pictures of the altered p/s bracket? __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

06-14-2010, 09:36 PM	#5
k5blazin Senior Member Join Date: Oct 2009 Location: potsdam ny Posts: 401	Re: 6 cylinder 250 parts i will be able get some tomorrow!

06-14-2010, 09:58 PM	#6
Field and Son Registered User Join Date: Nov 2008 Location: Fond du Lac, Wisconsin Posts: 425	Re: 6 cylinder 250 parts I am going to pass...Thanks

06-14-2010, 10:05 PM	#7
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: 6 cylinder 250 parts Would like to see some pics of the p/s brackets/pulleys. Price for all the p/s items? Interested... __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package) Last edited by 72BlckButy; 06-14-2010 at 10:05 PM.

06-15-2010, 06:17 AM	#8
LarryMcK9 Registered User Join Date: Apr 2009 Location: Cumming, Ga Posts: 37	Re: 6 cylinder 250 parts I am interested in the TH350 throttle bracket, how much? The picture is not too clear but do you have the carb linkage bracket to go with it? Thanks, Larry M McKinley

06-15-2010, 07:33 AM	#9
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,233	Re: 6 cylinder 250 parts Interested in the flame arrestor and tube/hose. Let me know total with shipping to 46562Thanks. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

06-15-2010, 07:38 AM	#10
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,233	Re: 6 cylinder 250 parts Also, lifting brackets, and dipstick. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

06-15-2010, 09:38 AM	#11
FL71C10 Registered User Join Date: Jun 2010 Location: Orlando, Florida Posts: 2,508	Re: 6 cylinder 250 parts How much for the header, and all the ps parts?

06-15-2010, 11:44 AM	#12
dabruce15 Registered User Join Date: Mar 2009 Location: Chatsworth, CA Posts: 236	Re: 6 cylinder 250 parts How much for the carb riser and tube? __________________ Beauty is in the eye of the beer-holder. Praise the lowered! Last edited by dabruce15; 06-15-2010 at 11:47 AM.

06-15-2010, 09:52 PM	#13
k5blazin Senior Member Join Date: Oct 2009 Location: potsdam ny Posts: 401	Re: 6 cylinder 250 parts $135 shipped for p/s with header

06-15-2010, 09:58 PM	#14
k5blazin Senior Member Join Date: Oct 2009 Location: potsdam ny Posts: 401	Re: 6 cylinder 250 parts carb riser and hose $45 shipped

06-16-2010, 10:30 AM	#16
k5blazin Senior Member Join Date: Oct 2009 Location: potsdam ny Posts: 401	Re: 6 cylinder 250 parts i only accept paypal. please send email address and i will send a payment request



Register or Log In To remove these advertisements.

06-16-2010, 10:31 AM	#17
FL71C10 Registered User Join Date: Jun 2010 Location: Orlando, Florida Posts: 2,508	Re: 6 cylinder 250 parts How much for the PS setup without the headers. What mods were done on the ps bracket to clear the headers? Do you know what kind of headers they are? Trying to make sure they will fit my 71 c10 with 6 cyl 3 speed. Thanks!

06-16-2010, 09:34 PM	#19
k5blazin Senior Member Join Date: Oct 2009 Location: potsdam ny Posts: 401	Re: 6 cylinder 250 parts some more pics! powersteering pump is sold, i still have the brackets. pic shows the modification to clear header! Attached Images

06-16-2010, 10:41 PM	#20
FL71C10 Registered User Join Date: Jun 2010 Location: Orlando, Florida Posts: 2,508	Re: 6 cylinder 250 parts Could I get a price on the ps setup without the header? Thanks! __________________ 71 Chevy C10 Shortbed Stepside. LT1 with 4l60E. Just got back from painter, in assembly now.

06-16-2010, 11:01 PM	#21
seadonkey Registered User Join Date: Sep 2008 Location: Port Edwards wi Posts: 49	Re: 6 cylinder 250 parts How about the HEI setup, what would ya have to have for it shipped to a 54469 area code.

06-17-2010, 09:13 AM	#22
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,233	Re: 6 cylinder 250 parts I'll pass on the lifting brackets and dipstick. I had also asked about the flame arrestor (carb riser) and tube/hose, but it looks like dabruce15 got that. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

06-17-2010, 12:22 PM	#24
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,233	Re: 6 cylinder 250 parts dabruce15, thanks for the the tip, I'll check it out. What's the deal with the different heights? I have only ever seen the tall one before. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

06-17-2010, 01:25 PM	#25
STINEY Registered User Join Date: May 2008 Location: Bucyrus Ohio Posts: 32	Re: 6 cylinder 250 parts Are you parting with the clutch linkage stuff? Interested in everything including the block mount & frame pivot, z-bar, etc. Shipped to 44820 Thanks! __________________ Bucyrus, Ohio https://i.imgur.com/TeUPWqt.jpg

Register or Log In To remove these advertisements.