OR Parting 1973 Chevrolet K20 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

DLTruck1973 · 10-02-2015, 12:17 PM

Here is one we just got in to part. 1973 K20 350 4 barrel, 4 speed. Engine is gone but all external parts are here such as pulleys, brackets, nuts bolts, etc.

Please respond to the thread for items listed in the thread. If you don't see what you need, please ask as we may not have listed it or have it from another truck.

This one is going to be processed and gone quick.

All prices plus shipping.

Thank you for looking,
Thomas

Clutch linkage complete. Comes with everything from the clutch pedal to the throw out fork...$50.00

Power brake booster...$40.00
Grill, not perfect some chips...$40.00
Warn locking hubs...$100.00 for the pair.
Factory jack kit complete with all mounting hardware...$40.00

DLTruck1973 · 10-02-2015, 12:20 PM

Moderator(s) can you please repair my error on the title "Cevrolet" to "Chevrolet"

Thank you very much,
Thomas

**old Rusty C10** · 10-02-2015, 05:00 PM

first order of business editing done
Secondly I need the following parts off the core support
Spring and retainer that pops up hood
both rubber screw in hood height adjusters
seat belts all pieces
how much for both visors

If you will cut up the core support I need the pieces that go from above the spot where the support bolts to the frame on the outside to and including the outer grille mounts if you look in the picture of the rad support those bars that come clear over to the grille supports those smaller pieces in that second picture bolt to the whole thing I need ( somehow im going to have to weld it to a 79 support to make it work

**bhc41051** · 10-02-2015, 05:59 PM

I need one or more of these screws, they hold the cardboard tray behind the seat, a decent (73-75 I think without the mounting bolts) windshield washer reservoir. It looks like the OEM gas cap is missing but if you might have one from another truck. My zip is 43025.

********** Also need the windshield wiper arms and the glovebox if the plastic is not damaged**********

Super_Dave · 10-02-2015, 06:48 PM

Passenger inner fender - rust/cancer free and straight? $$$

Passenger door panel - crack and sun rot free (some chalking ok, it's going to be recovered but needs to be solid)? $$$

Core Support - rust/cancer free? $$$

Sabaka454 · 10-02-2015, 06:48 PM

How are the headlight bezels? I hate seeing these salvageable units dying

Sabaka454 · 10-02-2015, 06:49 PM

what about dash and dash bezel?

DLTruck1973 · 10-02-2015, 06:59 PM

Quote:

Originally Posted by old Rusty C10

first order of business editing done
Secondly I need the following parts off the core support
Spring and retainer that pops up hood
both rubber screw in hood height adjusters
seat belts all pieces
how much for both visors

If you will cut up the core support I need the pieces that go from above the spot where the support bolts to the frame on the outside to and including the outer grille mounts if you look in the picture of the rad support those bars that come clear over to the grille supports those smaller pieces in that second picture bolt to the whole thing I need ( somehow im going to have to weld it to a 79 support to make it work

Let me work on your list and get back to you Monday.

The truck has a very nice set of seat belts for $125.00

I will be back with you on Monday.

Thank you,
Thomas

**1774btcrew** · 10-02-2015, 08:16 PM

If this has a manual throttle, I will buy it

**TBONE1964** · 10-04-2015, 12:00 AM

I will answer all of your questions on Monday.

Have a good weekend,
Thomas

Vandals909 · 10-04-2015, 11:03 AM

Is truck a 2wd or 4x4?

**1774btcrew** · 10-04-2015, 11:58 AM

I will answer for him. The truck is a 4x4. K designates a 4x4 C designates a 2wd

DLTruck1973 · 10-04-2015, 12:02 PM

Quote:

Originally Posted by 1774btcrew

I will answer for him. The truck is a 4x4. K designates a 4x4 C designates a 2wd

Thank you for the answer. By the way I know that there is no manual throttle on this truck.

Thomas

**1774btcrew** · 10-04-2015, 12:11 PM

Quote:

Originally Posted by DLTruck1973

Thank you for the answer. By the way I know that there is no manual throttle on this truck.

Thomas

Thomas, thanks for getting back to me so quickly. I appreciate the response! Good luck on the part out! You always have fair prices!

Super_Dave · 10-05-2015, 02:31 AM

Still wondering about these...

Quote:

Originally Posted by Super_Dave

Passenger inner fender - rust/cancer free and straight? $$$

Passenger door panel - crack and sun rot free (some chalking ok, it's going to be recovered but needs to be solid)? $$$

Core Support - rust/cancer free? $$$

74CustomK20 · 10-05-2015, 04:25 AM

PM sent.

DLTruck1973 · 10-05-2015, 12:23 PM

Quote:

Originally Posted by old Rusty C10

first order of business editing done
Secondly I need the following parts off the core support
Spring and retainer that pops up hood
both rubber screw in hood height adjusters
seat belts all pieces
how much for both visors

If you will cut up the core support I need the pieces that go from above the spot where the support bolts to the frame on the outside to and including the outer grille mounts if you look in the picture of the rad support those bars that come clear over to the grille supports those smaller pieces in that second picture bolt to the whole thing I need ( somehow im going to have to weld it to a 79 support to make it work

Here you go:

Secondly I need the following parts off the core support
Spring and retainer that pops up hood $10.00
both rubber screw in hood height adjusters Rubber is dry but there $10.00 for the pair
seat belts all pieces $125.00 for the set. They are pretty nice.
how much for both visors They are there but not in great condition. I have seen worse. $30.00 for the pair

Plus shipping on all above.

I am sorry but we are not going to cut this core support up at this time.

Let me know and thank you for the interest,
Thomas

DLTruck1973 · 10-05-2015, 12:31 PM

Quote:

Originally Posted by Super_Dave

Passenger inner fender - rust/cancer free and straight? $$$

Passenger door panel - crack and sun rot free (some chalking ok, it's going to be recovered but needs to be solid)? $$$

Core Support - rust/cancer free? $$$

Hi Dave,

No good on passenger inner Dave. Has front battery rot like most.

Passenger door panel may be OK for you. No cracks that I can see. Has some scratches on the top of it (like dog claw marks???) I would sell for $35.00 plus shipping

Core support is really soft on the bottom pass side near the inner fender area.

Let me know on door panel.

Thank you,
Thomas

DLTruck1973 · 10-05-2015, 12:50 PM

Quote:

Originally Posted by bhc41051

I need one or more of these screws, they hold the cardboard tray behind the seat, a decent (73-75 I think without the mounting bolts) windshield washer reservoir. It looks like the OEM gas cap is missing but if you might have one from another truck. My zip is 43025.

********** Also need the windshield wiper arms and the glovebox if the plastic is not damaged**********

Here you go:

Nothing on the screws for the cardboard tray.

I have a decent washer jug (fits in a slot in the fender) Holds liquid for $15.00
I have a decent 73 gas cap for $12.50
I have a decent set of wiper arms from a 76 for $25.00 for the pair.
I have a decent glove box door. You will need your lock/latch. $15.00. It is the same color as the truck in thread. plastic is good. I also have other ones in different colors. Not sure what colors but I can check.

All prices plus shipping.

Let me know.

Thank you,
Thomas

**bhc41051** · 10-05-2015, 01:06 PM

I'll take them, PM sent

DLTruck1973 · 10-05-2015, 01:06 PM

Quote:

Originally Posted by Sabaka454

How are the headlight bezels? I hate seeing these salvageable units dying

Not on this truck but I have a decent pair of these (some minor pitting) for $30.00 plus the shipping.

DLTruck1973 · 10-05-2015, 01:11 PM

Quote:

Originally Posted by Sabaka454

what about dash and dash bezel?

The bezel is not good. It has been cut in the storage tray area.

The gauge cluster has a broken mounting tab on drivers side. I would take $35.00 plus shipping for it. It does not look bad but does need cleaned.

Let me know and thank you,
Thomas

DownLowHoe · 10-06-2015, 02:34 PM

I'll take the seat belts if old Rusty passes.

I would like pics of woodgrain cluster bezel if it has one...and price please.

DLTruck1973 · 10-06-2015, 05:04 PM

Quote:

Originally Posted by DownLowHoe

I'll take the seat belts if old Rusty passes.

I would like pics of woodgrain cluster bezel if it has one...and price please.

You are second on the seat belts. I will let you know soon. To be fair, I will give old Rusty C10 until end of day tomorrow to decide.

No wood grain bezel for a 73/74 truck.

Thank you for the interest,
Thomas

**old Rusty C10** · 10-06-2015, 06:34 PM

Quote:

Originally Posted by DLTruck1973

Here you go:

Secondly I need the following parts off the core support
Spring and retainer that pops up hood $10.00
both rubber screw in hood height adjusters Rubber is dry but there $10.00 for the pair
seat belts all pieces $125.00 for the set. They are pretty nice.
how much for both visors They are there but not in great condition. I have seen worse. $30.00 for the pair

Plus shipping on all above.

I am sorry but we are not going to cut this core support up at this time.

Let me know and thank you for the interest,
Thomas

at this point I think im going to take a pass if you decide to cut up the core support let me know im trying to get one whole package together to finish up here

10-02-2015, 12:17 PM	#1
DLTruck1973 Registered User Join Date: Jan 2015 Location: Junction City OR Posts: 1,758	Parting 1973 Chevrolet K20 Here is one we just got in to part. 1973 K20 350 4 barrel, 4 speed. Engine is gone but all external parts are here such as pulleys, brackets, nuts bolts, etc. Please respond to the thread for items listed in the thread. If you don't see what you need, please ask as we may not have listed it or have it from another truck. This one is going to be processed and gone quick. All prices plus shipping. Thank you for looking, Thomas Clutch linkage complete. Comes with everything from the clutch pedal to the throw out fork...$50.00 Power brake booster...$40.00 Grill, not perfect some chips...$40.00 Warn locking hubs...$100.00 for the pair. Factory jack kit complete with all mounting hardware...$40.00 Attached Images

10-02-2015, 12:20 PM	#2
DLTruck1973 Registered User Join Date: Jan 2015 Location: Junction City OR Posts: 1,758	Re: Parting 1973 Cevrolet K20 Moderator(s) can you please repair my error on the title "Cevrolet" to "Chevrolet" Thank you very much, Thomas

10-02-2015, 05:00 PM	#3
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,277	Re: Parting 1973 Chevrolet K20 first order of business editing done Secondly I need the following parts off the core support Spring and retainer that pops up hood both rubber screw in hood height adjusters seat belts all pieces how much for both visors If you will cut up the core support I need the pieces that go from above the spot where the support bolts to the frame on the outside to and including the outer grille mounts if you look in the picture of the rad support those bars that come clear over to the grille supports those smaller pieces in that second picture bolt to the whole thing I need ( somehow im going to have to weld it to a 79 support to make it work Attached Images __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

10-02-2015, 05:59 PM	#4
bhc41051 Senior Member Join Date: Apr 2012 Location: Otway OH Posts: 788	Re: Parting 1973 Chevrolet K20 I need one or more of these screws, they hold the cardboard tray behind the seat, a decent (73-75 I think without the mounting bolts) windshield washer reservoir. It looks like the OEM gas cap is missing but if you might have one from another truck. My zip is 43025. ******** Also need the windshield wiper arms and the glovebox if the plastic is not damaged******** Attached Images Last edited by bhc41051; 10-04-2015 at 04:54 AM. Reason: content

10-02-2015, 06:48 PM	#5
Super_Dave Registered User Join Date: Jul 2014 Location: Sherwood, Oregon Posts: 974	Re: Parting 1973 Chevrolet K20 Passenger inner fender - rust/cancer free and straight? $$$ Passenger door panel - crack and sun rot free (some chalking ok, it's going to be recovered but needs to be solid)? $$$ Core Support - rust/cancer free? $$$ __________________ --Project BABA YAGA!... http://67-72chevytrucks.com/vboard/s...d.php?t=655783 --Project BABA YAGA!... http://67-72chevytrucks.com/vboard/s...ghlight=Belair "Life is tough - wear a cup!" "Old Enough to Know Better - Too Young to Resist" "Junk is something you will need three weeks after you throw it away."

10-02-2015, 06:48 PM	#6
Sabaka454 Registered User Join Date: Jul 2005 Location: CT Posts: 276	Re: Parting 1973 Chevrolet K20 How are the headlight bezels? I hate seeing these salvageable units dying

10-02-2015, 06:49 PM	#7
Sabaka454 Registered User Join Date: Jul 2005 Location: CT Posts: 276	Re: Parting 1973 Chevrolet K20 what about dash and dash bezel?

10-02-2015, 08:16 PM	#9
1774btcrew Senior Member Join Date: Jun 2009 Location: Phoenix AZ Posts: 4,543	Re: Parting 1973 Chevrolet K20 If this has a manual throttle, I will buy it __________________ AZPartsLocators on Instagram 1972 Cheyenne Super Short Bed big block "Blackie" 1977 Crew Cab GMC Short bed with 4BT Intercooled Cummins Diesel and a 4L80e "The Junkyard Dog" 1985 Crew Cab Chevy dually with 5.9 Cummins "The Big Dog" This is what my dad liked to be called by the grandkids before he passed so it seems fitting for his old truck.

10-04-2015, 12:00 AM	#10
TBONE1964 Cluster King Join Date: Nov 2012 Location: Junction City, OR Posts: 5,263	Re: Parting 1973 Chevrolet K20 I will answer all of your questions on Monday. Have a good weekend, Thomas __________________ Contact me on all of your gauge cluster needs. I specialize in restoration, repair and parts sales for 67-72 Chevy and GMC trucks. email me at tbonegarris@yahoo.com I am also a dealer for Counterpart for gauge cluster parts only. Also see my facebook page, CG&C

10-04-2015, 11:03 AM	#11
Vandals909 Registered User Join Date: Sep 2005 Location: So. Cal Posts: 321	Re: Parting 1973 Chevrolet K20 Is truck a 2wd or 4x4?

10-04-2015, 11:58 AM	#12
1774btcrew Senior Member Join Date: Jun 2009 Location: Phoenix AZ Posts: 4,543	Re: Parting 1973 Chevrolet K20 I will answer for him. The truck is a 4x4. K designates a 4x4 C designates a 2wd __________________ AZPartsLocators on Instagram 1972 Cheyenne Super Short Bed big block "Blackie" 1977 Crew Cab GMC Short bed with 4BT Intercooled Cummins Diesel and a 4L80e "The Junkyard Dog" 1985 Crew Cab Chevy dually with 5.9 Cummins "The Big Dog" This is what my dad liked to be called by the grandkids before he passed so it seems fitting for his old truck.

10-05-2015, 04:25 AM	#16
74CustomK20 Registered User Join Date: Oct 2014 Location: Tell City, IN Posts: 637	Re: Parting 1973 Chevrolet K20 PM sent. __________________ Big Nate Carp. Local 224. Buy made in the USA! 03 F350 6.0 Daily Race Truck. 79 C70 366 Project Dump.

10-05-2015, 01:06 PM	#20
bhc41051 Senior Member Join Date: Apr 2012 Location: Otway OH Posts: 788	Re: Parting 1973 Chevrolet K20 I'll take them, PM sent

10-06-2015, 02:34 PM	#23
DownLowHoe Registered User Join Date: May 2005 Location: Orlando Posts: 205	Re: Parting 1973 Chevrolet K20 I'll take the seat belts if old Rusty passes. I would like pics of woodgrain cluster bezel if it has one...and price please.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.